REPAIRS TO PLUMBING AND MISC REPAIRS IN SV, NCsE, CAMP-II, KGP AND ADJOINING AREA AT AF STN KALAIKUNDA

Amount

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 5mm thick cement plaster in CM 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10mm thick cement plaster in CM 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick cement plaster in CM 1:4 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and as directed.

M&L for preparation of new plaster surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Demolition of cement concrete in ground floors (including tiles/floor finishes) and pavings n exc 15 cm thickness (Below or above GL), complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth using extra cement complete all as specified and as directed.

M & L for 38mm width glass dividing strips, 3mm thick for flooring inserted in position, conform to design, complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in Plinth protection etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land, complete all as specified and as directed.

M&L for screed bed or bedding layer in CM 1:4, 20mm thick for laying floor finishes, complete all as specified and as directed.

M&L for screed bed or bedding layerin CM 1:3, 10mm thick for laying wall /dado/skirting tiles, complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles7to 8 mm thick(square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor,set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x200 x7mm thick but as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match, such as skirting/dado, complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and as directed.

M&L for renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed.

M&L for securing glass of any description in existing steel frames glazed with putty including removing loose or decayed putty, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured), complete all as specified and as directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or ground/obscured type sheet glass, 4mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed

Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed

Taking down shutters of any description exc 2 sqm and refixing in the same opening after necessary easing & adjusting/resizing complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in the same opening after necessary easing & adjusting/resizing complete all as specified and as directed.

M&L for cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick complete all as specified and as directed.

M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0, complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed.

S & F factory made solid PVC moulded door shutter with particle board shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and as directed.

S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:2:4 Type B-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame, complete all as specified and as directed.

S & F 35 mm thick second class hard wood, plain framed, panelled shutters (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, complete all as specified and directed.

S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauzed etc sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, complete all as specified and as directed.

M&L for shutters of any description exc 1 sqm and n exc 2 sqm each resecuring or easing & adjusting without taking down, complete all as specified and as directed.

M&L for beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads to store of 1st class hard wood, complete all as specified and as directed.

M&L for plywood, grade BWR, type BB, fixed with screws to timber frame work 6mm thick, complete all as specified and as directed.

M&L in repairs 18mm thick Prelaminated particle board interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws including fitting and fixtures etc complete all as specified and as directed.

S & F in repairs hasp and staple, mild steel, wire type, aliminium anodised, including bolt to hinge plate and fixed with screws of size 100mm ISI marked, complete all as specified and as directed.

S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, cast type anodised , ISI marked complete all as specified and as directed.

S&F 125 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 125 mm of extruded section and fixed, complete all as specified and as directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI mark, complete all as specified and as directed.

S&F 75mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI mark, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and as directed.

S&F in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified and as directed.

S&F in repairs for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and as directed.

S & F in repairs mild steel peg stays, size 300mm for steel windows complete all as specified and as directed.

S & F in repairs mild steel handle/ locking system for steel windows complete all as specified and as directed.

S&F in repairs 20mm dia curtain rod chromium plated including brackets, stay etc complete all as specified and as directed.

Dismantling structural steel work including doors, gates, ladders, rolling shutters but excluding framed truss etc complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator partly fixed and partly openable with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S & F in repairs stop valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore, complete all as specified and as directed.

All as per item No 69 here in before but but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed, complete all as specified and as directed.

S & F in repairs PVC waste pipe 32MM dia of length 900m m PTMT complete all as specified and as directed.

S&F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets, complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including 32mm dia waste coupling, brass, chromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern long pan size 630 x 450mm with CI trap long neck 100mm with integral foot rest & fixing incl but (excluding flushing cistern and flush pipe) making good floor to match complete all as specified and as directed.

S & F plastic water closet white seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed

S & F in repair brass cromium plated overhead shower rose 125mm size swivel type 15mm bore complete all as specified and as directed.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern, complete all as specified and as directed.

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets, complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Dismantling water tank any type and any position from site of capacity 500 litres, complete all as specified and as directed.

Dismantling water tank 1000 ltr and removing from site complete all as specified and as directed.

S&F 500 Ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position, complete all as specified in SSR Part-I and as directed.

S&F 1000ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position complete all as specified in SSR Part-I and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.

S&F PVC ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls, including necessary clamps, mut, bolts etc., complete all as specified and as directed.

S&F 100mm dia PVC (SWR) pipes single socketed, in any length fixed to walls, including necessary clamps, mut, bolts etc., complete all as specified and as directed.

S & F 110mm dia PVC (SWR) bend pipe any radius with access door, complete all as specified and as directed

S & F 75 mm dia PVC (SWR) bend pipe any radius with access door, complete all as specified and as directed

S & F 75 mm dia PVC (SWR) vent cowl, complete all as specified and as directed

S & F 110 mm dia PVC (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and as directed

S & F 110mm dia PVC (SWR) bend pipe any radius without access door, complete all as specified and as directed

S & F shoe suitable for 110mm dia PVC (SWR) pipe , complete all as specified and as directed

S & F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal wirh access door, complete all as specified and as directed

S & F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and as directed

S & F 75 mm dia PVC (SWR) bend pipe any radius with access door, complete all as specified and as directed

S & F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and as directed

M&L for welding in repairs thickness not exceeding 6mm complete all as specified and as directed.

Dismantling of asbestos cement corrugated/ semi corrugated sheet as in roof covering ccomplete all as specified and as directed.

M&L 6mm thick asbestos cement,cement corrugated or semi corrugated sheet as in roofing fixed with ' L' type or 'J' type hooks or cranked bolts in roofs, walls, complete all as specified and as directed.

S&F asbestos cement two piece serrated ridges for corrugated or semi corrugated sheet fixed with 'L' hooks or cranked bolt complete all as specified and as directed.

S&F for steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F in repairs Door seal (Snake guard) with Aluminium frame complete all as specified and as directed.

M/S C C CONSTRUCTION

SUMAN CONSTRUCTION

M/S Jamuna Traders