REPAIR MAINT PAINTING OF STEEL FURNITURE UNDER BSO AT GE FAIZABAD

Amount

REPAIRS TO ALMIRAH LARGE STEEL/ALMIRAH STEEL MEDUIM STEEL/LOCKER MEDIUM STEEL/LOCKER BESIDE STEEL (SINGLE/ DOUBLE DOOR) (FD-1031,FD-1032,FD-1029). Taking out old unseviceable locks and S&F new locks 4 lever (Make-LICO/Rina/Nova/Harrison) with double key & fixing with & including 4mm dia suitable screws complete all as shown in drawing specified and directed by Engr-in- Charge.

Taking out old unserviceable handle CI 100 mm and S&F new handle CI 100 mm long Godrej Pattern complete all as shown in drawing specified and directed by Engr-in- Charge.

Taking out old unserviceable 3 way locking device of 10mm dia MS rod & brass shackles and S&F new 3 way locking device of 10mm dia MS rod & brass shackles complete all as shown in drawing specified and directed by Engr-in- Charge

Taking out old unserviceable legs and S&F new MS legs for Almirah Large/Medium Steel complete all as shown in drawing specified and directed by Engr-in- Charge

Taking out old unserviceable clamps with nuts and bolts with washers for shelves complete all as shown in drawing specified and directed by Engr-in- Charge

Taking out old unserviceable shelves and S&F new shelves made out of 20 gauge MS sheet complete all as specified in drg and directed by Engr-in- Charge.

Taking out old unserviceable aluminum hanging rod or hanging pegs with brackets and S&F new aluminum hanging rod or hanging pegs with brackets for Locker Bedside Steel (Single/Double door) complete all as shown in drawing specified and directed by Engr-in- Charge.

Preparation of existing decorated surface of the (Locker Bedside Steel Single door) including shelves by removing all dents filling with putty and spray painting one coat of olive green synthetic enamel paint( external & Internal surface) complete all as specified and directed by Engr-in-Charge colour shade as approved by GE

All as per item No. 08 Locker Bedside Steel Double door.

All as per item No. 08 Almirah Medium Steel

All as per item No. 08 Almirah Large Steel

REPAIR TO CHAIR CB STEEL WITH ARMS (FD-75 (M). S&F Seat for chair CB Steel made out of 1st class HW (Shisham) frame size 460 mm x 440 mm, having members of section size 40 mm x 25 mm duly caned with 2 mm half round plastic cane not more than 5 mm apart and bordered with 3 mm half round plastic cane and including painting with two coats of black colour synthetic enamel paint over a coat of pink primer preparation of surfaces and fixing to chair with 75 mm long full threaded steel screws, washers and nut bolt including taking down existing unserviceable seat all as shown in drawing specified and directed by the Engr-in- Charge for chair CB Steel with arms & without arms.

Taking out old unserviceable Back of chair CB Steel and S&F new Back of chair CB Steel with 75 mm long full threaded steel screws, washers and nut bolt for chair CB Steel with arms & without arms complete all as shown in drawing specified and directed by the Engr-in- Charge .

Taking out old unserviceable arms rest and S&F new arms rest made out of 1st class hard wood (shisham) made shape and fixed in position with suitable steel screws complete all as shown in drawing specified and directed by Engr-in- Charge.

Taking out old unserviceable mild steel runner and S&F new mild steel runner support with running welding for joining conduit made out of FI 25 mm x 4 mm shall be provided with welding and screws for chair CBA steel with arms & without arms complete all as shown in drawing specified and directed by Engr-in- Charge.

Taking out old unserviceable rubber shoe and rubber cap with steel screws where required with S&F new hard PVC rubber shoe and rubber cap of superior quality with suitable steel screws complete all as shown in drawing specified and directed by Engr-in- Charge.

Prepration of existing steel surface of the frame of the Chair CB Steel with arms and spray painting with one coat of synthetic enamel paint of steel frame in black colour or colour approved by GE complete all as specified and directed by Engr-in- Charge

REPAIR TO CHAIR CB STEEL WITHOUT ARMS (FD-75 (M). S&F Seat for chair CB Steel made out of 1st class HW (Shisham) frame size 460 mm x 440 mm, having members of section size 40 mm x 25 mm duly caned with 2 mm half round plastic cane not more than 5 mm apart and bordered with 3 mm half round plastic cane and including painting with two coats of black colour synthetic enamel paint over a coat of pink primer preparation of surfaces and fixing to chair with 75 mm long full threaded steel screws, washers and nut bolt including taking down existing unserviceable seat all as shown in drawing specified and directed by the Engr-in- Charge for chair CB Steel with arms & without arms.

Taking out old unserviceable Back of chair CB Steel and S&F new Back of chair CB Steel with 75 mm long full threaded steel screws, washers and nut bolt for chair CB Steel with arms & without arms complete all as shown in drawing specified and directed by the Engr-in- Charge

Taking out old unserviceable mild steel runner S&F new mild steel runner support with running welding for joining conduit made out of FI 25 mm x 4 mm shall be provided with welding and screws for chair CBA steel with arms & without arms complete all as shown in drawing specified and directed by EIC.

Taking out old unserviceable rubber shoe and rubber cap with steel screws where required with S&F new hard PVC rubber shoe and rubber cap of superior quality with suitable steel screws complete all as shown in drawing specified and directed by EIC.

Prepration of existing steel surface of the frame of the Chair CB Steel with out arms and spray painting with one coat of synthetic enamel paint of steel frame in black colour or colour approved by GE complete all as specified and directed by EIC..

REPAIR TO CHAIR CB SPECIAL WITH HAND REST (TP). Taking out old unserviceable PVC moulded Seat of Chair CB special with hand rest and S&F new PVC moulded seat as per sample (Make:- Nilkamal CHR-10) complete all as shown on drawing as specified & directed by Engr-in-Charge.

Taking out old u/s hand rest and S&F new hand rest 12 mm shisham wood plank of size 400 x 300 mm with around PVC beading as per sample complete all as shown on drawing as specified & directed by Engr-in-Charge.

Gas Welding of joints of Mild Steel Pipe iron frame complete all as specified and directed.

M & L two coats of black synthetic enamelled paint to old/new surface of Chair CB Special with hand rest complete all as shown on drawing as specified & directed by EIC.

REPAIR TO TEAPOY VERANDAH (TP):- Taking out carefully old existing broken top of teapoy verandah of any description in any position and replacement of the same with S&F new Top with 18mm thick pre-laminated wood particles board (Make: NOVAPAN & NEPAL BOARD) exterior grade BWP melamine faced, flat pressed, three layered, bonded with phenol formaldehyde synthetic resin , ISI marked with 6mm thick teak wood beading allround made to shape fixed in position on new surfaces complete all as shown in drawing specified and directed by Engr-in-Charge.

Preparation of existing painted surface of teapoy verandah and applying two coats of white paint wooden surface (after welding if required) complete all as specified and direceted by Engr-in-Charge.

Taking out old unserviceable hard rubber shoe and S&F New PVC hard rubber shoe of best quaility for teapoy verandah complete all as specified and directed by Engr-in-Charge.

Welding :-Gas Welding/welding of joints of Mild Steel Pipe complete all as shown on drawing as specified & directed by Engr-in- Charge.

REPAIR TO CHAIR COMPUTER (FD-E6/MAP/01):- Taking out old unserviceable back of computer chair and S&F new 12mm thick hot pressed plywood upholistered with fabric and moulded polyurethane foam. The back form shall be designed with contour tumber support for extra comfort wtih PVC lipping all around, size & shape as per drawing complete all as specified and directed by Engr-in-Charge

All as per item No 31 but seat of Chair Computer

Taking out old unserviceable hand rest of computer chair and S&F new hand rest black integral skin polyurethane reinforced with MS insert it shall be scratch and weather resistant size & shape as per drawing complete all as specified and directed by Engr-in-Charge

Taking out old unserviceable pedestal assy of injection moulded in black 30% glass filled nylon . A 10.5mm dia fired bright zinc plated. MS castor pin is of pressfitted into each prong for holding the castors. It is 600 mm pitch-centre dia (complete with wheel). size & shape as per drawing complete all as specified and directed by Engr-in-Charge. Note:- (a) Synchro Tilting :- Adjustable tiling mechanism to be designed with forward tilt, self regulating tilt tension+manual override, 4 position tilt lock, Anti-shock back machanism to prevent backrest rom hitting the user when the lock released. 360 swivel mechanism to allow fluid lateral movement. (b) Gas Lift:- Maintenance free environmental friendly, chrome free cylinder tube shall be fixed in a M S black powder coated outer central column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300 N force should under go an impact test.

REPAIR TO TABLE OFFICE CLERK STEEL (FD-1004 & FD-381). Taking out old unserviceable drawer of table office cleark steel and S&F new drawer of size as specified, made out of MS sheet 1 mm thick & applying two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting & duly welded all as specified, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Taking out old unserviceable lock for drawer of table office clerk steel and S&F new brass lock with 02 keys (Make: Godrej/Harrison), complete all as shown on drawing as specified & directed by EIC.

Taking out old unserviceable rusted/damaged bottom leg portion 100 mm of table office cleark steel and S&F new leg portion by running welding 100 mm square tube of 25 mm size & 16 gauge, complete all as shown on drawing as specified & directed by EIC.

Taking out old unserviceable top of table office clerk steel and S&F new top of size 1200 mm x 600 mm made out of 18/19mm prelaminated particle board (Make: NOVAPAN & NEPAL BOARD), edges duly covered with 6 mm thick teak wood beading including polishing, complete all as shown on drawing as specified & directed by Engr-in-Charge.

Taking out old unserviceable hard rubber ring/shoe cap with steel screws where required and S&F new hard rubber ring/shoecap of superior quality fixed with screws (steel) where required of suitable size to the bottom of leg complete all as approved and shown on drawing by Engr-in-Charge.

Preparation of existing decorated surface of the Table Office Clerk Steel including shelves and drawers by removing all dents filling with putty and spray painting one coat of olive green synthetic enamel paint (external & Internal surface) complete all as specified and directed by Engr-in-Charge colour shade as approved by GE.

REPAIR TO TABLE OFFICE OFFICERS STEEL (FD-1003). Taking out old unserviceable drawer of table office officers steel and S&F new drawer of size as specified, made out of MS sheet 1 mm thick & applying two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting & duly welded all as specified, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Taking out old unserviceable lock for drawer of table office officers steel and S&F new brass lock with 02 keys (Make: Godrej/Harrison), complete all as shown on drawing as specified & directed by Engr-in- Charge.

Taking out old unserviceable rusted/damaged bottom leg portion 100 mm of table office officers steel and S&F new leg portion by running welding 100 mm square tube of 25 mm size & 16 gauge,replacement of hard rubber toes to the bottom of legs with new toes, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Taking out old unserviceable top of table office officer steel and S&F new top of size 1680 mm x 870 mm made out of 18/19mm prelaminated particle board (Make: NOVAPAN & NEPAL BOARD), edges duly covered with 6 mm thick teak wood beading including polishing, complete all as shown on drawing as specified & directed by EIC.

Taking out old unserviceable hard rubber ring/shoecap with steel screws where required and S&F new hard rubber ring/shoecap of superior quality fixed with screws (steel) where required of suitable size to the bottom of leg complete all as approved and shown on drawing by Engr-in-Charge.

Preparation of existing decorated surface of the Table Office Officers Steel including shelves and drawers by removing all dents filling with putty and spray painting one coat of olive green synthetic enamel paint (external surface) complete all as specified and directed by Engr-in-Charge colour shade as approved by GE.

REPAIR TO TABLE DINING ORs (FD-165): Taking out old unserviceable top of table dining ORs and supply and fixing new table tops of size 1900 x 700 mm made of 19 mm thick block board grade 1 quality exterior grade commercial type duly covered with 24 gauge thick aluminium sheet as shown on drg and as directed including one coat of black synthetic enamel paint to steel frame and legs and replacement of hard rubber toes to the bottom of legs with new toes, aluminium sheet shall be fixed with steel nail at 150 mm spacing both side and block board shall be fixed to frame with adhesive and steel screws of required size and as shown on drawing complete all as specified and directed by Engr-in-charge.

Taking out unserviceable rusted/ damaged bottom 100 mm leg portion of table dining OR's and S&F new leg portion by running welding 100 mm of square tube of 25 mm size as shown on drawing complete all as specified and directed by Engr-in-charge.

Welding :-Gas Welding/welding of joints of Mild Steel Pipe complete all as shown on drawing as specified & directed by Engr-in- Charge

REPAIR TO CHARPOY GI PIPE FITTED WITH PLY TOP (FD-220). Taking out old U/S long rail from existing GI charpoy and S&F new thread long rail size: 1980 mm long, 32 mm dia medium grade GI Pipe (ISI Mark) IS No: 1239 Part I (MAKE: TATA, JINDAL, PRAKASH) complete all as specified & directed by Engr-in- Charge.

Taking out old unserviceable short rail from existing GI charpoy with new shorts rails (size: 900 mm) made of old broken long rails, obtained from Ser No 50 above and all as per drg and specification.

Taking out old unserviceable leg from existing GI charpoy with and long rail new leg (size: 440 mm) made out of old broken short rail and welded new cup of MNF set and fixing GI Shoes/gitties same as existing legs of charpoy.

Taking out old unserviceable MS plate and S&F 3 mm thick and 25mm dia MS Plate welded to bottom of each leg of charpoy GI Ply top including grinding of extra material complete all as specified & directed by Engr-in-Charge.

Taking out old unserviceable MS Clamp and S&F new MS clamp for FMN Set at legs of Charpoy GI pipe fitted with ply wood complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable 3 way GI elbow from existing GI charpoy and supply & fix new three way GI elbow , 32 mm bore (fully housed) and 70mm long, all as specified & as directed.

Taking out old unserviceable check nut from existing GI charpoy and supply & fix new GI hexagonal check nut 32 mm dia 10 mm wide thickness of check nut shall not be less than 6 mm all as specified & as directed.

Taking out old unserviceable ply wood of GI charpoy and S&F new ply wood 12 mm thick of size 3' X 6'-3" to 6'-6" (approx) . New ply wood (Make: SUDARSHAN PLYWOOD, KITPLY, GREENPLY, CENTURY PLY WOOD & SWATICK PLY WOOD) BWR ISI marked with 10 Nos of nut and bolt over GI pipe Charpoy, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Removing existing flat iron at corner and square tube/flat iron in centre of charopy and refixing after necessary repair, complete all as shown on drawing as specified & directed by Engr-in- Charge.

REPAIR TO TABLE CENTRE BRASS LEG WITH GLASS (FD-375). Taking out old broken/unserviceable glass top of size 1200mm long and 600mm wide and S&F new Glass top for Table Centre Brass leg with glass shall be of 10mm thick plate tined glass (white colour) with corner rounded as shown on drawing.

Taking out old broken/unserviceable Vaccum rubber shoes and S&F new Vaccum rubber shoes as shown on drawing.

Taking out old broken/unserviceable PVC shoes and S&F new PVC shoes for Table Centre Brass leg with glass as shown on drawing.

REPAIR TO CHAIR STEEL PADDED WITH ARM (TP). Taking out old unserviceable Seat of Chair Steel Padded with arm and S&F new Seat of size 450 mm x 450 mm, made out of 9mm ply wood at bottom and cushion with cover, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Taking out old unserviceable Back of Chair Steel Padded with arm and S&F new Back of size 450 mm x 550 mm, made out of 9mm ply wood at bottom and cushion with cover, complete all as shown on drawing as specified & directed by EIC.

Taking out old unserviceable padded arm hand rest of Chair Steel Padded with arm hand rest and S&F new Padded arm of size as specified, complete all as shown on drawing as specified & directed by Engr-in- Charge.

M & L two coats of black synthetic enamel paint to old/new surface of Chair Steel Padded with arm, complete all as shown on drawing as specified & directed by Engr-in- Charge.

Welding :-Gas Welding/welding of joints of Mild Steel Pipe and flat iron frame complete all as shown on drawing as specified & directed by Engr-in- Charge.

REPAIR TO TABLE STEEL 3'x3' (900x900x760mm/900x900x735mm)(FD-291 & 1009). Taking out old unserviceable top of table 900 mm x 900 mm and S&F new top of size 900 mm x 900 mm made out of 18/19mm pre-laminated particle board, edges duly covered with 6 mm thick teak wood beading complete all as shown on drawing as specified & directed by Engr-in-Charge.

Taking out old unserviceable rusted/damaged bottom leg portion 100 mm of table office officers steel and S&F new leg portion by running welding 100 mm square tube of 25 mm size & 16 gauge,replacement of hard rubber toes to the bottom of legs with new toes, complete all as shown on drawing as specified & directed by EIC.

Taking out old unserviceable hard rubber ring/shoe cap with steel screws where required and S&F new hard rubber ring/shoecap of superior quality fixed with screws (steel) where required of suitable size to the bottom of leg complete all as approved and shown on drawing by Engr-in-Charge.

M & L two coats of black synthetic enamelled paint old and two coats to new surface including preparation of surface of table 900mm x 900mm complete all as shown on drawing as specified & directed by Engr-in-Charge.

Supreme Builders

Saket Traders

Khan Brothers