Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 and Most Reasonable | |
| 2 | L2₹4.3 L+₹37,635 (9.68%)Rejected-Finance VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | L2 | Rejected-Finance Being Not L1 |
Tender Value
Refer Docs
EMD Value
₹10,600
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) DALHOUSIE
AGE(I) DALHOUSIE PIN-176305
SPL REPAIR TO BLDG NO T 38 CLERK LINE AND B 120 AT HQ 323 MTN BDE UNDER AGE I DALHOUSIE
2022_MES_562733_2
8916/2022-23/E8
Open Tender
Civil Works
Item Rate
90 days
AGE(I) DALHOUSIE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
AGE(I) DALHOUSIE
₹10,600
Yes
AGE(I) DALHOUSIE
16 Mar 2023
21 Dec 2022
14 Jan 2023
21 Dec 2022
12 Jan 2023
29 Dec 2022
21 Dec 2022 - 24 Dec 2022
24 Dec 2022
Amount
Taking down chaukhats or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each .
S&F 2nd class hard wood, plain, solid straight chowkhats and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.
S&F Factory Made 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhats.
S&F Factory Made 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc
Two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described including preparation(Make : Goodlass Nerolac Paints, Berger Paint, Asian Paints)
S&F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 150mm long aluminium handles cast type, anodised and fitted.
S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and as directed.
Dismantling plain or corrugated sheets of any description or thickness and gauge as in roof covering complete all as specified..
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make:-JSW STEEL/TATA SHAKT I/ Everest
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make:-JSW STEEL/TATA SHAKT I/ Everest
Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
RR masonry with best quality locally available stone uncoursed, well bonded, bedded, solidly hearted and built in CM 1:4 complete all as specified.
All as per item No 16 above but except stones
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level (unreinforced).
M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified and directed.
Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc .
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified.
M&L for applying two coats of cement base paint over priming plastered surfaces with JK primer priming coat complete all as specified.(Make : Snocem, Asian, Berger)
M&L for applying two coats of oil bound distemper on wall on new plasted surfaces including preparation over a coat of Birla wall putty and a coat of JK Primer all as specified {(Make : Goodlass Nerolac (Super Acrylic), Asian Paints(Tractor Acrylic Distemper), Berger Paints (Bison Super)}
M&L for Two coat of cement base paint on old plastered surface of wall after the necessary preparation. (Make : Snocem, Asian, Berger)
M&L for Preparing old plastered surfaces of wall by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper etc all as specified .
Preparation of old treated wood and wood based surfaces including cleaning, stopping and rubbing down of any description over 10 cm width or girth and applying one coat of synthetic varnish complete all as specified.
Cement concrete 1:2:4 type B1 ( using 20 mm crushed stone agg.) as in floor 40 mm thick as levelling course rough finish to receive top finishes all as specified to recd top finishing complete all as specified.
M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc all as specified.
M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, Set cover etc including making good to floor where required all as specified.(Make : Parryware, Hindustan Sanitary Ware, Cera)
S&F in repair PVC valveless syphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and CP handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long all as directed by Engineer in charge.{(Make : Slimline(Parryware), Commander(Water bird), Hindustan Sanitaryware}
S&F in repairs, self cleaning water jet, chromium plated, Fancey Type high qualitey (HEALTHFUSET)15 mm bore ABC Body mild steel CP with 1.25 mtr ong flexible tube and ABS wall hook including making connections and fixied complete
S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions all as specified.
S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specifiedscrewed for iron pipe or brass ferrule. All as specified.
Dismantling wrought iron or mild steel work of any description not other wise provided.
S&F mild steel flat iron 40x5 mm for wind tie confirming to Fe 410-o or Fe 310-0
Dismantling wall and ceiling boards any thickness including cover fillets.
S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement)Perforated particleboard/tiles of 12mm thick for insula-tion and accoustic purposes, as in ceilings flat or sloping 60x60 cm in size complete all as specified and as directed.
Havish Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .