SPECIAL REPAIR TO FOUR GUEST ROOM NO 2,4,6 AND 8 OF MAIN BLOCK AND PASSAGE SHED OVER VERANDAH FROM OFFRS MESS ENTRANCE TILL GUEST ROOM NO 16 AT DGNCC UNDER GE (EAST) DELHI CANTT

Amount

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Dismantling of PVC water tanks n exc 500 litres capacity of any condition or type complete all as specified and directed.

Dismantling of PVC pipe 100 mm bore complete all as specified and directed.

Dismantling of PVC pipe 75 mm bore complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed.

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed.

Taking down plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete, brick work, masonry, etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed

Dismantling timber scantlings 40sqcm and over in section, in any position complete all as specified and directed

Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed.

All as per item No. 12 here-in-before but 20 mm bore

Taking down chowkhat or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (1-0.2mm). Door profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitred cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 to 0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and S.S wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and as directed. (Note:The unit rate quoted by contractor includes cost of glass, hydraulic door closure, lock and includes all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partitions /sides/ top/ bottom/back sides etc for cabinet/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of drawers etc. complete all as specified and as directed. (Make :Rajshree or equivalent)

S & F in repairs stainless steel Curtain Rod 25 mm dia with holders fixed to wall with finials and bracket etc complete all as specified and as directed. (Note : Damage to Brick/stone or any type of wall and existing cement plaster/pointing during fixing of curtain rod/bracket/finial shall be make good and bring back to old position to be done by the contractor and the cost for the same shall be deemed included in the unit quoted rate, No extra payment will be made for brick work, re-plastering and painting to the contractor.)

S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F150mm long Brass handles, cast type, polished bright complete all as specified and as directed.

S&F brass 4 lever locks, drawer, grade I, size 75mm complete all as specified and directed.

S&F 125mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 28 here-in-before but 6-8mm dia as in stirrups.

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

M&L rendering 15 mm thick in CM 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and fair complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on fair face of brick work/ concrete surfaces with water proofing compound finished even and fair complete all as specified and directed. (Note :- WPC shall be measured and paid in relevant item of this Sch /BOQ as Supply only)

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D-2,(1:4:8) (40mm graded aggregate) as in sub base complete all as specified and directed

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for Vitrified coloured tiles any shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No 37 here-in-before but as in skirting over 10mm thick rendering in CM (1:4) complete

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

All as per item No 40 here-in-before but 20 mm bore.

S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connection to drain pipe with all fitting and fixture complete all as specified and as directed. Make :- Jaquar cat No SLS-WHT-6851S300PP or equivalent in MARC/Kohler

S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination complete all as specified and directed :- (a) Wash Hand Basin 810mm x 500mm with CP grating and CP bottle trap. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63

S&F in repair 15 mm bore brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed complete all as specified and directed. (Make Jaquar Florentine FLR-CHR 5273UPR or euivalent in MARC/Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F Hat and coat hooks, set of six, solid body of brass, 175mm to 250 mm complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union complete all as specified and directed. (make: Jaquar cat no CON-CHR-053 KN or equivalent in Marc/Kohler ) .

S&F in repair, wall mixer with provision of over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. (Make Jaquar Florentine FLR-CHR-5273 UPR or equivalent in Marc/Kohler)

S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed (make: Jaquar cat No CON-CHR-047 KN or equivalent in Marc/Kohler )

S&F in repair Stainless steel grating 125mm dia with centre hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.

S&F Hubless CI pipes of 100 mm bore ( single socketed in any length with rubber ring joints and clamps including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed.

All as per item No. 56 here-in-before but 75mm bore.

S&F Hubless CI 100mm bore (single T) or unequal provided with access door complete all as specified and directed.

S&F 100 mm bore CI hubless bends/shoes any radius complete all as specified and directed

All as per item No. 59 here-in-before but 75 mm bore.

S&F in repair UPVC (SWR) 110 mm Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa in roof covering/cladding to wall, fixed with self tapping screws and the sheet should be embedded in to the wall to a depth of 25mm and the surfaces to be plastered and made good complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Framed bracket of angles or tees with web and flanges, MS plate etc, cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L Cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in coping, complete all as specified and directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

M & L for preparation of new plastered surfaces of internal wall/ceiling and applying 2 coats of Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over and including 2mm thick wall care putty and coat of primer complete all as specified and as directed.

M & L for preparation of new plastered surfaces of internal wall and applying 1 coat of texture paint with one coat Internal acrylic paint of Dr. Fixit Sureseal or equivalent of Asian Paints or Berger over & including 2mm wall care putty and coat of primer complete all as specified and as directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including 2mm thick wall care putty complete all as specified and as directed.

S&F glass corner shelf fancy type made sheet glass fixed with chromium plated brackets complete all as specified and directed. Make : Jaquar ACN-CHR-1173 or equivalent in MARC/Kohler

S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated(CP) brass screws complete all as specified and directed Make : Jaquar / MARC/Kohler

S & F plain gypsum board panel 12 mm thick on false ceiling ( including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , 2mm dia wire hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of existing old board (fibre pulp. Insulation etc.)or insulation boards/slabs/blanks any thickness including cover fillets in wall / ceiling etc. including two coat of OBD over a coat of putty, complete all as specified and directed.

S & F 150 mm size designer door handle stainless steel chromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc. complete all as specified and as directed.

S&F mortice latch of size 75 mm, 4 levers of mild steel etc. complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

S&F for Ist class soft wood moulding of cross sectional area exc 13 sqcm but not exc 25 sqcm fixed with screw as in cornices, picture rails and the like complete all as specified and directed

S & F in repairs Soap Dish of chromium plated all as specified and directed (MAKE : JAQUAR/MARC/KOHLER).

S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated complete all as specified and directed. (Make: Jaquar/Marc/Kohler)

S&F shower panel 1600x200mm stainless steel complete all as specified & directed. Make :- Jaquar Cat No SHP-SSF-ST88158B or equivalent in MARC/Kohler

S & F in repair health faucet for fixing to 15mm dia GI pipe with 1.00 mtr long pipe complete all as specified and directed . Make :- Kohler / jaguar /Marc

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment as in floors over and including cement mortar 15mm screed bed in CM 1:4 complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified and directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm bore pipe complete all as specified and directed

Demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debries from site and deposited where directed at a distance n exc 1 Km from site complete all as specified and directed

M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L 75mm thick plain cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed

M&L PCC (1:2:4) ty B1 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in soft/ loose soil complete all as specified and directed

M&L for PCC (1:3:6:) Type C2 using 40mm thick graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M & L for Stainless Steel work of Grade-304 as in vertical post/pole,trusses of any type and size including special shaped washers, channels, plates (horizontal/ vertical/cantilever type work) also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).

S&F 2mm thick colour coated reinforced polycarbonate roofing sheet translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gate etc complete all as specified and directed

Dismantling structural steel work any type and any position including doors, gates but including framed truss etc complete all as specified and directed

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

M&L point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed. (a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

(d) All as per Srl Item No 102 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed. Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S& F in replacement Modular Step Fan regulator, 120 watts single / double module, fixed in repairs, complete all as specifed and as directed.

S & F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, Aluminium extruded heat sink with shatter proof opal shell of Aluminium housing. 10 Watts, cool/warm white as per site requirement, complete all as specified and as directed.

Taking down ceiling fan any size sealing cable end, dismentling blades and depositing in MES store yard. complete all as specified and as directed.

S & F ceiling fan(BLDC) 1200 mm sweep, 5 star rating regulator operated, service value not less than 6.0, 240 volts, 240 Volts. 50 Hz complete all as specified and directed .

M&L Sub main wiring with 2 run of 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, PVC concealed conduit 25 mm dia with all fittings and including 6.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 and making good disturbed surface to match with the exisitng surface, connected with thimble from main DB to sub main DB complete all as directed.

M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, PVC concealed conduit 25 mm dia with all fittings and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 and making good disturbed surface to match with the exisitng surface, connected with thimble from main DB to sub main DB complete all as directed.

S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard complete all as specified and directed

S & F of rigid non metallic PVC conduit 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hook etc. complete including cutting chasis in wall and making good the surface complete all as specified and as directed.

S&F in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement MCCB 3 Pole, 100 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

S & F of MCB DB confirming to IP 43 - IK 09 with double door , SPN 12 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F in replacement MCB SPN B Curve type, 10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed.

S&F in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

S&F Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed. Make- Euroforce Prime or equivalent.

Taking down water heater (Geyser) 25 ltre capacity, and depositing to MES store yard.complete all as specified and as directed.

S&F electric water heater of capacity 25 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc complete all as specified and directed

S&F Steel fastner of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

S&F of steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for hot and cold water from geyser and to withstand 8 bar pressure of water complete all as specified and as directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

M&L earthing with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground( earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers of galvanised steel earth strip protected by and including 20 mm bore “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part –I including testing on completion complete all as specified and directed.

S&F in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed. Make-Eveready,Havells,Crompton or equivalent.

S&F in replacment round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make-Eveready,Havells,Crompton or equivalent.

S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Make-Eveready,Havells,Crompton or equivalent.

Akhil Enterprises (BID ID -3376013)

garnet engineers contractors (BID ID -3376031)

M/s Shubh Enterprises (BID ID -3383275)

M/S Rohit Enterprises (BID ID -3376365)