Replacement of Fire Fighting M.S. Pipe Lines.

Amount

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia ( As per IS: 1239)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : a) 100 mm dia. ( As per IS: 1239)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : b) 150 mm dia. ( As per IS: 1239)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel

Dismantaling of existing butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes including refixing the same butterfly valve etc required : 80mm dia

Making trench less under ground hole across the roads/cement concrete pathway at a depth of about upto 2 mtr. by means of manual augor and connecting pipes to suit the M.S. pipe of size up to 200 mm dia. i/c making excavation on both side of road/pathway for making trenchless hole and refilling the same with excavated soil after laying pipe through trenchless hole. watering. dressing complete as required as per instruction of Engineer-incharge. (Cost of laying of pipe is not included in this item)

Providing protection to underground M.S. pipe and accessories by wrapping bitumen faced hesian tape including proper overlaps on joints testing, commissioning complete as required.For 150mm& 100mmdia.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5 m

Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level. 1:1½:3 (1 cement:1½coarse sand (zone-III):3 graded stone aggregate 20mm nominal size)

Steel work welded in built up section /framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating ,frames, guard bar, ladder, railings, railings, brackets, gates and similar works.

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion.

M/s Royale Meridian India Pvt Ltd

OPEROSE ASSOCIATES