Retrofitting of water supply scheme by way of providing laying and fitting of pipes construction of 0.45 lacs gallons capacity RCC Sump and pump operator Quarter including installation of 286 Nos FHTCs with Electro/Mechanical Components for Lift WS

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5 mtr in width ) and for shafts wells cesspits and like not exceeding 10.0 sqm on plan, including dressing of side and ramming of bottoms lift upto 1.5m,including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil.

Earth work in excavation by mechanical Means over areas (exceeding 30cm and up to 1.5 mtr in depth 1.5 mtr in width as well as 10 sqm on plan)including disposal of excavated earth upto 1 mtr from cutting edge disposed earth to be leveled and neatly dressed in all kind of soil.

Extra for every additional lift of 1.5 mtr or part thereof in all kind of soil

Providing and laying of G.I. pipes complete with cost of G.I. Pipes/fitting/all types of pipes specials as per site requirement including handling of all types of carriage to the site of work ,interconnection at tapping point and delivery point with the existing system of excluding the cost of earthwork and refilling etc.

50mm dia GI pipes

40mm dia GI pipes

25mm dia GI pipes

20mm dia. Gi piupes

Providing and Laying S&S centrifugally cast ( spun) Ductile Iron Pipes Confirming to IS : 8329:-

150 mm dia Ductile Iron Class K- 7 pipes

Providing push on joint to centrifugally (spun) Cast Iron Pipes or Ductile iron pipes Including testing of Joints.

Making connection of G.I. distribution branch with G.I. main of following size by providing and fixing Tee, including cutting and threading the pipes etc. complete.

20-40 mm nominal bore

Providing/laying stone soling hand packed including cost of stone.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 mix: (1: Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size.)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering and shuttering finishing and reinforcement . All work upto plinth level in 1:1.5:3 mix: (1: Cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size.)

Reinforced cement concrete work in walls ( any thickness) including attached pilasters, buttresses plinth and string courses, fillets, columns , pillars piers, abutments, posts and struts etc, upto floor five level excluding cost of centering shuttering, finishing and reinforcement in 1: 1.5: 3 mix( 1: cement 1.5 coarse send 3 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs, having stop upto 150 landing balconies shelves, chajjas, lintels, bands plain windows sills staircases and spiral stairs cases upto floor five level excluding the cost of centering, shuttering finishing and reinforcement with 1:1.5:3 mix (1 cent: 1.5 Coarse sand:3 Graded stone aggregates 20mm nominal size.)

Dry random rubble masonry with hard stone in foundation and plinth .(using quarry stone with bound stone)

Brick work with common brunt cly F.P.S.(non modular)brick of class designation 7.5 in superstructure above plinth level upto floor five level in all shape and size in cement mortar 1:6(1: cememt :4 fine sand)

Reinforcement for R.C.C Work including straightening, cutting, bending, placing in position and binding all complete.(thermo –mechanically treated war )

Extra for providing water proofing compound to cement concrete work.

Structure steel work welding in built up sections trusses and framed work including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete.

Structure steel work welding in built up sections / framed work including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete.in gratings, frames, guard bars, ladder, railings,brackets, gates and similars works.

Centering and shuttering including strutting ,proping etc. and removal of form work for:

Foundation, footing , bases of columns etc, for mass concrete.

Wall (any thickness) including attached pilaster, buttressed plinth and string courses etc.

Lintel Beams plinth beams griders etc

Suspended Floor, roofs, landing, Balconies and cantilevers

Edges of slabs and breaks in floors and walls under 20cm wide

12mm cement plaster in1:4 nominal mix

12mm cement plaster Finished with a floating coat of neat cement in 1:3 nominal mix

Providing corrugated G.S sheet roofing vertical /curved surface fixed with polymer coated J & L hook ,bolts and nuts 8mm diameter with bitumen and GI limpet washer or with GI limped washer filled with white lead and including a coat of approved primer and two coat of approved paint on overlapping of sheets complete (up to a pitch 60 degree )excluding the cost of purlin rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275gm /sqm

Providing and fixing of M.S. rolling shutters of size (2.1x2.9) including painting with enamel paint two or more coats including priming coat with locking arrangement complete job.

Providing and fixing Coloured plain G.I sheet soffit ceiling and eves boarding including cutting to size and shape where ever required 0.50 mm and including frame work as per specification including all lead and lifts complete job

Providing wood work in frames of doors, windows clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately).2nd class kail wood.

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clearstory windows including ISI marked black enameled MS butt hinges with necessary screws excluding, paneling which will be paid separately. Second class kail wood 35mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clearstory windows( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) panelling for panelled or panelled and glezed shutters 25mm to 40mm thick:-

Second class kail wood

4mm thick glass pane(weighing not less than 10kg/sqm)

Providing and fixing 35mm thick wire gauge shutter stainless steel graded 304 wire gauge with wire of dia 0.5mm and Avg,width of aperture 104mm both directions for door windows and clerestory windows with necessary screws . Second class kail wood .

providing and fixing of 1st quality ceramic glazed tiles confirming to I.S. : 15622 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA etc. in all colours shade except begundy,bottle green, black of any size as approved by Engineer- In- Charge in skirting risers of steps and dados,lain on 12mm thick bed of cement mortar (1:3) and with grey cement slury@ 3.3 kg per sqm including pointing the joint with white cement mixed with pigment of matching shade complete.

Providing and applying Pop / wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and saft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.Two or more coats on new work. Over and under coat of suitable shade with ordinary paint of approved brand and manufacture.

Filling available excavated earth (excluding rock) in trenches; plinth, sides of foundation etc. layers not exceeding in 20cm in depth, consolidating each deposited layer by ramming and watering and lead upto 50mtr and lift upto 1.5 mtr.

Provision for misllaneous items likes sliding door bolts, tower bolts, handles etc. of superior quality.

Provision for saintary fittings and water supply installations viz. bib cocks,towel rod, G.I. pipes fittings, PVC disposal pipes including manholes, mirror, cistern, commode, 50 ltr cacacity geyser, Sink, 1000 ltr capacity triple layer water storage tank etc complete job as per the direction of Engineer in charge

Provision for providing and fixing PVC conduits of standard make of electric fitting including electric fitting using wire and other electric installations of standard make including MCB's and main control board and service wire complete job (lighting points=06 Nos, heating points=04 Nos

Provision for maintenance of Scheme for two years after trail run and performance evaluation for at least one season.

Carriage of material from sourse to dumping site by mechanical transport including loading, unloading and stacking complete:-

Cement and steel avg. lead 10 Km

Sand avg.lead 35Km

Stone agg. Avg. lead 15 Km

Stone Solling Avg.lead 10 Km

Bricks avg. lead 20 km

Electro/Mechanical Components:

Supply, installation, testing and commissioning of Submersible pumping units as per specifications mentioned in NIT/SBD

P/F of 16 sq. mm, submersible cable Havel’s/ L & T make for submersible pumping equipment from panel to motor.

Fabrication / Providing / Fitting and testing of Modular control panel of appropriate size fabricated out of 16 SWG steel sheet having required openings / vents and fitted with accessories as per specifications mentioned in NIT/SBD

Fabrication / Providing / Fitting and testing of Change Over panel of appropriate size fabricated out of 16 SWG steel sheet having required openings / vents and fitted with accessories as per specifications mentioned in NIT/SBD

P/I/T/Comm. of 75 KVA voltage stabilizer as per specifications mentioned in NIT/SBD

P/F of 7/16 PVC insulated copper wire of Havell’s / Finolex make for inter connections of electric gadgets.

P/F of copper/ aluminum thimbles of various sizes as per size requirement including crimping and taping.

Providing, fitting, testing and commissioning of XLPE Armoured Al. Cable of 1.1 KV grade conforming to IS: 7089 part 1st with following characteristics: Conductor Nominal area : 70 mm2 Min. Number of wires 3 ½ Make : Havel’s/ /L&T

Providing and Fitting of 70 mm dia. flexible canvas sleeve for carrying conductor.

Providing/laying of 3mm thick high density anti skid rubber floor mating on the machine floor level area

Supply and erection of 9 mtr long hot dip galvanized octagonal pole ( Single Section ) with bottom 155 mm, top 65mm, thickness 3 mm with Zinc coating with inside arrangement for providing of power connection with following items: 04 No foundation bolts of required size and length with nuts Cement concreting of required size but not less than (50 x 50 x 100) cm in 1 : 2 : 4 ratio required length 1.5 sq mm multi strand PVC insulated copper conductor Mounting arrangement for fixing flood lights Service line from panel to pole in 2.5 sq mm multi strand PVC insulated copper conductor to be laid underground through sleeve – Length as per site requirement

Supply, Installation, Testing and commissioning of pressure die cast aluminium integral LED flood lights IP66 as per specifications below : Make : Havell’s Rating – 90 W Model : LHETAXU7IN6J090

Providing, Fabrication and fitting of suitable fixture capable of supporting/fixing 03 no. lights. It must be suitable for pole mounting and fabricated out of suitable size pipe.

Supply, Installation, Testing and Commissioning of Modular panel for outdoor duty of appropriate size fabricated out of 14 SWG sheet having required side louvers / vents for efficient heat dissipation having proper locking arrangement with following : • 01 KW sine wave voltage stabilizer single phase 80 – 290 V input for a constant output of 240 V • DP, MCB Legrand / reputed make required size enclosed in steel enclosure incl. cost of lugs cable gland etc. • 32 Amp double pole MCB Legrand / L & T make • 10 Amp MCB – 04 No’s L&T / Havell’s make The panel is to be supported on suitable size MS pipe, grouted properly and provided with a CC block of suitable dimensions

Supply and installation of 1050 VA Microtek/ Luminous / Exide made inverter for charging battery of DG set installed at water supply scheme. The job also includes supply of 12 V - 150 Ah Exide Xprss battery complete with leads, terminals and thimbles. The job includes all the charges on account of carriages, wiring and arrangement of skilled labour for installation of inverter. The job includes demonstration of the use of inverter and testing at site.

Electrification of Pump House by way of P/F of :- Lighting points in 1.0 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. The job incl. P/F of 5 Amp. switch, angle / button holder, 5 W LED lamp with necessary fixtures. – 06 jobs Heating points in 2.5 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. The job incl. P/F of 16 Amp.SS combine - 04 jobs 5-pin socket points in 1.5 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit.- 04 jobs Indicator points in 1.0 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit – 04 jobs Ceiling Fan make c/w regulator switch, wiring in 1.5 sq mm multi strand PVC insulated copper conductor to be laid / carried in PVC channel/conduit. and necessary fixtures. – 02 jobs Distribution Board SP & N ( Regal Grey ) with 01 No incoming and 8 way outgoing, fitted with mini MCB “C” series 6A - 04 No for lighting points and 2/3 pin socket points and fans, 10 A – 01 No for flood lights, 16 Amp – 01 No for heating points, 36 Amp MCB ( Mains ) – Havell,s make. The fittings shall be modular type and of Havell’s / GM make

Providing, Installation of earthing station comprising of company fabricated earthing electrodes as per IS: 3043. The job includes Auguring of bore of required dia / depth for installation of electrode along with black fill compound mixed with soil and all other items required thereof for achieving the best result The job includes P/F of GI strip shall be fitted on baby insulators and clamps. Safe earthing electrode size 80 mm dia length - 2000mm Blackfill - 30 Kg Model / make - JMV-392, Ashlok, Recons Earthing electrode is needed for earthing of Electrical gadgets like Voltage stabilizer, LT Control panel etc

Providing, Laying and fitting of flanged GI rising main which is to be laid underground as per following specifications Nominal Dia : 100 mm Class of Pipe : B Pipe Ends : Flanged Flange Standard : Table – 5 Make : Prakash Surya / Jindal Average Trench size : 60 cm x 60 cm The job also includes loading, unloading of the material, fabrication work, welding of flanges, P/F of 5/8” x 3” bolts with nuts and rubber washers etc. The job involves average steep head load of 200 Mtrs approximate from nearest unloading site and job involves mostly manual excavation. The job also includes road cut for 12 feet wide non mettle GSB road .

Providing and fitting of flanged G.I column pipes as per following specifications Nominal Dia : 80 mm or as per pump outlet Length of each pipe: 10 rft Class of Pipe : B Pipe Ends : Flanged Flange Standard : Table – 5 Make : Prakash Surya / Jindal Th job includes fabrication work, welding of flanges, P/F of 5/8” x 3” bolts with nuts and rubber washers etc.

Providing, Fitting, Testing and Commissioning of Non Return Valve as per following specifications : Nominal Dia : 100mm Make : VAG/AVK/SIGMA FLOW/TALLIS Type : RETO – STOP Rating : PN 16 Body : Ductile iron Corrosion protection – Epoxy Coating

Providing, Fitting, Testing and Commissioning of Sluice Valve as per following specifications Nominal Dia : 100 mm Make : VAG/AVK/SIGMA FLOW/TALLIS Type : EKO PLUS Rating : PN 16 Body : Ductile iron Corrosion protection – Epoxy Coating

Providing, fitting, testing and commissioning of Air Release valve.  Dia. of Valve : = 50 mm  Type of Valve:-Single Chamber, Double Orifice triple action Air release valve:  Body = Ductile Iron  Float = Stainless steel AISI 316  Shell body = Stainless steel AISI 321  Gasket & seal = EPDM rubber (Gr.W 270)  Screws = stainless steel AISI 304  Pressure rating =16 kg/cm²  Make : = AVK/Ehrod/VAG/TALLIS/SIGMA FLOW  Coating : Inside and outside Epoxy powder coated,250 microns , shade RAL5005( Blue)  Material grade of valves shall be GGG-40 or equivalent as per Indian standard for above pressure rating. The valves are to be fitted to rising main .

Providing and fitting of 900 100 mm dia G.I. long radius bends made out of ( Class – B ) GI pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joint.

Providing and fitting of 100 mm dia. off-sets made out of ( Class – B ) G.I pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joint.

Fab. / P / Fitting of ( 100 x 100 x 100 ) mm TEE fabricated out of ( Class – B ) GI pipe and welded with 18 mm thick MS flange as per Table – 5 in two runs of welding . The job also includes cost on account of suitable size nuts, bolts and rubber packing in the flanged joints.

Fabrication / Erection of channel iron column to act as support for monorail crane as per following specifications :- a) Vertical posts ISMC – 150 = 4.5 m x 2 x 2 = 18 m @ 16.4 Kg / m= 295.2 kg b) ISMC – 75 = 0.35 m x 20 x 2 = 14 m @ 6.9 kg / m =96.6 kg c) Plate -12 mm thick = 0. 5 x 0.3 x 8 = 0.9 m2 = 112.8 kg d) Monorail ISMB – 200 = 5 m @ 25.4 kg / m = 127 kg e) Nuts and Bolts assorted incl foundation bolts 6/8 “ x 2’ each = 10 kg Total wt. for one gantry = 642 kgs

Providing and laying of concrete blocks in 1:2:4 ( cement : sand : aggregate ) for grouting foundation bolts / matching / base plates. Each block shall be of ( 0.75 x 0.75 x 0.75 ) m size. The job includes all the charges on account of trench cutting, arrangement of material, skilled labour, form work, shuttering etc.

Supply, installation and testing of 03 ton capacity, manually operated chain pulley block of Indef make. The chain pulley block shall have 6 m lift. It shall also include suspension arrangement made of 10 mm steel wire rope or GI wire capable of supporting rated load.

Supply, installation, testing and commissioning of Submersible pumping equipment suitable with specifications mentioned in the NIT/SBD

The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of Taparia / Everest make and to be provided in convass bag of suitable size Flat Spanner of Size (4/5 to 30/32) (01 complete set) Ring Spanner Set of Size (12/13 to 30/32) (01 complete set) Cutting Pliers, 9 inch : (01 No) Nose Pliers 9 inch : (01 No`s) Screw Driver 12 inch / 9 Inch / 6 Inch/4 inch :( 01 No`s Each Size) Hammer, I Kg: (01 No each) Pipe Wrench 12 inch : (01 No )

Supply of facilities to the operational staff comprising of: Matting comprising of 12 mm thermo cool, jute matting/ excel, floor blankets – 150 sft each Bedding comprising of mattress, razai, excel blanket, pillow – 02 sets Cooking and bathroom items as 4 ltr pressure cooker, 2.8 ltr rice cooker, pan, aluminum cooking vessels – 02 No, steel plates – 04 No, Steel glass ( tumblers) – 04 No, cooking spoons – 02 No, Cups – 04 no, Plastic Jug, Electric heater, 20 ltr plastic buckets – 02 No, 1 ltr plastic mugs – 02 No, Chargeable lantern Andslite make – 01 No, Two Burner Gas stove with domestic gas cylinder – 14 kg capacity complete with gas pipe and regulator. Heat convector / Heating Blower – 02 No Plastic chairs of Samrudhi make (04 nos) and plastic table 01 No.

Providing. Fabrication and fitting of MS holding clamps 02 feet long and fabricated out of 12 mm thick MS plate with flanges drilled with 6/8’’ dia holes as per site requirement.

P/I/T/Commissioning of 63 KVA 3 phase and neutral distribution transformer as per specifications and details mentioned in NIT/SBD

Supply, installation, erection of MS tubular poles of 9 mtrs long (SP- 33) having reduced dia. of 4”x5” x 6” from top to bottom and shall be anti-corrosive painted. The job includes providing / laying of cement concrete in 1:2:4 cement, sand aggregate block for grouting of each pole. The pole shall be fitted / welded with 40 x 40 squares in size and 10 mm thick MS plate at the bottom and having duly drilled holes at top at appropriate position for accommodating MS fasteners for holding crosses and safety devices. Job includes, earthing and the cost of black painting of poles up to a height to 1.50 mtrs and the top with a silver shade

P/F of 9’ long ISMC 100 channels for transformer bed

P/F of 9’ long ISMC 75 channels for fitment of link set, D/O set & lightening arrestor set etc

P/F 3-phase heavy duty G .O set suitable for 11 KVA at tapping point so as to ensure safety during maintenance of the HT line. The job includes costs on a/c labour, handling, carriage, channel iron required for fitting ,nuts and bolts etc.

P/F 11KVA -3 phase drop out set

P/F of lightening arrestor set station type.

P/F of lightening arrestor set station type.

P/F of the arrangement (Belt) to hold the transformer firmly and securely to the substation. It is to be fabricated out of ISA(40x40x5)mm C/w nuts & bolts

P/F of Cross arms fabricated out of ISMC 75 of 5 ft length to carry insulators duly drilled with suitable size holes for accommodating nuts bolts.

P/F of ISA 40—5 ft long as braces for above crosses duly drilled with suitable size holes for accommodating nuts bolts for proper fitment.

P/F 11KVA pin insulators ( polymer) with pins to be fitted on poles

P/F of danger plate with clamps with writing in English / regional language.

P/F of anti climbing devices complete with nuts and bolts

P/F of 0.05 ACSR Aluminum conductor

P/F of G.I wires SWG 8.

Providing, Installation of earthing station comprising of company fabricated earthing electrodes as per IS: 3043. The job includes Auguring of bore of required dia. / depth for installation of electrode along with black fill compound mixed with soil and all other items required thereof for achieving the best result The job includes connecting of electric gadgets, DG set through GI stripe making of surface structure in brick / cement concrete material as per drawing annexure. Safe earthing electrode size 80 mm dia. length - 2000mm Blackfill - 30 Kg Model / make - JMV-392, Ashlok, Recons

P/F of PRODIGY LT meter of following specifications for above Sub station c/w all fixtures required for fitment at site. Type: E3L100, 3Ph, 4Wire (KWh , kVArh, kVAh, kVA) 3x240(415)V, 50HZ Ref Temp: 270C 400 pulses/unit Ib:40A Imax 200A Battery : Lithium

P/F of Switchgear unit consisting of 200 Amp. 4 – pole MCCB 3,phase,415 V, 50 KA breaking capacity make L&T housed properly in an outdoor type cubical Panel fabricated out of MS SWG-16 sheet steel

Providing, Installation, Fitting, Testing and Commissioning of 45KVA Air Cooled D.G Set as per Technical Specifications mentioned in NIT/SBD

Fabrication, Providing, Erection of CGI sheeted angle iron canopy for DG set as per details as(from S No 53 to 60) : BLOCK WITH RAMP Earth work excavation in all sorts of soil incl. all leads lifts and disposal of excavated material 13’ x 12’ x 1’-6’’ Ramp : 4’ x 6’ x 1’ 258cft = 7.3 cum

P/Laying of stone soling dry hand packed 13’ x 12’ x 1’ Ramp : 4’ x 6’ x 6’’ 168cft = 4.8 cum

Form work incl. centering, shuttering and propping for ordinary timber planks so as to give rough finish. The job incl. removing of the same after completion. 2 x ( 13’ + 12’ ) x 2’ Ramp : 2’ x 6’ x 2’= 112 sft = 9.3 sqm

P/Laying of mass concrete with 40% boulders in 1:2:4 cement concrete mix for walls and ramp. ( 13’ x 12’ ) x 2’ Ramp : (2’ x 4’). x 6’

P/Laying/Applying of 15 mm thick plaster in 1:4 ( cement : sand ) mix over the whole expose surface 13’ x 12’ + 2 x ( 13’ + 12’ ) x 1’-6’’ Ramp: 2 x 2 x 6’’ + 4’ x 6’

PROTECTION FENCING P/Fabrication and hoisting of A) Posts: 125 mm dia 5 mm thick 10 feet long MS pipe - 06 No 300 x 300 mm x 10 mm thick MS base plate- 06 No 300 x 300 mm x 10 mm thick MS matching plates to be grouted in cement concrete block with 15 mm dia bolts projecting out of concrete and welded to the grouted plate on the other side cw suitable size nuts and washers – 06 No 150 x 150 mm x 6 mm thick MS plates to be welded on top of posts and their matching plates to be welded on the beams, - 12 No = 372.4 kgs B) ISA (50x50x6) mm single section for tie beams 2 x (12 + 13) rft = 50 rft Truss : ISA (50x50x6) mm double section for truss beam and rafter [ 3 x ( 15 + 5’-6’’ + 2 x ( 9’-6’’ ) ]x2 = 237 rft ISA (50x50x6) mm single section for truss 3 x 2 x ( 6’ + 4’ + 4’ ) = 84 rft Cleats : 3 x 8 x 4’’ = 8 rft Total : 379 rft = 115.6 rmt @4.5 kg / rmt = 520.2 kg ISA(40x40x5)mm for Purlins 8 x 16’ = 128 rft = 39 rmt @ 3 kg / rmt = 117 kg Plate : 36 x 7’’ x 8’’ x 6 mm = 59 kg

P/Fixing of 0.5 mm thick (26 SWG) corrugated CGI colour coated sheets for roofing of the shed. The job incl. P/F of L/J hooks with nuts and washers. 2 x 16’ x 10’ = 320 sft Ridge 18’ x 2’ = 36 sft

Painting of Gantry, shed incl. all the metal surfaces except CGI sheeting by applying a coat of anticorrosive (Red Oxide) and then two coats of synthetic enamel paint.

M/S BHAT CONSTRUCTIONS

M/S SABEEL AHMAD MAGRAY