CERTAIN REPAIRS TO BUILDING (DAY TO DAY) MAINTENANCE AT NAD, VAJRAKOSH, NK BAIL AND NCHC AMDALLI AND REPAIR / MAINTENANCE OF STATION SWIMMING POOL AND DIVING POOL AT ARGA AT NAVAL BASE KARWAR UNDER GE(SB) KARWAR

Amount

Taking down wooden shutters of any description n exc 1 sqm each and refixing in the same opening after easing and adjusting and refixing builders hardware as required incl renewal of unserviceable screws etc all as directed. (Renewal of any item will be measured and paid seperatly in respective item)

All as per item No 1 here in before but exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

Repairs to wooden shutters by resecuring or easing and adjusting without taking down of shutters of any description not exc 1 sqm each complete all as directed.

All as per item No 3 here-in-before but exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

Taking down aluminum window shutter not exceeding 1 sqm and refixing the same after replacing damaged/perished/rusted glass/gauge/wire mesh etc complete. (Note-glasss/gauge/wire mesh will be measured & paid separetely .

Taking down aluminum sliding window shutter not exceeding 1 sqm from track /tube by removing frame /track and refixing the same after replacing damaged/perished/rusted glass/gauge/wire mesh etc complete. (Note-glasss/gauge/wire mesh will be measured & paid separetely .

Taking down aluminium door shutter of size exceeding 1.5 Sqm and not exceeding 4 Sqm each leaf, opening floor spring assembly over hauling, refixing floor spring (with new screws) and door shutter in position all as directed.

Taking down wooden/PVC/FRP/Aluminium chowkats or frames and not exceeding .1.5 Sqm each with shutters(without taking of shutters from the frame)

All as per item No 8 here in before but exceeding 1.50 Sqm and not.exceeding 4.00 Sqm each complete all as specified and directed.

Material and Labour for plain solid straight chowkats and frames 2nd class hard wood, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Material and Labour for II class hardwood 35mm thick ,framed panelled door shutters (any no of panels)with panels of timber flat on both sides or of veneered particle board medium density wood particle board with commercial face veneers supplied and fitted to chowkats etc complete all as specified and directed.

Material and Labour for flush shutters 40mm thick with ,solid core construction with particle board core and plywood face panels and both sided laminated with decorative face veneers with lipping/frame to match complete all as specified and directed.

Material and Labour for mild steel flat iron holdfast for securing new wooden frame and similar articles conforming to FE 290 Gde-E-165 all as specified and directed

Material and Labour for cement concrete block 1;2:4 type B1 using 20mm graded stone aggregate in holdfast block including necessary formwork etc complete all as specified and directed.

Material and Labour for solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification and drawings.

Supply and Fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc. Details as peer specification and drawings.

Supply and Fix in repairs for aluminium anodized frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including taking down old frames complete all as specified and directed.

Supply and Fix in repairs for aluminium powder coated (minimum thickness of powder coated 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

Supply and Fix in repairs aluminium powder coated (minimum thickness of powder coated 50 micron) window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc compelte all as specified and directed.

Supply and Fix Mild steel butt hinges medium weight; 100mm size complete all as specified and directed.

Supply and Fix 150mm aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply and Fix extruded aluminum alloy handle fabricated type anodized 150mm complete all as specified and directed.

Supply and Fix in repairs butt hinges 100mm size, medium weight, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21 complete all as specified and directed.

Supply and Fix in repairs butt hinges 125mm size, medium weight, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21 all as specified and directed.

Supply and Fix in repairs Aluminum alloy, powder coated, sliding door bolt 300 mm long and not less than 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

Fixing only in repairs sliding door bolts 150 mm long size with new screws(or bolts, nuts and washers) all as specified and directed.

Supply and Fix in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long all as specifed and directed.

Supply and Fix in repairs Aluminium anodised barrel tower bolts of extruded section 150mm long all as specified and directed.

Supply and Fix in repairs extruded aluminum anodised handles, fabricated type 150mm size all as directed.

Supply and Fix in repairs Aluminium anodised tubular towel rail 19/20mm dia all as specified and directed.

Supply and Fix in repairs, brackets aluminium anodised, suitable for item No.30 herein before complete all as specified and directed.

Supply and Fix in repairs Aluminium anodised curtain rod/hanger rod 19/20mm dia all as directed.

Fixing only in repair aluminium anodised curtain rod/hanger rod 19/20mm dia all as directed.

Supply and Fix in repairs Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm all as specified and directed.

Supply and Fix Aluminium body, door closer, hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

Supply and Fix in repairs Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.

Supply and Fix in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed. Note : The work is to be carried out above three story bldg height.

Supply and Fix in repairs PVC buffer 40mm dia not exceeding 100mm long all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames exc 1.5 sqm, glazed with putty or fixed with beads all as directed.Note: Glass will be measured and paid for separately.

Material and Labour for 4mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

Material and Labour for 4mm thick figured glass, pin head type and glazing not exc 0.5 Sqm in each pane with and including wooden beading all as specified and directed.

Material and Labour for 4.8 mm thick sheet glass, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exc 0.5 Sqm in each pane including hacking out old broken glass all as specified and directed.

Supply and Fix in repairs veneered particle board 18/19 mm thick, exterior grade, solid core, general purpose type, with face veneers of type BB, fixed with screws to timber frame work complete all as specified and directed.

Material and Labour for 2nd class hardwood scantlings timber fixed, or in chowkats, styles and rails of framed work, including dismantling wood work complete all as specified and directed.

Material and Labour for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified & directed.

Dismantling boarding, any description, fixed any position fixed with screws all as specifed and directed

Material and Labour for 18 mm thick PVC ply both sides plain as in cupboards including solvent cement, stainless steel hinges/handles, SS screws etc as per manufactures instructions complete all as specified and directed. Make of PVC ply shall be M/s Rajshree Plastiwood Ltd or equivalent in M/s Sintex industries Ltd/M/s Everst Composites Pvt Ltd as approved by GE

Supply and Fix in repairs Stainless steel channels ,50 to 60cm long suitable for moving the draws complete all as specified and directed

Taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

All as per item No. 49 herein before but 20mm bore complete all as specified and directed..

Refixing old GI tubing 15mm bore and connections in new or old position (walls, ceiling, floors etc), after cleaning from inside, removing rust, cleaning the threads, rethreading all as directed.

All as per item No 51 here-in-before but 20mm bore complete all as specified and directed.

Supply and Fix tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors.

All as per item No 53 above but 20mm bore complete all as specified and directed..

Supply and Fix in repairs stop valves, cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed.

Supply and Fix in repairs stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15mm bore all as specified and directed.

Supply and Fix in repairs angle stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15mm bore all as specified and directed.

Supply and Fix in repairs bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all as specified and directed.

Fixing only in repairs bib taps any type 15mm bore including cleaning and making tap functional all as directed.

Supply and Fix in repairs Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

Removal of Air lock from GI water pipe line of any dia by loosening socket/bib tap and refixing the same all as directed.

Supply and Fix in repairs 15mm dia, 45 cm long PVC connection with brass ferrules on both ends all as directed.

Supply and Fix in repairs plastic water closet seat and cover, black, closed pattern with flat bottom suitable for pedestral / Semi pedestral pattern water closets and mild steel chromium plated or aluminized hinging device all as directed.

Fixing only in repairs, seat and cover for pedestal pan including adjusting the cover to its original position, tightening of hinging device using new bolts etc complete all as directed.

Supply and Fix in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes complete all as specified and directed.

Fixing only in repairs high or low level flushing cistern 10 ltr capacity and connections to pipes and fixing of chain and pull or lever after cleaning the inside of all dirt, scale formation, replacement of rubber washers stopping of leakage etc complete all as directed.

Supply and Fix in repairs Polythene syphon assembly for PVC low level flushing cistern complete all as specified and directed..

Supply and Fix in repairs 125mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15mm bore GI pipe complete all as specified and directed..

Material and Labour for fixed in repair for 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as directed.

Fixing only in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and Fix in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as directed.

Supply and Fix in repairs MS Chromium Plated grating 125mm dia suitable for Nahani trap all as directed.

Supply and Fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe15mm dia( minimum weight 142 gms), suitable for flushing cistern 10 liters capacity all as directed.

Material and Labour for 25mm thick cement concrete type 'B-0' 1:2:4 using 12.5mm graded stone aggregate as in sub base flooring all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc all as directed.

Material and Labour for cement concrete 75mm thick Type C-2,1:3:6 (40mm graded aggregte) in Plinth protection

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

Material and Labour for screed bed or bedding layer 20mm thick in cement motar 1:4 to receive topping layer such as tilling etc complete all as specified and directed

Material and Labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete/brick work surfaces finished fair and even without using extra cement to receive tiles complete all as specified and directed.

Material and Labour for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 80 above but in vertical surfaces such as skirting/Dado etc complete all as specified and directed

Material and Labour for vitrified ceramic tiles dark coloured shade, double charged (Ist quality), 10 mm thick (Square/rectangular), area of each tile exc 0.36 sqm and not exc 0.42 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 82 above but in vertical surfaces such as skirting/dado complete all as specified and directed

Material and Labour for coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7mm set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed

Material and Labour for Rendering 10 mm thick on stone/concrete surfaces to be finished even and smooth (without using extra cement) in CM mortar 1:6 (internal wall surface)complete all as specified and directed.

Material and Labour for Rendering 15 mm thick on stone /concrete surfaces to be finished even and smooth (without using extra cement) in CM mortar 1:4 (External wall surface) complete all as specified and directed.

Material and Labour for preparation of new plastered surface of internal walls and applying two coats of Oil Bound Distember over a coat of primer complete all as specified and directed.

Material and Labour for preparation of newly plastered external walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and directed.

Material and Labour for removal of defective tap & extension piece from elbow/socket by cutting/cleaning the threads & replacement of bib tap and extension piece 15mm GI Pipe including making good the floor /wall by replacement of tiles by providing 300x300x7mm thick non skid coloured ceramic tiles set and jointed in near cement slurry and pointed in coloured cement to match laid over 20mm thick cement screed in CM 1:6, area n.exc 0.30 Sqm complete all as specified & directed.

Material and Labour for removal of blockage in GI pipe 25mm bore by cutting pipe and inserting GI wire or using vaccum pump or any other suitable means and refixing the pipeafter threading and providing all fittings as required, all as directed. Note : The work is to be carried out above two floors height and necessary scaffolding shall be provided by the contractor. The unit rate quoted shall be deemed to include for the same .

Supply and Fix in repairs CI brackets for WHB complete all as specified and directed.

Supply and Fix in repair wash basins vitreous china , flat back size 550x400 mm white excluding taps,waste chain and plug and porcelain stopper but including barackets complete all as specified and directed.

Supply and Fix in repair vitreous china semi pedastal pattern (Anglo Indian type ) water closet including pipe,cistern & seat cover complete all as specified and directed.

Supply and Fix in repair vitreous china wash down water closet (pedastal pattern) white, with plastic water closet seat & back with flat bottem and cover, MS chromium plated or aluminium anodised hinge device including fixing bolts and necessary connection with existing pipes etc complete all as directed.

Supply and Fix in repairs Sinks made of stainsless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply and Fix in repairs PVC handles/knob for low level flushing cistern complete all as specified and directed.

Material and Labour for 2nd class hardwood beads,straight (any size) for glazed or gauzed joinery, renewed, including mitres etc complete all as specified and directed.

Supply and Fix in repairs Aluminium beads/glazing clips for glazed or gauzed joinery, renewed, including mitres etc complete all as specified and directed.

Supply and Fix in repair CP Health faucet with spring pipe complete all as specified and directed. (Make : Jaquar, Mark, Czar Jal or equivalent)

Supply and Fix in repairs mirror mounted PVC cabinet of size 450x600mm complete all as specified and directed.

Supply and Fix in repairs brass chromium plated mixing valve suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends,swan-necks etc complete all as specified and directed..

Material and Labour for 125mm dia. PVC rain water pipes with Socket complete all as specified and directed.

All as per item No 105 above. (Serviciable pipes from item no.104 shall be used).

Supply and Fix in repairs Stack clamps out of 50mm by 5mm including bolts and nuts and securing ends of stay to wall or roof for 110mm pipe complete all as specified and directed.

Supply and Fix in repair Push cock with sprinkler flush for urinal pot completed all as specified and directed.

Supply and Fix in repair vitreous china suating pan, "Orissa pattern" size 580x440mm white with integral foot rest (excluding flushing cistern and flushing pipe) and connection with existing pipes etc complete all as directed.

Supply and Fix in repairs Chromium plated shower arms 190 mm long complete all as specified and directed.

Supply and Fix in repairs 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all as specified and directed.

Fixing in repairs stainless steel kitchen plate racks of 1 mm thick of overall size 900mmx 900 mm as per trade pattern complete all as specified and directed by Engineer-in-Charge.

Supply and Fix in repair 20 mm dia Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified.

Material and Labour for Draining out water, cleaning and removing accumulated sludge/dirt scales from tank bottom, side and from moiths of circulating pipes of service tank of capacity not exceeding 500 ltrs, located on roof of the building and disinfecting the tank using bleaching powder to make the tank bacteria free complete all as specified and directed.

Material and Labour for Draining out water, cleaning and removing accumulated sludge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity exceeding 500 ltrs but not exceeding 1000 ltrs, located on roof of the building and disinfecting the tank using bleaching powder to make the tank bacteria free complete all as specified and directed.

Material and Labour for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high stencil date of cleaning of tank with white synthetic enamel paint on black ground " CLEANED ON ( DATE)" height of the words 100mm, complete all as specified and directed.

Supply and Fix in reapir 15 mm dia gun-metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

Supply and Fix in repair 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

Fixing only in repair 20mm High Pressure float valve for pressure 0.175 Mpa and above complete all as specified and directed.

Fixing only in Repair Wash Hand Basin Including necessary fittings and fixtures complete all as specified and directed.

Fixing only in repairs mirror mounted PVC cabinet of size 450 x 600 mm complete all as specified and directed.

Fixing only in repair hydraulic door closer complete all as specified and directed..

Fixing only in repair Gate valve 25mm bore complete all as specified and directed.

Fixing only in Repair stainless steel kitchen sink

Fixing only in repair CP shower Rose

Fixing only in reapirs PVC water tank cover including necessary PVC fixing & locking device fixed with stainless screws suitable for 500 Ltrs water tanks all as specified and directed.

Fixing only in repars PVC water tank cover including necessary PVC fixing & locking device fixed with stainless screws suitable for 1000 Ltrs water tanks all as specified and directed.

Supply and Fix PVC Rotational moulded polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specifed in SSR part-I (500 ltrs capacity) incl dismantling of existing tank.complete all as specified and directed.

Supply and Fix PVC Rotational moulded polythene water storage tanks triple layered (cylindrical vertical with 1000 ltrs capacity) incl dismantling of existing tank.complete all as specified and directed.

Cleaning of Arga Swimming Pool of size 50 m x 21 m before operation using Eco friendly harmless to human beings cleaning material and suitable methods to make the pool water crystal clear bottom of the pool and transperant water all the time before filling as required at site once in a year complete all as specified and as directed by Engr-in-charge.

Cleaning of Deep Diving Pool of size 16 m x 16 m at arga before operation including complete drain out of pool with the help of required capacity Submersible monoblock Pump/set and Dry with using cotton cloth as well as complete drain out of filtertion plant once in a year and make the plant room neat & clean complete all as specified and directed by Engr-In-charge.

Cleaning the Arga swimming pool balancing tank 3 Lakh litre by pumping out water of the balancing tank with the help of sumbersible/centrifugal suction pump of capacity not less than 5 HP, cleaning the empty tank with iron brushes, bleaching powder, and taking out deposited mud/sludge and then finally flushing out the residual sludge/mud with fresh water till cleaned surface obtained complete once in a year complete all as specified and directed by Engr-in-charge.

Cleaning the sediments/dust particle deposited on the floor of the swimming pool of capacity 2000 cubic meter and diving pool 1800 cubic meter at arga, using suction sweeper fitted with nylon brushes till the clear water on the floor is obtained on alternate days complete all as specified and directed by Engr-in charge.

Cleaning the sediments/dust particle deposited on the floor of the swimming pool of capacity 2000 cubic meter and diving pool of capacity 1800 cubic meter at arga using suction sweeper fitted with nylon brushes till the clear water on the floor is obtained by dozing exta doze of chemicals on preceeding day of maintainance once in week complete all as specified and directed.Notes for item No 1.00 to 5.00: (i) Required electricity will be supplied by the department free of cost.(ii) Chemicals will be measured and paid seperately (iii) Chemical to be supplied under relevent item of this schedule shall be used in accordance to the directions issued by Engineer-in-Charge. (iv) Supply shall be made by the contractor based on the requirement / piecemeal manner as directed by the AGE E/M and shall be delivered in the store yard of AGE E/M. No claim whatsoever on account of extra charges of transportation shall be entertained by the Deptt.(v) Contractor shall provide the original purchase vouchers alongwith test certificate of entire quantity of each lot at the time of delivery.(vi) Quoted rates shall be included for providing manpower and required cleaning material, safety gears and ladders etc required at site for drain out the swimming pools de-watering on completion of Operation and Maintenance of swimming pools.

Material & Labour for attending & check any fault in 20 HP capacity electric motor, 3 phase starter, after disconnecting from electric mains, isolating the connections, check phase sequence of motor, connection in terminal block, replace burn wire if required in panel, starter and motor, check insulation resistance of motor, opening motor for greasing in bearing for smooth operation and replace any damage nuts, bolts, washer of any size as per require, other minor repair at site and re-connecting including replacement lugs of suitable size, testing and commissioning complete all as specified and directed. Note :- Replacement of winding, shaft, bearings, starter, mccb to be measured separately and No extra payment paid for Insulation tap provided by contractor as per site requirement.

M&l for Dismantling 3 phase monoblock electric motor from mains electric supply, decoupled from pumps, taking out by unscrewing the foundation nuts, bolts, in case major repair/replacement of parts not possible at site, the motor shall be shifted to workshop on his own cost, and re-assembling the motor after repair, re-fixing as per existing position, testing and commissioning complete including replacement of nuts bolts washers ass as specified and as directed by Engr-in-charge

Material and Labour for replacement of defective driving end ball bearing suitable upto 20 HP, 3 phase electric motor of any make complete all as specified and as directed.

Material and Labour for replacement of defective Non driving end ball bearing suitable upto 20 HP, 3 phase electric motor of any make complete all as specified and as directed.

Material and Labour for replacement of defective MS Shaft suitable for rotor of 20 HP, 3 phase electric motor of any make complete all as specified and as directed.

Material and Labour for replacement of defective PVC type fan blade suitable upto 20 HP, 3 phase electric motor of any make complete all as specified and as directed.

Material and Labour for replacemnt of terminal plate with connector and outer cover suitable for 20 HP capacity motor, including connecting up supply to terminal block and testing complete all as specified and as directed Engr-in-Charge.

Material and Labour for strip opening of motor cutting and removing out old burnd winding of 3 Phase, 440 volt electric induction motor capacity of 20 HP and rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, bearing, bushes etc of suitable size, including neecessary repairing of rotor shafts if required and refixing the same in original position and testing and commissioning complete all as specified and directed.

All as per item no 142 above herein before but 12.5 HP capacity motor complete all as specified and directed.

All as per item no 142 above herein before but 5 HP capacity motor complete all as specified and directed.

Material and Labour for attending complaint in pumps of any type, any make upto 20 HP capacity by unscrewing the foundation bolts, disconnecting from water connection, and disconnecting from electric motor, opening for inspection in presence of Engr-in-Charge and carry out minor repair at site like gun metal bush, gland with cover, impeller/shaft lock pin, seal other minor work and in case major repair/replacement of parts not possible at site, the pump shall be shifted to contractor's workshop on his own cost, and re-fixing, re-connecting in position, testing and commissioning complete including replacement of nuts bolts washers ass as specified and as directed by Engr-in-charge. Note :- Replacement of Shaft, impeller, coupling and bearings to be measured separately.

Material and Labour for replacement of unserviceable /defective mild steel shaft suitable upto 20 HP centrifugal /monoblock pumps of any make complete all as specified and as directed.

Material and Labour for replacement of unserviceable /defective mild steel impeller suitable upto 20 HP centrifugal pumps of any make complete all as specified and as directed.

Supply and fix in replacement of Casing assembly for 20 HP capacity pumpset (pump+motor) including removing and refixing of impeller, shaft, bearings, sleaves, seals with SS nut bolts, and re installation of Pump, metalising the shafts including welding works installed at Swimming Pool complete accessories all as specified and directed by Engr-in-charge.

Material and Labour for replacement of defective mild steel shaft coupling (male and female type with lock pin) as per existing of pump set upto 20 HP capacity centrifugal pump set complete accessories all as specified and directed by Engr-in-charge.

Material and Labour for replacement of defective ball bearing upto 20 HP capacity centrifugal pump set complete accessories all as specified and directed by Engr-in-charge. Note for item No 136 to 150 : - Unit rate of this item include the cost of transportation charges for carrying the motor/pump from site to workshop and back, nut bolts, gasket, insulation tap and any other minor items. Nothing extra shall be admissible.

Supply and use Trichloroisocyanuric Acid (TCCA 90) Compound high quality chemical powder confirming to IS with plastic drum of 50 kg packing for swimming pool complete all as specified and directed by Engr in charge. Make- Austin pool chemical or as aprroved by GE. Note:- The contractor shall submit alongwith supply of material purchase vouchers test certificate for chemical composition and its expiry date etc and other relevant documents supply of chemical shall not be accepted without production of these documents and no payment released.

Supply and use of Alum sulphate confirming to IS complete all as specified and directed by Engr-in-charge.

Supply and use of Copper sulphate confirming to IS complete all as specified and directed by Engr-in-charge.

Supply and fix in repair for soft starter suitable for centrifugal pump of capacity 15 KW/20 HP , suitable for operating on 3 phase AC supply 415 Volts, comprising of inbuilt by-pass contractor, soft start/soft stop/adjustable current limit , essential motor protection against overload single phasing, phase sequence reversal, abnormality in supply, unbalanced current, thermostat protection through PTC, excess start time setting, PC interface & with necessary protection of start by means of contractor/relay etc. The starter shall have MCCB 63 Amp, 4 pole to control the incoming supply, transformer, under voltage protection device, over voltage protection device, semi conductor fuse, contactor, LED indicator for R/Y/B & ON/OFF indication, Amp Meter with CTs & voltmeter of suitable rating complete fixed in and including CRCA sheet 2.0 mm thick powder coated of size 700 X 600 X 250 mm minimum complete with fabrication work complete all as specified and directed. Make: L&T/ABB/Seimens.

Supply and Fix in replacement of reinforced ribbed PVC heavy duty flexible type pipe of 50 mm dia for suction sweeper with clamp as per existing including removal of old pipe and clamp all as specified and directed.

Supply and Fix in replacement of nylon rope 15 mm dia for moving suction sweeper brush holder including removal of existing damage rope all as specified and directed.

Supply and Fix in repair suction sweeper brush holder fibre wheels 3" dia incl removal of existing unserviceable wheel all as specified and directed.

Supply and Fix in repair suction sweeper trolley wheels 150 mm dia with ruber rings including taking old damage wheel all as specified and directed.

Supply and Fix in repair suction sweeper nylon brushes including taking out existing damage brushes all as specified and directed.

Supply and Fix in repair suction sweeper brush holder spring 150 mm dia,100 mm long including taking out damage spring all as specified and directed.

Supply and Fix in repair brass hose clamps suitable for 40-50 mm dia PVC pipe including taking out old clamps all as specified and directed.

Material and Labour for servicing suction sweeper pump set by cleaning thoroughly the inner portion, replacement of gland packing, bearing, lock nut, washer & ball bearings etc complete all as specified and directed.

Material and Labour for replacement of rectifier cleaning thoroughly the inner portion, replacement of cables, fuse and connector complete all as specified and directed.

Supply, Installation and commissioning for replacment of ABS white plastic deck box, suitable for light of swimming pool complete as specified and as directed by Engr-in-Charge.

Material and Labour for replacement of Flow adjastable ABS Floor Inlet nozzles UV treated with S.S. screws to fit in the up to 4" to 6'' PVC pipes for swimming pool complete fitting all as specified and directed.

Supply and Fix in repair, PVC Grating , size of 9 inch width and 25 mm height, Single pin, white blue colour for Swimming Pool complete all as specified and directed. MAKE: Austin/Volga Overflow Grating/Water tech.

Material and Labour For Opening Sand media filter of size 2.1 m dia & 1.9 m height at Swimming pool, after closing all inlet and outlet valves and removing old dirty sand media with nut & bolt, gasket, washer from filter chamber, clean complete chamber and drying, preparation of surface and filling of new sand media as per standard procedure, fixing new nut & bolt/gasket/washers as per required etc complete all as directed. NOTE: (i) Filter media required shall be measured under relavent item of this schedule. (ii) Cleaning of filter/ filling of filter media shall be carried out by specialised agency duly approved by GE.

Supply and fix in replace, Granular Fine Pebbles, size of 40 mm to 3 mm, rapid sand water filters free from all types of salts, alkaline materials, minerals, silts, impurities etc. suitable for Filter media at swimming pool, complete all as specified and directed.

Material and Labour for replacing Quartz/Silica Coarse Sand suitable for media filter at swimming pool, complete all as specified and directed

Supply and fix in replacement DOL Starter in Sheet-Steel Enclosure type MK1 suitable for capacity of 2.2kW/3HP, Suction pumpset at swimming pool, including making necessary connection complete all as specified and directed by Engr-in-charge. Make : L&T/ Crompton / BHEL /Schneider.

Supply and fix in repair CI dual flange plate check valve (DPCV) of 150-160 mm dia flange type as per existing with complete acessories and nut bolts, gasket etc. for swimming pool, all as specified and directed.

Taking out old unsv CI butterfly valves of 150 mm dia, suitable for 160 mm dia pipe at swimming pool, complete all as specified and directed .

Supply, Installation, testing and Commissioning in replacement of 150mm dia CI butterfly valves, suitable for 160 mm dia UPVC pipe, 10 Kg/Sqcm pressure rating, Including rubber gasket, flange, nut, bolts, washers as per site required for swimming pool all as specified and directed.

Taking down/out old damage UPVC Pipes of any dia and make complete all as specified and directed.

Supply, Installation, and Commissioning UPVC pressure Pipes 20 mm dia, PN 10 in replacement with plain socket suitable for solvent cement jointing & fittings, Cut to required lengths including all necessary fittings such as bends, tees, unions, reducers, flanges and plugs etc. complete all as specified and directed. Make: Supreme /Astral /Rubore/Prince.

Supply, Installation, and Commissioning Heavy duty UPVC pressure Pipes 63 to 110 mm dia, Class 5, 10 kg/sqcm (PN 10) pressure rating in replacement with plain socket suitable for solvent cement jointing & fittings, Cut to required lengths including all necessary fittings such as bends, tees, unions, reducers, flanges and plugs etc. complete all as specified and directed. Make: Supreme /Astral /Rubore/Prince.

Supply, Installation, and Commissioning Heavy duty UPVC pressure Pipes 160 mm dia, Class 5, PN 1.6, 6 kg/sqcm pressure rating in replacement with plain socket suitable for solvent cement jointing & fittings, Cut to required lengths including all necessary fittings such as bends, tees, unions, reducers, flanges and plugs etc. complete all as specified and directed. Make: Supreme /Astral /Rubore/Prince.

Taking down old unserviceable pressure gauges including service saddle from water drainage Heavy duty PVC pipe line of 160 mm and supply and fix pressure guages as per existing size suitable for 160 mm dia PVC pipe, pressure rating PN 06 complete with syphons and components & fittings made out of SS suitable for sewage line including testing all as specified and as directed.

Supply and fix in repair lug type butterfly valve of 300 mm dia, PN 1.6 pressure rating type (DN300 PN16), with gear box all connecting accessories as per existing including taking out old damage valve complete all as specified and directed.

Supply and fix in repair star type rubber coupling suitable for 20 HP motor pumpset including taking out unsv rubber coupling complete all as specified and directed.

Dismantling and taking out old unsv and Supply, installation, testing and commissioning in replacement of two core 10 sqmm PVC flexible insulated copper conductor unarmoured cable Wiring for under water lights from distribution panel throung existing conduict for Arga swimming pool all as specified and directed. Make: Polycab/Havells/Finolex/Anchor.

Supply and Fix in repair, Under water light fitting crown SS SMD LED light 12V, 20W and 9'' dia for Swimming Pool, including all connected acessories i.e, gasket, water proof sealing, screws etc, with complete testing as specified and as directed by Engr-in-Charge. Make:- Austin or make as approved by GE

Supply and fix in repair, Control unit of 36/40 watt, 110/230 Volts , AC / DC converter - SMPS 12.5 Amps, suitable for under water light with connecetd acessories, for Swimming pool, complete all as specified and directed. Make:- Power source/ Little wonder or as make approved by GE.

M&L for Painting with two coats of synthetic enamel paint by spray gun at Swimming Pool on exposed steel surfaces of the equipments like that pump motor set/sand media filter/LT panel/stair/control panel/suction sweeper/connected pipe pine and all exposed steel surfaces at swimming pool including removing old paint by paint removers and cleaning with scrapers complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 3 core multistranded copper conductor cable of size 10 sq mm 1100 volts grade PVC insulated including removing the existing unserviceable cable all as specified and directed. Make : Polycab/Havells/Plaza/Anchor.

All as per item No 185 above herein, but 6 Sqmm and 3 core.

All as per item No 185 above herein, but 4 Sqmm and 3 core.

All as per item No 185 above herein, but 2.5 Sqmm and 3 core.

All as per item No 185 above herein, but 2.5 Sqmm and 4 core.

Supply and Fix in repair MCB 4 Pole, C 40-100 Amps, 10 KA, 415 Volt including removing the existing unserviceable mcb all as specified and directed. Make - Legrand/L&T /Havells/ABB.

All as per item No 190 above herein, but 16-32 Amps capacity. Make :- Legrand/L&T /Havells/ABB

All as per item no 190 above herein, but single pole, 5-32 Amps, 230 volt rating capacity. Make- Legrand/L&T /Havells/ABB

Supply and fix in repairs 3 Pole, 415 volt, motor protection circuit breaker, thermal magnetic with screw clamp terminals as per existing including removing the existing unserviceable cable all as specified and directed. Make- Schneider/ABB/L&T

Supply and fix in repairs 2 Pole RCBOs for Earth Leakage, Overload & Short circuit protection 240/415 volt, C type 16 Amps, sensitivity of 300mA, 10 KA short circuit capacity protectiv breaker, with screw clamp terminals as per existing including removing the existing unserviceable all as specified and directed. Make- L&T/Legrand/Schneider/ABB.

All as per item no 194 above herein, but sensitivity of 100mA, 10 KA shor circuit rating.

Material and Labour for servicing of LT panel (1.5mx1.2mx.50m) of capacity upto 250 Amps suitable for AC supply by strip opening the doors of the panel and carrying out the cleaning of the panels with CRC spray and tightening the loose connections of the panel including minor repair/repalcement of the cable glands, phase voltage preventer, lugs, indication lamp, connector, lock arrengment, multimeter, rotary handle of the MCCB, soft push button wherever required, replacement of the old teared/ unsv insulation from the bus bar, fixing the LT sleeve and refixing the heat shrinkable insulating tape sleeve suitable for 1.1 kv busbar not less than 3mm thick having dielectric strength not less than 1.1kv/mm and LT insulation tape for CT/ PT connection complete and testing and commissioning the bus bar all as specified, rectifying the internal copper wiring as 1.5/2.5/4/6/10 sq mm size of the panel alongwith control wiring between MCCB, MCB, Contactor, CT, PT, Earth fault relay, over current relay and digital multi function meter, paintting of the LT panel inner and outer surface by spray with the two coat of synthetic enammelled paint over a coat of red oxide primer all as specified and directede by Engr - in- charge. Note:- (a) The above quoted rate includes the cost of the insulators, nuts, bolts, washers and cable gland required for the repair of the panel

Opening / checking and servicing the LT Panel mounted on angle iron for street light located in swimming pool at arga, cleaning the bus duct chamber, inspect the complete panel, tighten the nuts & bolts of incoming, outgoing MCCBs/SFU of different capacity and cleaning, applying thick coating of Z931 strippex B and Z 955 strippex (SL) high temperature tape for preventing from flash over & fire hazard including replacement of 3mm thick gasket, closing of all holes and changing of the same complete all as specified and as directed. Note : The quoted rate deemed to be included the nut & bolts, washer and similar items required for proper functioning of the LT Panel board.

Dismatling and taking out old unserviceable steel structures and M & L for Steel structural fabrication works fabricated from structural steel sections including nuts, bolts,washers, welding ,bending cold or hot, drilling holes for bolts or making I beam as cross beam support for pumset and oultlet pipe in any shape or size including two coats of synthetic enamel black paint over a coat of anti corrosive primer coat complete all as specified and as directed.

Supply and fix in repair Dsine MCCB of 250 amp, 415 volt, 35 kA, 50 Hz capacity with rotary handle switch as per existing for motor control/ Distribution panel including all connected accessories with complete power connection all as specified and directed

Taking down old unsv existing flood light of any wattage and make including conneted items complete all as specified and directed by Engr-in-charge.

Supply and fix in repair LED flood light of capacity 120 watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver complete with additional surge protector of capacity 10 kv all as specified. Make: Havells/Crompton/Philips/Bajaj. Note:- a) The above quoted rate incles the fixing of the LED flood lights on the steel pole of min height 11 mtrs.

All as per item No 201 herein before, but 90 watt capacity LED light complete all as specified and directed.

Supply and Fix in replacement high bay luminaire 80 watt round type LED midbay with PDC housing, integrated PC optics, 4kv in built and 10kv external surge protection, IP66 ingress protection with additional safty chain, suitable for ceiling (surface/ suspended) mount all as specified and directed. Make- Bajaj/Havells/ Crompton/Philips.

Material and Labour cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in support of, foundation and hard standing, finishing surfaces even and fair without using extra cement all as specified and as directed.

Material and Labour cement concrete 1:3:6, type B-1 (using 20 mm graded crushed stone aggregate) as in support of, foundation and hard standing, finishing surfaces even and fair without using extra cement all as specified and as directed.

Material and Labour for repair to HDPE/PPR pipe of different size 110 to 300 mm dia by dismantling/cutting the existing joint/pipe and rectifying the defecets noticed and rejoining the pipe by using existing HDPE/PPR joining process, seal, gasket, flanged and testing for any leakages and complete all as specified and directed.

Material and Labour in replacement earthing complete with galvanized cast iron earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised iron strip 25×4mm as eargalvanised iron by means of bolts, nuts washers and check nuts of steel/ GI duly protected with 15 mm bore light grade pipe upto main board, 20 mm bore watering pipe light grade with CI/ MS funnel and wire mesh including excavation, earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 m, charcoal dust and common salt in adequate qty all as shown in electrical plate No 3 of SSR Part-I 2009 having pit and cover in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40 x 40 x 6 mm grouted in PCC pit for PCC cover, funnel with wire mesh complete and all as specified and directed by Engr-in-Charge. NOTE: The unit rate quoted shall be deemed to include for necessary excavation and earth work, PCC 1:3:6 type C-1 chamber, funnel with GI medium grade watering pipe 15 mm bore, RCC cover slabs 50 mm thick with 8 mm dia CTD bars @ 140 mm C/C both way etc.

Supply and fixing in replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to wall/ poles or any other indicated situation for loop earthing etc. as required 25x4mm strip galvanised iron complete all as specified.

MHALASA CONSTRUCTIONS (BID ID -3108378)

SRI GURUPRASAD INFRATECH (BID ID -3103088)

M/S. B G GAONKAR (BID ID -3101030)

U k Enterprises (BID ID -3108754)