REPAIR TO DRAIN FOOTPATH HARDSTANDING DRIAN CULVERT AND MISC WORKS AT VARIOUS LOCATIONS UNDER AGE BR I OF GE AF ADM AREA AT AF STATION AGRA

Amount

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 02 above but except Bricks NOTE: Old brick retrieved from demolition shall be used.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, excavation, returning filling and demolition of existing kerb stones complete comlete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains including formwork and demolition of cement concrete as in floor complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition of cement concrete complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor etc. including demolition of cement concrete complete all as specified and directed.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 60mm thick M-35 grade rubber moulded factory made machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved and joints filled with sand complete all as specified and directed.

All as per item No. 15 above but except paver blocks. NOTE: Old paver blocks retrieved from demolition shall be used.

M&L for Sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes and dismantling of old tiles complete all as specified and directed.

M&L for rubber moulded coloured chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes and dismantling of old tiles complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in path finished even and fair including demolition of cement concrete as in floor complete all as specified and directed.

M&L for Forming 12mm thick, 100 mm deep expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to walls with clamps complete all as specified and directed.

S&F PVC(SWR) bends with access door 110mm dia complete all as specified and directed.

S&F Stack clamps for 100 mm bore pipe made out of 50 mm x 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L mild steel framed work with angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including taking down existing steel sections of any type and in any location complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition of cement concrete complete all as specified and directed.

Supply only MS galvanised chain link fencing complete all as specified and directed. Note: Weight of fencing shall be decided by BOO.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire including dismantling of exsiting fencing complete all as specified and directed.

Supply only mild steel flat, round or square bars for weaving of chain link fencing conforming to Fe-410-W, Gde E-165, quality 'A' complete all as specified and directed.

Supply only mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16 to 18 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm long complete all as specified and directed. Note for item No. 29 & 30 : Rate for fixing shall deemed to be included in rates of Srl item No. 28 above

S&F in repair welded steel wire fabric weight not exc. 4 Kg/Sqm fixed to wooden or steel members complete all as specified and directed. Note: Weight of fencing shall be decided by BOO.

S&F in repair mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed .

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 10 mm thick sand stone slab in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

M&L 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour, area of stone exceeding 0.25 sqm but not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement (corrugated, semi corrugated etc) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement (corrugated, semi corrugated etc) complete all as specified and directed.

S&F in repair providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in louvers and jallies, 45 mm thick (measured solid), including all mouldings frame but excluding frames including necessary form work, set in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work and demolition of existing concrete complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster/washed stone grit complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

M&L Reinforced Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, parapets and railing upto 60cm in hight, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork and demolition of cement concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.

M&L for removing old painted(any number of coats)surface of concrete/brick/plaster by burning off by blow lamps/ paint removers and cleaning with scrapers, and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of concrete of any description and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed.

Cleaning and opening of road/path culvert of length not exc 10 m and any dia and removing debries outside the MOD land complete all as specified and directed.

Cleaning and opening of road side drainage pipe of any dia and removing debries outside the MOD land complete all as specified and directed.

Abhi Construction

M/s Pooran Singh and Company

M/s K S Builders

B K Construction Company

Sethi Brothers

C P Singh and Co

Sree Ram Enterprises

Mohd Gulab Hussain

deva engineers

M/s M S Sharma and Co.