SMART PERODICAL SERVICES TO OTM/ MD ACCN AT D-III ZONE UNDER AGE B/R-I OF GE (N) MAMUN

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make surface free from dust, loose paint etc complete all as specified and directed. Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work.

M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared surface of wall, sanding of putty surface with mechanical wall sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface smooth, clean, free from dust etc using following steps complete all as specified and directed:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction, mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface. Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work.

M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio, applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, antifungal / anti algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between 1st and subsequent coats of paint complete all as specified and directed.

M&L Preparation of old plastered/unplastered surfaces of walls by scraping down smoke soot, mould mass and effloroscent salts, tading oil & greasy spots, filling of cracks and small holes with crack filling paste, making even and smooth with whitening and applying two coats of white wash on old decorated surface of walls complete all as specified and as directed.

M&L Preparation of old plastered/unplastered surfaces of ceiling by scraping down smoke soot, mould mass and effloroscent salts, tading oil & greasy spots, filling of cracks and small holes with crack filling paste, making even and smooth with whitening and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of walls surface of any type/description viz. distemper, emulsion etc using mechanical means/grinder, cleaning surface to receive finish, stopping the holes/dipressions with POP/whiting/putti where required to obtain smooth, even surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of walls surface of any type/description viz. distemper, emulsion etc using mechanical means/grinder, cleaning surface to receive finish, stopping the holes/dipressions with POP/whiting/putti where required to obtain smooth, even surface and applying one coats of oil bound distemper complete all as specified and directed.

Preparation of old painted steel or iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.