CREATION OF ENTRY AND EXIT ROAD AND 100 M APPROACH ROAD UNDER GE PANAGARH

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil,complete all as specified and as directed by Engrs-In-Charge.

Excavating over areas, n.exc 1.5 m deep and getting out in Soft/loose soil ,complete all as specified and as directed by Engrs-In-Charge.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point in soft/loose soil ,complete all as specified and as directed by Engrs-In-Charge.

M & L for Rolling and consolidating formation surfaces in filling by power roller exc 8 tonne & n exc 12 tonne capacity to required gradient and camber,complete all as specified and as directed by Engrs-In-Charge.

Kankar or laterite for subbase, spread, rolled and consolidated to gradient and camber required in four layers of each 100mm thick,complete all as specified and as directed by Engrs-In-Charge.

M&L for 150mm thick Soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber,complete all as specified and as directed by Engrs-In-Charge.

M&L for 10cm thick (compacted thickness) WBM, with coarse aggregates of grading 1 (90 to 40mm size) with granite, trap or basalt, spread, rolled and consolidated to gradient and camber required,complete all as specified and as directed by Engrs-In-Charge.

M&L for Preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Applying evenly a priming/tack (VG-10) coat with bituminous primer at 10 kg per 10 sq metre ,complete all as specified and as directed by Engrs-In-Charge.

M & L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc,complete all as specified and as directed by Engrs-In-Charge.

M&L for Applying evenly a priming/tack coat (VG-10) with bituminous primer at 5 kg per 10 sq metre by using paving bitumen,complete all as specified and as directed by Engrs-In-Charge.

M&L for Premix bituminous, macadam (VG-30) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) the binder content of premix macadam shall be 4% by wt of the total mix by using paving bitumen any penetration, complete all as specified and as directed by Engrs-In-Charge.

M & L for applying 25mm thick mastic asphalt consisting of an intermate homogeneous mixture on mineral filler, well graded fine and coarse aggregate industrial grade 85/25 bitumen as per IS 73 of 2006 cooked at 170 degree to 200 degree centigrade laid hot trowelled and floated by means of wooden float bitumen mastic after spreading and while still hot in plastic condition shall spread over with bituminous precoated fine aggregate of size 20mm @ 0.005 Cum per 10 Sqm mixed with 0.17 Kg per 10 Sqm of industrial bitumen grade 85/25 for antiskiding including all material, labour, tools and plants , complete all as specified and as directed by Engrs-In-Charge.

M&L for 100mm thick PCC 1:4:8 type D2 using40mm stone aggregate as in sub base ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 150mm thick PCC 1:4:8 type B1 using 20mm stone aggregate as in flooring fished even and smooth,complete all as specified and as directed by Engrs-In-Charge.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide ,complete all as specified and as directed by Engrs-In-Charge.

M & L for 2mm thick, white/yellow hot thermoplastic road marking paint, confirming to BS standards 3262 with 20% of glass beads (intermixed) applied with manually operated machine suitable for hot application at desired temperature, painting as in strip (contnious/braking) , complete all as specified and as directed by Engrs-In-Charge.

S&F ABS round body (delineator) fitted with 2 Nos 110mm dia high reflective made of PMMA and reflector having a pipe (duly powder coated ) and two small rectangular reflector of size 70X23mm,2 Nos each side are also provided for better reflecting , complete all as specified and as directed by Engrs-In-Charge.

S&F Cat eye size 90X110X17mm for road side fixing ,complete all as specified and as directed by Engrs-In-Charge.

Excavating in trenches n.exc 1.5 m deep and getting out in Soft/loose soil ,complete all as specified and as directed by Engrs-In-Charge.

Demoltion of reinforced cemment Concrete of any description and in any position not otherwise specifically provided ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundation and mass filling ,complete all as specified and as directed by Engrs-In-Charge.

M&L for M-25 Design mix using 20mm stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified and as directed by Engrs-In-Charge.

M&L for M-25 Design mix using 20mm stone aggregate Columns, pillars, piers, posts and struts,complete all as specified and as directed by Engrs-In-Charge.

M&L for M-25 Design mix using 20mm stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) ,complete all as specified and as directed by Engrs-In-Charge.

M&L for M-25 Design mix using 20mm stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified and as directed by Engrs-In-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte for rough finished surfaces of concrete,complete all as specified and as directed by Engrs-In-Charge.

Formwork such as walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses,complete all as specified and as directed by Engrs-In-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete,complete all as specified and as directed by Engrs-In-Charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished of square, rectangular or polygonal surfaces of concrete ,complete all as specified and as directed by Engrs-In-Charge.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed by Engrs-In-Charge.

M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ,complete all as specified and as directed by Engrs-In-Charge.

M & L for rendering 5 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement etc,complete all as specified and as directed by Engrs-In-Charge.

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall ,complete all as specified and as directed by Engrs-In-Charge.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 ,complete all as specified and as directed by Engrs-In-Charge.

Preparation of new painted surfaces of steel and applying two coat synthetic enamel paint to steel surfaces of any description not otherwise described over 10cm width or girth ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 75 mm thick moorum/red bajri filling , spread ,rolled and consolidated to gradient and camber required, complete all as specified and as directed by Engrs-In-Charge.

ROY ENTERPRISE