ADDN/ALTERATION AND SPECIAL REPAIRS OF 68 QTRS (TYPE-P) AT SHANKAR VIHAR UNDER GE(SOUTH) DELHI CANTT-10

Amount

B/R PORTION

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes in apron detc complete all as sopecified and directed

M & L for Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floorscomplete all as sopecified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Balcony Parapet wall) complete all as sopecified and directed

Reinforced cement concrete (nominal mix) in type B-I 1: 2 : 4 ( 20 mm graded stone aggregate) as in fins, fascias, louvres, parapets, and railings exc 60 cm in height, newels, balustrade, and the like complete all as sopecified and directed

S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars to receive gunniting treatment over existing surfaces complete all as sopecified and directed

S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as sopecified and directed

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better, fair finishes complete all as sopecified and directed

M&L for 50 mm thick (avg) guniting in patches on to the required area on RCC parapets walls, columns, beams, stairs, lintels, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and sand mortar 1:3 (1 cement : 3 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor kp-100 or equivalent grade over reinforcement wherever necessary providing and tying in position with 75mm x 75mm, square size with 2.946mm dia mild steel wire welded mesh over treated surface ready to receive grouts, curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. Note: (i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allow to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is to be done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer or equivalent. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

M & L for Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as sopecified and directed

M & L for Demolition of mud in roof, any thickness, including plastering and leaping upto two to three storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as sopecified and directed

M&L 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) as in flooring/ roof pedding , finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to two to three stories bldgs, complete all as specified and directed. Note : The PCC shall be laid in panles not exc 2.5 sqm area of one panel

M & L for APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.0 Kg per Sqm , black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.5Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100mm at the sides and 150mm at the ends, as per manufacturers instructiions complete all as sopecified and directed

M&L for plain cement concrete tiles with grey cement and no pigment as in roof tiles of size 250 mm x250mm x 20 to22 mm thick laid over 20 mm thick bedding in cement mortar (1:6) and gap between tiles not exceeding 8 mm , grouted up to full thickness of tile with cement mortar (1:3) Mixed with water proofing compound complete all as sopecified and directed

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work as in coping complete all as sopecified and directed

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sopecified and directed

M & L for Machine cut 18-20mm thick Kota stone slab flooring as in treads of staircase over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over cement screed of 10mm in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Glazed Ceramic tile of size 450x300x7mm (coloured digital series of manufacturer's ) as in vertical surface with highlighter pattern set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat in CM (1:4) complete all as specified and directed (Note :- Highlighter pattern/design shall be approved by GE)

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic tiles double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles double charged 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as sopecified and directed

M&L Non Skid ceramic tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as sopecified and directed

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as sopecified and directed

S & F Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete.Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete.

S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified.

S&F in repair CP health faucet with hand shower and 1.5 mtr flexible stainless steel pipe suitable for fixing to 15 mm dia pipe complete all as sopecified and directed

S & F Toilet paper holder of mild steel Chromium plated ‘D’ type, fixed in repairs to walls with chromium plated brass screws complete all as sopecified and directed

S & F in repair Vitreous china wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as sopecified and directed

S&F in repairs elegent mirror PVC cabinet without towel rail of size 422 x 622 mm complete all as sopecified and directed

S & F in repairs brass chromium plated tubular towel rail, 20 mm dia D type , 60 cm long between flanges complete all as sopecified and directed

S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to steel pipe complete all as sopecified and directed

S&F in repairs 6 mm thik glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample kept in GE Office and approved by GE) complete all as sopecified and directed

S&F in repairs wash hand basin mixer with hot & cold water provision (central hole) 15mm dia CP brass fancy type including joints to steel pipe or unions complete all as sopecified and directed

S & F in repairs Brass CP Wall mixer(Non Telephonic Type) with L bend 3-in-1 for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed

S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions complete all as sopecified and directed

S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as sopecified and directed

S&F in repair 15 mm dia angle /stop valves, cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch and butterfly handle, screwed with iron pipes or for union complete all as sopecified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm long or as required at site complete all as specified and directed.

Demolition of lime concrete in floors of any description complete all as specified

M & L 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over 250 mm thick lime concrete with 40mm brick agrregates (Lime Mortar 1:3) as in filling of sunken floors over a layer of polyethylene film black 50 micron over a layer of bitumen blown any grade applied hot (1.5 Kg/sqm) over 10mm thick rendering in cm 1:3 with WPC @2% by wt. of cement including treatment to side wall of sunken complete all as specified & directed Note Over all floor area only be measured for payment, rate for side wall deemed to be included.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as sopecified and directed

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as sopecified and directed.

Taking down shutter of any description exc 1.00 sqm but n.exc 2 sqm each complete all as specified and directed..

S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as sopecified and directed

M & L for Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and directed.

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated as specified.

S&F 35 mm thick factory made II class Hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/gauge etc divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters as specified in SSR Part I section 8 clause 8.24(a) complete as specified and directed

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as sopecified and directed

Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and directed.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified and directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and directecd Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S&F fibre glass Reinforced Plastic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified.

S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified

S&F 30mm thick factory made prelaminated FRP glazed and skelton door shutter with both side laminated with decorative choice lamination including stainless steel wire cloth, 0.36mm nominal dia of wire and average width of perture 1.40mm complete all as sopecified and directed. NOTE : Number of pannels will be decided by Engr-in-charge

M&L for stainless steel (SS) 316 grade any section like tee, angle hollow pipe and square/rectangular tube flat plates etc as in window grill fixed with necessary fittings SS screws, nut, bolts, fastners, washers etc (as approved by Engineer -in-Charge) including necessary cutting drilling profile cutting of components to required lenght/width and shapes /profile adn smooth grinding/maching of edges/faces /all welding joints including buffing and polishing complete all as sopecified and directed. NOTE : Design/Pattern of grill shall be approved by GE

M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as sopecified and directed

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as sopecified and directed

Supply and fixing in Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of perature 1.40mm and fixed with galvanised steel wire staples in door/windows and similar work complete all as sopecified and directed

S&F, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pan complete all as specified and directed .

S&F 4 mm thick Figured glass , pin headed type in squares not exceedig 0.50 sqm each pane complete all as specified and directed..

S & F for mild steel, 150 to 200 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified and directed

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as sopecified and directed

M&L for preparation of old painted Steel surfaces exc 10cm width or girth and applying one coat of aluminium paint of approved shade/tint complete all as sopecified and directed

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and directed.

S&F stainless steel AISI 304 grade handle of size 200mm long,etc. complete all as specified and directed.

S&F Stainless steel of AISI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as sopecified and directed

S&F brass Magic eye and fixed to doors all as specified and directed complete all as sopecified and directed

S & F Hasp and staple -100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete all as sopecified and directed

S & F Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as sopecified and directed

S&F floor door stopper of stainless steel of AISI 304 Grade body and tongue, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete all as sopecified and directed

S&F in repair 32 mm dia Drappery Rod aluminium anodised powder coated type, with fixing brackets, side knobs and 6 Nos rings complete all as sopecified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as sopecified and directed

M & L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete all as sopecified and directed

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as sopecified and directed

Taking up or down steel tubing and connections including removal from site complete all as sopecified and directed

a) 15 mm bore

b) 20 mm bore

c) 25 mm bore

S&F GI tubing medium grade galvanised with all fittings, laid in walls, ceiling, floors, etc complete all as sopecified and directed

a) 15 mm bore

b) 20 mm bore

c) 25 mm bore

Dismantling PVC water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as sopecified and directed

Dismantling PVC water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as sopecified and directed

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as sopecified and directed

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as sopecified and directed

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore complete all as sopecified and directed

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as sopecified and directed

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick of AISI 316 for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as sopecified and directed.

S & F in repairs Sinks without drainage board made of stainless steel 1 mm thick of AISI 316 for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe, bowl size 460mm x 410mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains complete all as specified and directed.

S&F 100 mm dia sand cast iron soil waste and vent pipes , in any length with or without ears , with cement joints laid in trenches or in floors complete all as specified and directed.

S & F 75 mm dia Cast iron (Sand Cast ) soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall complete all as sopecified and directed

M&L for 100mm Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as sopecified and directed

M&L for 75mm Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as sopecified and directed

S&F in repairs Cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 100mm in cement concrete type B1 (1:2:4) complete all as sopecified and directed

Taking down eaves gutters and rain water pipes (any size or pattern) , including all fittings , heads, shoes, bends,swann necks, etc including cleaning or refixing or removal to store complete all as sopecified and directed

M&L for 110mm dia UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

M&L for 75 mm dia UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

M&L 110 mm dia UPVC (SWR) bends any radius complete all as specified and directed

M&L 75 mm dia UPVC (SWR) bends any radius complete all as specified and directed

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 75 mm bore pipes complete all as specified and directed

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for 15mm thick rendering in Cement Motor 1:4 on faces of brick/ concrete surface, finished even and smooth without using extra cement complete all as specified and directed

M&L forg 15 mm thick rendering in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even smooth without using extra cement complete all as specified and directed

M & L for Dubbing out average 10 mm thick on irregular face of walls/ Ceiling in cement mortor 1:4 complete all as specified and directed

M&L for 5 mm thick rendering in CM 1:3 in ceiling on concrete surface finished even & smooth without using extra cement complete all as specified and directed

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty 2 mm thick complete all as specified and directed

M & L for Preparing new plastered or unplastered surfaces of wall and applying exterior emulsion paint white or tinted over & including a coat of wall care Putty 2 mm thick specified for external surface as per manufacturer instruction complete all as specified and directed

M & L preparing new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed

M&L for complete removal of existing treatment on walls by electrical grinder/ sand paper/ steel patti thereafter prepartion of walls by filling of holes and cracks with wall care putty, specified for external surface as required area of surface and applying two coats of exterior emulsion paint (weatherproof /Apex) over a coat of wall care Putty 2 mm thick specified for external surface as per manufacturer instruction complete all as specified and directed

Complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & over a coat of wall care putty 2 mm thick complete all as specified and directed

Complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and preparing old plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M & L for complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Cutting openings for AC fitting through brick walls built in cement mortar or cement lime mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed

M & L for Forming jambs, in CM 1:6 etc., to openings (to foregoing item), including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work complete all as specified and directed

M&L for purpose made built in cupboard shutter for easy closing and opening not straightening shutter and shutter locking rod complete all as specified and directed

S&F in repair built in mortice latch of 100 mm size for steel almirah with two levers vertical type MS body & fixed as per sample all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required complete all as specified and directed.

S & F 18/19mm thick pre laminated PVC moulded solid cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.

S & F in repair CP clip on hinges (Inset) complete all as specified and directed .

S & F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified and directed

S&F in Repair U shaped double stainless steel channel of size 10 mmx 20mmx 1.50 mm fixed to wooden frame including suitable rail / rollers etc complete all as specified and directed .

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified and directed (opening of shutter exc 200 m and not exc 350 m and area exc 6.00 sqm and n.exc 9.00 sqm all as specified)

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 mcomplete all as specified and directed

S&F in repair 15mm mild steel, chromium plated rod with fixing brackets, fixed in cupboards for hanging cloth of adequate strength complete all as specified and directed.

S& F staianless plate rack made of 0.8 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg of AISI 316 and as per sample kept in GE"s office complete all as specified and directed.

S&F stainless steel round dia 10mm baral tower bolts 200 mm long complete all as specified and directed

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and directed.

S&F bib tap standard of PTMT any color high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed

S&F stop valve standard of PTMT any color high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed

S&F stop angle valve standard of PTMT any color high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and directed

M &L 150 mm thick Hardcore with Broken stone or boulders of gauge n exe 63 mm deposited, spread and levelled in layers, watered and rolled/rammed to a true surface complete all as specified and directed

M & L 100mm thick Cement concrete type C- 2, 1:3:6 (ussing 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed

M&L for Coloured (Chequered/ Plain as approved) cement concrete tiles with colour pigment 300cm x 300cm x 20 mm thick set, jointed and pointed in cement slurry to Match over 15mm screed bed cement mortar in1:6 in floors complete all as specified and directed

E/M PORTION

Taking down unserviceable sub main wiring twin core any size complete and making good disturbed surface complete all as specified and directed

M&L for sub main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 4 runs of 10 Sqmm for phase and neutral and 1 run of 10 Sqmm for earth wire drawn through suitable size of PVC concealed conduit and including replacement of unsv pressed steel terminal boxes of in wall not less than 25 mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement and all as directed by Engr-in-charge. (Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. Five runs of cable for 3 phases/ neutral and for earth will be measured and paid as one unit length) complete all as specified and directed

Taking down carefully aluminium point wiring (light, fan, socket, terminal box or power) including switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed Note:- Temporary power supply shall be provided by contractor.

M&L for concealed point wiring with 1.5sqmm as per IS specification PVC insulated FRLS 1100 volts grade electric cable, unsheathed stranded copper conductor cable drawn through concealed PVC conduit pipe and including modular steel terminal boxes with all accessories complete in walls, modular white cover plate with frame suitable for modular switches, modular sockets, modular fan regulator etc with screw, cup washer and 1.5 sq mm copper earth continuity wire connected to celing rose to fitting and earth dolly complete all as specified and directed. Note-the rate is inclusive cutting/ chasing and making good disturbed surface with CM 1:3 and same surface finshes with the adjoining surface of disturbed area with ODB/colour wash/ white wash comlete.

(a) One light/ bell point controlled by one switch.

(b) One bulk head light point controlled by two 2-way switches.

(c) One switch socket outlet type 5 pin 6 amps on same board

All as per item No 151 above but 1.5 sq mm cable and 1.5 sq mm copper earth dolly complete all as specified and directed

(a) One switch socket outlet type 5 pin 6 amp on independent board.

All as per item No 151 above but 2.5 sq mm cable and 2.5 sq mm copper earth dolly complete all as specified and directed

(a) One switch socket outlet type 5 pin 16 amp on independent board.

All as per item No 151 above but 4 sq mm cable and 4 sq mm copper earth dolly complete all as specified and directed

(a) One sheet metal enlosure point on independent board.

Supply and fixing in replacement surface mounting tube light fitting, 1X20 watt, 230 volts 4 ft LED CRCA batten including retrofit T8 glass (LED tube rod) with and including, internally pre wired with all accessories and including connecting up to fitting complete all as specified and directed

Supply and fixing in replacement surface mounting tube light fitting, 1X10 watt, 230 volts 2 ft LED CRCA batten including retropit T8 glass (LED tube rod) with and including, internally pre wired with all accessories and including connecting up to fitting complete all as specified and directed

S&F bulk head in engineering plastic housing with clear prismatic diffuser, 6 watt in replacement of old unsv bulk head/Sketch/LF fitting including all accessories connecting up twin core flexible copper conductor cable complete all as directed.

Supply and fixing in replacement angular lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

Supply & fixing 9 watt LED bulb complete all as specified and directed

Supply and fixing in replacement surface mounting round shaped LED down lighter with durable housing with aluminium heat shink with diffuser to give glare free light with removable driver 6 watt LED 6000K lamp type complete with and including, internally pre wired with all accessories, and including connecting up to fitting, all as specifide and directed by Enge-in-charge.

S&F in replacement of building security light fitting 30W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light suitable for pole dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc and all as directed.

S&F Ceiling Fan 1200 mm Sweepin white colour, Energy saving fan, BEE 5 Star Rating including taking down of old ceiling fan and depositing to MES store yard and connecting up with replacement of cable T/C flexible cable of size 0.50 Sqmm from ceiling rose / connection to fan complete all as specified and directed

S&F in replacement 0-4 step type electronic modular regulators for ceiling fan 1200 mm sweep, 240 volts complete all as specified and directed

S&F Exhaust Fan metal body, copper wound 300 mm Sweep with burd guard (louvers), including taking down of old exhasut fan and depositing to MES store yard and connecting up with replacement of cable T/C flexible cable of size:- 0.50 Sqmm from ceiling rose / connection to fan complete all as specified and directed

S&F in replacement call bell ding dong AC 230 volts single phase complete all as specified and directed

S&F in replacement modular bell push flush type 6 amp, 1 module complete all as specified and directed

S&F in replacement ceiling rose, two to three terminals complete all as specified and directed

S&F in replacement modular switch 1 way 6 amp, 1 module complete all as specified and directed.

S&F in replacement modular switch 2 way 6 amp, 1 module complete all as specified and directed.

S&F in replacement modular socket 6 amps complete all as specified and directed

S&F in replacement modular switch 1 way 16 amp, 1 module complete all as specified and directed

S&F in replacement modular socket 6/16 amps complete all as specified and directed

S&F in replacement concealed sheet metal enclosure incorporating for socket, plug top and 20/25 amps double pole MCBs, IP 30, 240 volts complete. Make-Benlo Cat No- PSBEDP06-25 or equivalent of approved make complete all as specified and directed

S&F in replacement VTPN DB 4 way double door type for fixing MCCB upto 250 Amps as incomer and MCB as out goinging with metal door and IP 43 protetions & connecting complete all as specified.

Supply and fixing in repair TPN FP 32 Amps 'C' series, breaking capacity 10 Ka, 'C' curve 440 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F in replacement MCB SP 6 to 32 Amps 240 Volts, 10kA, `C' curve all as per site requirement complete all as specified and directed

S&F in replacement TPN DB 4 way double door type for fixing MCCB upto 200 Amps as incomer and MCB as out goinging with metal door and IP 43 protetions & connecting complete all as specified and directed

S&F in replacement SPN DB 2 way single door type with metal door and IP 43 protetions flush mounting for MCBs & connecting complete all as specified.

Supply and fixing in repair MCB DP 20 amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

Supply and fixing in replacement MCCB 125 Amps 3 pole 415 volts fixed type with breaking capacity 36 KA 415 volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 3 of SSR Part I, including earth test point upto panel board, all as specified or indicated including testing on completion complete all as specified and directed

Taking down old unsv geyser 35/50 ltrs capacity complete all as specified and directed . Note: Old unsv geyser shall be deposited in AGE E/M store yard.

Taking down any type and make single phase electric meter and deposited to AGE E/M store yard complete all as specified & directed

S&F water heater storage type, electric, capacity 25 litres. BEE 5 star rated Inner container of copper material complete all as specified and directed

M&L for fan point controlled by one switch with PVC insulated, unsheathed, multistranded, single core copper conductor cable FRLS, 1.5 sqmm drawn throught existing PVC conduit (for ceiling portion only) and including PVC conduit and modular steel terminal boxes with all accessories complete in walls, modular white cover plate with frame suitable for modular regulators, modular switches etc with screw, cup washer and 1.5 sqmm copper earth continuity wire connected to ceiling rose to fitting and earth dolly complete all as specified and directed. Note :- In case any problem in existing conduit, PVC casing capping in surface of ceiling will be provided without any extra cost.

M P TYAGI ENGINEERS AND CONTRACTORS

AMIT ASSOCIATES

ASSOCIATED CONSTRUCTION CO.

Third Wave Services Pvt Ltd

Bidder Name

AMIT ASSOCIATES

Powerlite Engineers

Third Wave Services Pvt Ltd

M P TYAGI ENGINEERS AND CONTRACTORS

ASSOCIATED CONSTRUCTION CO.