ADDN/ALTN TO SUVIDHA COMPLEX AND COMMUNITY HALL ALONG WITH CERTAIN E/M WORKS AND BR MINOR WORKS AT SITE P AFS UNDER GE AF THANE

Amount

S&F Roof Trusses (framed), purlins, crane gantres, rails, fastening and heavy bracket framing (beam, angle tee Tubular, flat sections, including distance pieces) cleats etc Fe 410 W GdeE-250 ,complete all as specified and as directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, incl fixed with self tapping screws ,complete all as specified and as directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, incl fixed with self tapping screws ,complete all as specified and as directed by Engr-in-charge.

S&F Mild steel screw bolts dia 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm n exc 10cm long ,complete all as specified and as directed by Engr-in-charge.

Material and labour for providing & fixing false ceiling at all heights with GRG (Glass fiber reinforced gypsum) false ceiling tiles of size 595x 595 mm of approved texture, design and patterns having moisture content less then 2%, humidity resistence of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, noncumbustible as per BS 476 (Part 4) 1970 and light reflectance of 85% (minium) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both side)comprising of main T runners of size 15 x32 mm oflength 3000mm, cross-T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x600mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm) i.e. 50mm long, 8mm outer diameter, M-6 fastener , 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, glavanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wooden screws. The work shall be carried out as per specification, drawing and as per direction of Engineer-in-charge ,complete all as specified and as directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed by Engr-in-charge.

Taking down carefully existing bitumen tar felt including coba,plaster of any description over the surface of roof, terraces including flashings and junctions of parapet/curb walls etc and removing of the rubbish to a distance exceeding 500m but nexc 1.00km and depositing where directed ,complete all as specified and as directed by Engr-in-charge.

M&L for Virified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 ,complete all as specified and as directed by Engr-in-charge.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket tc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including glazing clip and powder coated aluminium beading ,complete all as specified and as directed by Engr-in-charge.

S&F Veneered decorative plywood 12 mm , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work/ Aluminum Partition ,complete all as specified and as directed by Engr-in-charge.

M&L for Granite (of any type) 20mm work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) sing marble dust with admixture of pigment to match with shade of granite ,complete all as specified and as directed by Engr-in-charge.

M&L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 set in CM 1:4 , exc. 10 cm in width and setting in mortar ,complete all as specified and as directed by Engr-in-charge.

M&L for Hardcore Broken stone Loose filling with aggregates of gauge 80 to 40 mm in soakage pits, soakage wells, platformss etc ,complete all as specified and as directed by Engr-in-charge.

M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base ,complete all as specified and as directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed by Engr-in-charge.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls ,complete all as specified and as directed by Engr-in-charge.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing antilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ,complete all as specified and as directed by Engr-in-charge.

Dismantling framed trusses exc 10 but n exc 15 m span ,complete all as specified and as directed by Engr-in-charge.

S&F Bib taps CP 15MM, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and as directed by Engr-in-charge.

M&L 75 mm PVC (SWR) Floor trap, plain with grating incl jointing with solvent ,complete all as specified and as directed by Engr-in-charge.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors ,complete all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

S&F Door closer hydraulically regulated, extruded Aluminum designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ,complete all as specified and as directed by Engr-in charge.

S&F 300 mm long aluminium anodized barrel tower bolts of extruded section and fixed , complete all as specified and as directed by Engr-in charge.

S&F aluminium alloy anodized sliding door bolt 300mm with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed , complete all as specified and as directed by Engr-in charge.

S&F for 150mm long aluminium handle cast type anodized , complete all as specified and as directed by Engr-in charge.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or to aluminum Windws or Partion ,complete all as specified and as directed by Engr-in-charge.

S&F Hasp and Staple,safety type, Aluminum Anodized 75mm including bolt to hinge plate and fixed with screws ,complete all as specified and as directed by Engr-in-charge.

S&F Health Faucet (ABS Body) MS CP 15mm with 1.25 m flexible tube and ABS Wall Hook incld making connections and fixed in position , complete all as specified and as directed by Engr-in charge.

S&F Two Way Angle cock 15MM CP incl necessary fittings etc. complete all as specified and directed.

S&F Butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , complete all as specified and as directed by Engr-in charge.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and as directed by Engr-in charge.

S&F Aluminum 4 lever Mortice lock, vertical type, size 100 mm , complete all as specified and as directed by Engr-in charge.

Excavting in Post Hole n exc 0.5 cum and getting out returing filling etc. ramming earth in layers not exc 25cm , complete all as specified and as directed by Engr-in charge.

Demolition of Conc in ground floors and pavings n exc 15 cm thickness (above or below GL) , complete all as specified and as directed by Engr-in charge.

M&L for Cement concrete in foundations, filling and mass concrete D2- 1:4:8 using 20mm graded stone aggregate , complete all as specified and as directed by Engr-in charge.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , complete all as specified and as directed by Engr-in charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over the 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate as in sub base including rubbing and polishing , complete all as specified and as directed by Engr-in-charge.

M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded stone Aggregate ) in Cement Mortar 1:4 as in window or door cills, lintels, bressumers, steps, quoin blocks ,complete all as specified and as directed by Engr-in-charge.

Rendering 15mm thick ( 10 mm thk. Cement plaser in CM 1:6 on fare faces of brick work or concrete surfaces and 5 mm thick in CM 1:4) ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new surfaces of wall and applying three coats of white wash ,complete all as specified and as directed by Engr-in-charge.

S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding ,complete all as specified and as directed by Engr-in-charge.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading ,complete all as specified and as directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and making good disturbed surfaces of walls, floors etc to match with existing surfaces of colour shade complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC casing and caping/conduit of size 25 mm or above as required at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. including concealed/open MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for One light point / fan point controlled by one switch.

Ditto as per Srl Item No 49.00 above but for One fan point controlled by one switch .

Ditto as per Srl Item No 49.00 above but for One 3 pin 6 amps socket out let point controlled by one 6 amps switch on independent board .

Ditto as per Srl Item No 49.00 above but for One 3 pin 6 amps socket point controlled by one 6 amps switch on same board .

Ditto as per Srl Item No 49.00 above but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on same board.

Supply & fix modular switch 6 Amps, one way, one module, complete all as specified and directed.

Supply & fix modular switch 16 Amps,one way, one module ,complete all as specified and directed.

Supply & fix modular socket 6 Amps, 2/3 Pin combined, two module,complete all as specified and directed.

Supply & fix modular socket 6 A/16 Amps, 6 Pin combined, two module ,complete all as specified and directed.

Supply & fix modular fan regulator stepped type 100 watts, two module ,complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body, complete all as specified and directed.

Supply & fix in repair LED lights 1x20 watt ,220 V, AC decorative box type with driver , holder including LED tube light connecteing up with three core flexible copper conductor cable of suitable size from ceiling rose including connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item ,complete all as specified and directed.

Supply and fix in repair recess/surface mounting light fittings and supply and fix new LED 15 watt surface mounting light fitting LED backlit round or square (as reqd at site) down lighter with high effcient LEDs & glare free opal diffuser IP20, internally prewired, 230V, complete with all accessories such as electronic driver, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item with all connected accessories ,complete all as specified and directed.

Supply and fixing in replacement LED Tube light fitting, 1x 5 watts, complete with 1 feet Decorative mirror type ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core ,complete all as required at site or directed.

Supply & fix in repair recess mounting high lumen LED flat panel 2'X2' 36Watt, slim fit,white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item, complete all as specified and directed.

Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping/conduit of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable itemcomplete and making good the disturbed surfaces to match with existing all as specified and directed. Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit.

Material and labour for sub main wiring complete with 2 run of 6 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 6 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item complete and making good the disturbed surfaces to match with existing all as specified and directed. Note : - 02 run of 6 sqmm single core copper conductor cable and 01 run of 6 sqmm single core copper conductor and 01 run of PVC casing and caping shall be measured as one unit.

Supply and fix in repair, factory made, sheet metal enclosure, double door, 415 volts, AC,TPN, vertical distribution board, 4 way, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, and making good the disturbed surfaces to match with existing all as specified and directed.

Supply and fix in repairs MCB distribution board SPN 8 way 240 volts, double door with IP 42 protection duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 Amps rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate including removing old unserviceable item complete and making good the disturbed surfaces to match with existing all as specified and directed.

Supply and fix in repair MCB SP 6 to 32 Amps,10 KA, "C" series, 240 volts, complete all as specified and directed.

Supply & fix in repair MCB SPN 32 Amps 10 KA, "C" series, 240 volts ,complete all as specified and directed.

Supply & fix in repair MCCB FP 63 Amps,16 KA, 240 volts, complete all as specified and as directed.

Supply and fix in replacement of sheet metal enclosures with two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed.

Supply,lay and testing in replacement of over head line or cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with multistranded aluminium conductor of cross-sectional area 50 sqmm; 3.5 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed.

Ditto as per Srl Item no 72.00 above but of size 70 sqmm, 3.5 core

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil ,complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed.

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose.

Supply and laying unreinforced precast factory made concrete cable cover, class LV, Type -I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed.

M&L for cable route indicator LT Type made of metal cast iron, the strip size not less than 32x4 mm,height 300 mm and round shape of dia not less than 8 cm with embossed LT welded or riveted strip and round plate each other including adequate qty of PCC 1:3:6 type C1 20 mm dia aggregate , complete all as specified and directed.

Supply and lay GI pipe 50mm dia light grade with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item ,complete all as specified and directed.

Supply, installation, testing and commissioning LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz Outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation, factory fabricated made out of 3.2 mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminium strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequate size for MCBs, housed in a separate bus bar chamber and control wiring adequate size and length, outgoing MCCBs shall have extended bus bar links and Panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) in foundation design subject to approval of GE as per site requirement. The minimum depth, height, width of panel is 450x1800x1500 mm respectively, minimum clearance from ground level is 450mm including removing old unserviceable item complete all as specified and directed and comprising of following :- Note :- (i) contractor shall provide CPRI certification of the panel. (ii) All items incorporated in panel is ISI marked or IS specification . (a) MCCB 250 Amps,FP, 35 KA, Adjustable type,415 volts,50Hz-01 No (b) MCCB 100Amps,FP,16 KA,Adjustable type,415 volts,50Hz-3 Nos (c) MCB 63 Amps,FP,10KA,415 volts,50Hz-3 Nos (d) Digital voltmeter,with VSS -01 set,Digital, Ammeter,with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 400 Amps rating -01 set

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR 2020 including testing on completion including taking down existing unserviceable earthing complete all as specified.

Ditto as per Srl Item No 82.00 above but using galvanised iron strip as earthing lead

Supply & fix fans wall mounting 230 volts single phase oscillating 400 mm sweep complete fitted at any height required at site , complete all as specified and as directed by Engr-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , complete all as specified and as directed by Engr-in-charge.

Supply,install, testing and commisioning of split type air conditioner 2 TR capacity with cooling function of inverter technology with cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, drain pipe of suitable size brought upto ground level from any height including making cable connection by providing three core 2.5 sqmm copper conductor cable PVC insulated, sheathed of adequate length as required at site and initial filling of refrigerant gas including making round hole on existing any type of wall (core cutting if required) for taking up refrigerant tubing, drain pipe and cables etc and making good the disturbed surface by matching with existing adjoining surfaces , complete all as specified and as directed by Engr-in-charge.

M/S VISHRANTA CONSTRUCTION

M/s Mukesh Engineers

Anjali Constructions

Vishal Builders

MSK Everlast Enterprises

M/s Shree Construction Co