SPECIAL REPAIR/RENOVATION OF ROAD IN KV-2 STAFF QTR IN SV AREA AT AF STN KALAIKUNDA UNDER GE AF KALAIKUNDA

Amount

M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed .

M&L for Premix bituminous,macadam with 4% binder content by weight of total mix (using paving bitumen of VG-30) laid/rolled and compacted to required gradient and camber rolled/laid with power roller (consolidated thickness 75mm or less) including preparation of area before laying of macadam complete all as specified and as directed. ( Note :- 1. Exact quantity of binder to be used shall be ascertained by Design mix. 2. Minimum of 4% of binder shall be used.However in case more than 4% of binder content is required as per design mix,the same shall be provided by the contractor at no extra cost.)

Preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor and with gunny bags to remove all loose dirt etc. and applying evenly a tack coat of bituminous primer (using paving bitumen of VG-10) @5Kg/10 sqm complete all as specified and directed.

M&L for Bituminous premixed carpet (prepared at site with asphalt mixture machine), 30mm consolidated thickness, laid by manually with 0.405 cu.m. of stone chippings mixed with 21.90 kg of binder (using paving bitumen VG-30), rolled and compacted with 8 to 10 tonne static roller to required camber and gradient complete all as specified and directed.

M&Lfor liquid seal coat, applying evenly binder (using paving bitumen of VG-10) @ 9.8 kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09 cum per 10 sqm and rolled to a uniform smooth surface with 8 to10 tonne static roller complete all as specified and as directed

M&L for painting Lines, Dashes, Arroes etc by applying 2mm thick averaging thermoplastic road marking paint of white/yellow of approved make and shade for road marking, exceeding 10cm width on bituminous roads / pavements or on cement concrete surface using HOT PROCESSOR PLANT complete all as specified and directed / as per manufacturer instruction. (Note : ROAD MARKING SHALL BE MADE WITH MECHANICAL EQUIPMENT ONLY)

S&F Cat eyes retro reflectiv both side road stud ABS boarding conforming ISD671977 having load capacity 40 tone impect resistance of size 90-100mm x 17.20mm thick with resin complete all as specified and directed by engineer-in-charge

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size straight or curved on plain exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwiese provided for including gates complete all as sepcfied and directed.

S&F framed work such as gates, including pintle hinges, stops, hand - made sliding bolts etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

SUMAN CONSTRUCTION

M/S. CONCO CONSTRUCTION