REPAIR REPLACEMENT OF FLOORING TILING AND CONNECTED WORKS IN OTM AREA AT AF STATION GWALIOR AND REPAIR CLEANING OF SEWAGE LINE MANHOLES DRAIN CONNECTED WORK IN SMQ AREA AT AF STATION GWALIOR

Amount

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed by the Engineer-in-charge.

All as per Srl item No 1 hereinbefore but exc 15 cm thickness above ground level complete all as directed

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as directed.

M&L for premium quality non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in Cement Morter (1:6 )complete all as specified.

M&L for premium quality glazed ceramic tile of size 450x300x6-7 mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in Cement Morter 1:3 on wall/ vertical surface complete all as specified.

M&L for vitrified ceramic coloured tiles (light shade) 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1 :6 complete all as specified.

All as per sl item No 6 hereinbefore but, on vertical surfaces over and including 10 mm thick rendering in Cement Mortar 1:3 complete all as specified.

M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm after cleaning the surface and washing down the conc surface complete all as specified.

M&L, for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm gradred stone aggregate as in levelling course finished even an fair. Complete all as specfied.

M&L for Granite 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm screed bed in Cement Mortar 1:4 all as specified.

S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia with supports including fixing arrangement to wall on coloured powder coated aluminum decorative type desinge and pattern approved by GE including decorative brackets both ends complete all as specified.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.

S&F in repairs vitreous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as spd and directed.

S&F seat cover for Vitreous china, pedestal pattern water closet, Black in coulour with falt bottom including mild steel CP hinges complete all as specified.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified.

Taking down old cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as directed.

M&L for 15mm thick cement plaster on conc surfaces/ plastered surfaces in cement mortar 1:3 finished even and smooth without using extra cement mix with water proofing compound as per manufacturers instructions complete all as specified . (Note : WPC will be measured and paid separately under relevant item)

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall mixing with WPC as per manufacturers instructions finished fair & even complete all as specified.

M & L for 5 mm thick rendering in Cement Mortar 1:4 on concrete surfaces as on ceiling finished even and smooth without using extra cement complete all as specified.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as directed.

All as per Srl item No 23 hereinbefore but 20mm bore complete all as directed

All as per Srl item No 23 hereinbefore but 25mm bore complete all as directed

All as per Srl item No 23 hereinbefore but 40mm bore complete all as directed

Re-fixing of old serviceable steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as directed.

All as per Srl item No 27 hereinbefore but 20mm bore GI tubing complete all as specified.

All as per Srl item No 27 hereinbefore but 25mm bore GI tubing complete all as specified.

All as per Srl item No 27 hereinbefore but 40mm bore GI tubing complete all as specified.

S&F for GI tubing 15mm dia bore medium grade with and including all fittings ISI Marked and fixed to wall, floor and ceiling etc complete all as specified.

All as per Srl item No 31 hereinbefore but 20mm bore GI tubing complete all as specified.

All as per Srl item No 31 hereinbefore but 25mm bore GI tubing complete all as specified.

All as per Srl item No 31 hereinbefore but 40mm bore GI tubing complete all as specified.

S&Ffor GI tubing 25 mm bore light grade as in short lengths for spout pipes in sunken floors complete all as specified.

S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified.

S & F in repair 15 mm dia fancy type angle/stop cock, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified.

S & F in repair 15 mm dia, Bib taps, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified.

S&F in repairs 15mm bore PVC connections of PTMT of 450mm long. complete all as specified and directed

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified.

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specificcation & drawing complete all as specified.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads incl hacking out old broken glass pane of any thickness and size complete all as specified .

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified .

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each and remove materials from site of work complete all as directed.

All as per srl item No 46 hereinbefore but exceeding 1.5 sqm and not exceeding 4 sqm complete all as directed.

Taking down ventilators of size not exe 1.5 Sqm each and remove materials from site of work complete all as directed.

S&F for 100mm long butt hinge extruded aluminium alloy with galvanised mild steel hingepin, anodised and fixed, complete all as specified.

S&F for 150 mm long aluminum anodized barrel tower bolts of extruded section & fixed . Complete all as specified.

S&F for 150 mm long aluminum handle cast type anodized . Complete all as specified.

S & F for 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane complete all as specified.

Taking down old cement plaster from conc surfaces incld APP mambrane complete all as specified and directed.

M&L for 10 mm thick screed bed on fair face of PCC padding in cement mortar 1:3 finished even and fair complete all as specified.

M&L for cutting out cracks to V section in existing roofs or terracing, clening out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

M&L for applying a coat of cold applied bituminius primer over cleaned surface @ 0.30 Ltr per sqm and one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over bituminius primer then followed by APP modified five layer polymeric mambrane 3 mm thick minimum weight 3.5 Kg per Sqm reinfored with polyster non woven fabric (weighting not less than 150 Gm per Sqm) manufactured by M/S STP LTD or its equivelant or IWL laid as per the maufacturer's instruction with side over lap of 75 mm and end over lap of 100 mm and applying one coat of polymericcc modified bitumen 85/25 @ 1.20 Kg per Sqm finally finished with two coats of aluminium paint @ 0.20 Ltr per Sqm for each coat complete all as specified.

Taking down chowkhats with shutters of any description and refixing the same in in the opening of same size after carrying out necessary repair work complete all as specified and directed.

Supply only liquid water proofing compound.

S&F in repairs vitreous china urinals half stall incld providing and fixing plugs, bedding urinal against wall in Cement Mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinals complete all as specified.

M&F for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 kg/ Sqm including cleaning the surface complete all as specified.

M&L, for cement concrete 1:7:12 using 40mm graded brick agregate as in filling, ass conc and foundations. complete all as specified.

Taking down eaves gutters and rain water pipes of any size/ pattern with all the fittings and remove materials from site of work complete all as directed.

S&F 110 mm bore PVC (SWR) pipes ISI marked single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches complete all as specified.

All as per Srl item No 64 hereinbefore but fixed along walls complete all as specified.

S&F for PVC (SWR) 110 mm bore floor trap with grating including jointing with solvent cement complete all as specified.

S&F for100 mm bore PVC (SWR) bend ISI marked and fixed in position with adhesive complete all as speciefied.

S&F for 110 mm bore PVC (SWR) branch piece ISI marked double and fixed with adhesive complete all as speciefied.

S&F for 110 mm bore PVC (SWR) single T ISI marked and fixed with adhesive complete all as speciefied.

S&F for PVC (SWR) 110 mm bore vent cowl complete all as speciefied.

Demolition of cement concrete of any description and if any position not otherwise specifically provided for and removing the dismantled material to a distance upto 2.50 KM and depositing where directed by the Engineer -in-Charge.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6M mean radius built in Cement Mortar 1:6 complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb/ benching/ coping, bed plates, for fixing of hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Demolition of brick tiles or terrace tiles including screed bed single layer on roof etc complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (20 mm graded stone agg) as in roof padding concrete, levelling course to maintain true roof slope, surface finish even and smooth with using extra cement complete all as specified and directed.

M&L for water proofing treatment with APP based polymeric membrane, 3mm thick (minimum), weighting 3.5 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over and including applying one coat of hot blown bitumin grade 85/25 confirming to IS-702 @ 1.2 kg per Sqm over a coat of bituminous primer @ 0.3 litre per sqm surface, application of APP modified membrane joint shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction complete all as specified and directed.

M&L for laying 40 mm thick brick tiles over and including 15 mm thick screed in CM (1:4). The cement mortar screed shall be fixed with liquid water proofing additive as per manufacturer's instructions and tile joints shall be filled with cement mortar 1:3 mixed with 5% crude oil complete all as specified and directed. Note: WPC (liquid type) shall be measured and paid separately as supply only.

All as per srl item No 77 hereinbefore but except tiles laid flat and bedded in any mortar complete all as directed.

Raking out joints of terrace tiles laid flat and bedded in any mortar complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 to bricks laid flat or brick tiles in paving etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of 1000 litres capacity of tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of 500 litres capacity of tank complete all as specified and as directed.

Disconnecting and dismantling of water storage tank and removing from the site of capacity exc 250 litres but not exc 500 litres of tank complete all as specified and as directed.

Disconnecting and dismantling of water storage tank and removing from the site of capacity exc 500 litres but not exc 1000 litres of tank complete all as specified and as directed.

Disconnecting existing water storage tank, setting aside (or lowering if required) for repair including cleaning of tank with making it disinfected and hoisting, reconnecting/refixing the same of capacity exc 250 litres but not exc 500 litres of tank complete all as specified and as directed.

Disconnecting existing water storage tank, setting aside (or lowering if required) for repair including cleaning of tank with making it disinfected and hoisting, reconnecting/refixing the same of capacity exc 500 litres but not exc 1000 litres of tank complete all as specified and as directed.

S&F in repair gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for 20mm bore complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of size 20mm bore ( minimum weight 210gms) complete all as specified and as directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of size 20mm bore ( minimum weight 210gms) complete all as specified and as directed.

S&F aluminium anodised powder coated windows and ventilators with one or more rebates including necessary joining cleats, glazing clips aluminium sections as approved by GE complete all as specified and directed.

S&F beveled edge best quality looking mirror of size 600x450 mm mounted over 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.

Cleaning of chocked /blocked sewage lines of any bore , of any description by taking out loose sediment sand ,grit, ash, sludge ,rags, fibres or vegetation from the following depth of sewage line by rodding / by mechanical means and well flushing with adequate water including removal of sludge /debris to a distance exc 250 m but nex 500m and buried under ground including making approch to blocked sewagw line by cutting of busses,grass vegitation of any type required at site etc complete all as as specified and as directed by Engineer-in-Charge.

(a) Upto 1.00 M depth

(b) Exceeding 1.00 M and n exc 1.5 M depth

(c ) Exceeding 1.5 M and n exc 3.00 M depth

Opening & cleaning of blockage from kitchen /bath traps or WC any pattern by rodding or manually upto and including Ist manhole and making it functional complete all as directed and by Engineer-in-charge

Cleaning of manholes of any size but depth not exc 1.5 M deep mechanically or manually by taking of sludge/any deletrious material from the existing manhole and removing the sludge to a distance beyond 2.00 KM from the habitation in sealed container and depositing the same all as specified and directed by Engineer-in-Charge

All as per item No - 97 hereinbefore but depth of man hole exc. 1.5 mtr and n. exc. 3 mtr deep.

M &L for Punchering existing RCC /SGSW pipe line of any dia and at any places between manholes for cleaning blockage in pipes including necessary exavation , returning , filling in and removal of soil and making good punchered area with Cement Mortar 1:1, including cutting/clearing away grass vegetation , saplings, shrubs ,brushwood ,undergrowth ,roots ,along pipe lines both sides upto a distance 2m complete all specified as directed.

Demolition of brick work built in cement mortar and incl all quoins, arches, pillars segregation serviceable bricks keep them stacking for re-use. Complete all as directed

M&L for brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

All as per Srl No 101 hereinbefore but except bricks. Complete all as directed. (Note : Serviceable bricks shall be obtained from Ser Item No 97 hereinbefore for re-use)

Supply only water proofing compound etc all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in drains and surface channels and finishing compelet all as specified

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends. Complete all as specified. (Note :- Only girth to be measured)

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including replecement of cast iron 100mm P trap and connection to trap and flush pipes etc and lime concrete bedding complete all specified. (CAT Part No 2071 of CERA or other as approved).

M&L for cutting of trees' roots penetrated into manholes /sewage line /trap etc of any girth and at any depth including application of hot bitumen to arrest sprouting and filling up the gap and making good the disturbed portion complete all as specified.

Refixing 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe after monor repairs of internal kit but fixed in repair complete all as directed.

Excavation in trenches in soft/loose soil n exc 1.5 M wide & n exc 1.5 M in depth as in and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.complete all as specified.

Excavation in trenches n exc 1.5 M wide and exc 1.5 M deep but, n exc 3 M deep and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan . Complete all as specified.

Demolition and breaking up 75/110/150/200/250 mm bore drain pipes, soil , waste and pipes etc (RCC/ SWG/CI etc) of any description in trenches or floors, including connections and fittings and remove material from site of work. Complete all as directed.

Returning, filling in including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified.

Removing excavated material to a distance exc 500.00 M but n exc 1.50 Km and depositing where directed at a level n exc 1.50 KM above starting point complete all as specified.

M&L for salt glazed stone ware (SGSW) pipe grade A conforming to IS, laid in trenches and jointed in CM (1:1) for 150mm bore of pipe complete all as specified and directed.

S& F for 200 mm bore reinforced concrete pipes class NP-2 laid and jointed in cement mortar 1:1 with collar laid in trenches complete with collars. Complete all as specified.

S& F for 150 mm bore reinforced concrete pipes class NP-2 laid in trenches and jointed in cement mortar 1:1 with collar Complete all as specified.

M&L for concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete as specified.

(a) 150mm bore

(b) 200mm bore

Demolition of RCC work of any description and in any position and remove materials from site of work. Complete all as directed.

M&L for TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L for TMT bars 10 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L for precast RCC 1:1.5:3 type A 1 as in cover slab for manhole/ drains etc with plane faces complete all as specified. (Note : reinforcement will be measured and paid separately)

Dismantling of CI drain pipes of 50-100mm dia jointed in cement mortar complete all as specified and directed.

S&F 100 mm bore sand cast pipes cast iron soil , waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by the Engineer -in - charge

S&F in repairs 75 mm bore sand cast pipes cast iron soil , waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by the Engineer -in - charge

S&F cast iron bends (any radius) 100 mm bore with oval access door complete all as specified and as directed.

S&F cast iron bends (any radius) 75 mm bore with oval access door complete all as specified and as directed.

S&F cast iron branch pieces , single/Tee (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel 100 mm bore complete all as specified and as specified and directed.

S&F cast iron branch pieces , single/Tee (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel 75 mm bore complete all as specified and as specified and directed.

M&L for cast iron floor traps , with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) with diameter of outlet 75 mm complete all as specified and as specified and directed.

M&L for cast iron nahani traps , with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) with diameter of outlet 75 mm complete all as specified and as specified and directed.

S&F stack clamps for 100mm bore sand cast iron pipe out of 50mm x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 75mm bore sand cast iron pipe out of 50mm x 5mm flat iron and 16mm dia round iron stays including nuts and bolts and securing ends of stays to wall or roof complete all as specified and directed.

S&F cast iron cowl of 110mm bore complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of 75mm bore incluting cutting out wall/concrete and finishing the surface to mathch eith existing complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and remove materials from site of work. Complete all as directed.

Dismantling of old timber scantling 40 Sqm in section and over in any position (unframed) and remove materials from site of work complete all as directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

All as per Srl item No 139 hereinbefore but plain sheet as in ridges. Complete all as specified.

M&L for mild steel as in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. Confirming to grade Fe-410. Complete all as specified.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling framed trusses of any description not exceeding 10 M in span complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B-I (using 20mm graded stone agg) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D 2, (using 40 mm graded stone aggregate) in sub base of flooring,mass filining and foundation complete all as specified.

M & L for Sand filling / stone dust under floors or in foundations including watering and consolidation. Etc coplete all as specified.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand broomed etc complete all as specified. (Note :- Colour and pattern of paver block will be approved by the GE)

All as per item No - 147 hereinbefore but except interlocking paver blocks

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

J.N.R. Engineers and Builders

M/s Kishan Construction Company

GURU KIRTH BUILDERS

Om Electricals

M/S SANTOSH CONSTRUCTION CO

M/S DHARMENFRA SINGH TOMAR