Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC WZ 576 577 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹29.7 L+₹10.8 L (57.2%)Rejected-Finance WZ 109 PLOT NO 327 CHAND NAGAR NEW DELHI | L2 | Rejected-Finance Other than Lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
9 Dec 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
GE UTILITY PLANT AND MACHINERY KIRBY PLACE DELHI CANTT-10
REPAIR AND REPLACEMENT OF DEFECTIVE SPARE OF FUME SUCTION PLANT DIESEL TANK SYSTEM AND AIR EXHAUST PLANT LOCATED AT 505 ABW UNDER GE(U) PM DELHI CANTT-10
2024_MES_683360_1
GE(U)/PM/D-46/2024-25
Open Tender
Miscellaneous Works
Item Rate
180 days
DELHI CANTT-10
MES contractor enlisted under class D cat c(iii) having deposited standing security of Rs 100000 with department. Contractor not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class
6 documents required · 6 mandatory
₹500
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
₹70,000
Yes
31 Jan 2025
12 Nov 2024
11 Dec 2024
12 Nov 2024
9 Dec 2024
26 Nov 2024
Amount
Isolate/de-energize the supply to the LT Panel Board of capacity ranging from 100 Amps to 400 Amps and voltage 415 Volts/230 Volts, opening the doors/covers of the cubicle enclosure for carrying out the servicing/maintenance/repairs of the Panel Board,modification and switch gear,MCCB, metering etc and re-fixing the same/New in place after repairs including testing and commissioning of the panel board comprising of the following:- a) Cleaning the inside switch gear chambers for removing dust, carbon and rusted surfaces including cleaning with blower . b) Check the condition of the DMC/SMC support insulators including cleaning applying Dr beck red for better IR values and replacement of insulators if required. c) Tightening up of all bus bar connections, cable connections, replace bolt, nuts wherever required. Note : Spares will be measured and paid separately.
Taking down complete and supply & fixing in replacement of centrifugal air blower with motor of capacity 5 HP, 3P,415 Volt including complete fitting with existing suction / delivery duct necessary retrofit as per site requirement complete all as specified and directed. Make :- Kirloskar/ Crompton /GEC
Supply and replacement of foot valve heavy duty of size 50mm complete all as specified and directed. Make :- Zoloto/Kirloskar/ Leader/ AUDCO
Supply and replacement of AC induction tubular heater 9 KW, 415 volts, 3 phase of length 1.5 m length or as per sample with MS powder coated terminal cover as per sample complete all as specified and directed. Make :- Telelec/Escort/USGC/Theeta
Supply and replacement of mild steel medium grade pipe of size 250mm dia , 5.0 mm thick, both end flange type , round shape including Nut bolts, bend , Tee, reducer ,flange, welding work & retrofit work complete all as specified and directed. Make :- Jindal/Tata/JSW
Taking down complete and Supply , installation, commissoing , testing in replacement of centrifugal monoblock Stainless Steel Pump set of capacity 3.0 HP,2700 RPM, 3 Phase 415 Volt with IP-44 protection including mounting ,foundation complete all as specified and directed. Make :- Kirloskar /Crompton / Beacon/ KSS
Supply and replacement of Pneumatic Solenoid valve 50 NB with Air Pipe & Pipe connected accessories and complete with electrical wiring upto control panel complete all as specified and directed. Make-Rotex/Trident/Aira (Model ECF50)
Material & Labour for taking out motor capacity of 15 HP ,1400 RPM alongwith blower set and rewinding of electric motor squirrel cage induction 15 HP, 1400 RPM, 415 Volts 3 Phase, 50 Hz with super enamelled copper wire of superior quality as per existing guage including varnishing, insulating material including reassembling fixing with blower and suction & dischage duct in position making connection testing and commissioning & complete all as specified and directed.
Supply and replacement of DOL starter Three Phase 415 volt suitable for 5.0 HP pump set complete all as specified and directed. Make:- L&T/Schneider/Siemens/Havells
Material & Labour for PCC1:3:6 typeC-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for burried in ground complete all as specified and directed.
Supply and replacement of Gun metal Gate valve heavy duty of size 80mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and directed. (Make : Zoloto/Kirloskar/ Leader/ AUDCO/Sant )
Supply and replacement of Gun metal Gate valve heavy duty of size 50mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and directed. (Make : Zoloto/Kirloskar/ Leader/ AUDCO/Sant)
Supply laying in replacement of CPVC pipes size of 50 mm dia, SDR 11 & plain SDR -11 fitting fixed to wall/ceiling or in floor etc, including all fitting i.e bend, tee,coupler,flange,end cap etc complete all as specifed and directed Make- Prince/Supreme/ Ashirwad/ finolex / Plasto/Prayag
Supply laying in replacement of CPVC pipes size of 25 mm dia, SDR 11 & plain SDR -11 fitting fixed to wall/ceiling or in floor etc, including all fitting i.e bend, tee,coupler,flange,end cap etc complete all as specifed and directed Make- Prince/Supreme/ Ashirwad/ finolex / Plasto/Prayag
Supply and replacement of CPVC Ball Valve size of 50MM dia complete all as specified and directed. Make- Prince/Supreme/ Ashirwad/ finolex / Plasto/Prayag
Supply and replacement of CPVC Long handle Ball Valve size of 25 MM dia complete all as specified and directed. Make- Prince/Supreme/ Ashirwad/ finolex / Plasto/Prayag
Supply and replacement of CPVC Non Return Valve size of 50 MM dia complete all as specified and directed. Make :- Prince/Supreme/ Ashirwad/ finolex / Plasto/Prayag
Supply and fixing in replacement of 3 layer PVC water Tank capacity of 500 Ltr complete all as specifed and directed. Make- Sintex/Plasto/prince/Supreme
Supply and fixing PP FRP duct pipe size of 250 mm dia complete all as specified and directed.
Supplying, Laying ,and fixing in replacement of XLPE insulated armoured heavy duty electric cable of size 70 Sqmm 3.5 Core ,1100 Volts grade , with stranded aluminium conductor served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,making good the damaged surfaces etc complete all as specified and as directed. Make - Polycab/Finolex/ Fort Gloster/KEI/Havells
Supplying, Laying ,and fixing in replacement of XLPE insulated armoured heavy duty electric cable of size 50 Sqmm 3.5 Core ,1100 Volts grade , with stranded aluminium conductor served with aninner sheathing of PVC tape armoured with GI wire and over all PVC sheathed in laid trenches/ passing through pipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware,clamps,making good the damaged surfaces etc complete all as specified and as directed. Make - Polycab/Finolex/ Fort Gloster/KEI/Havells
All as above but 35 sq mm 3.5 core complete all as directed
All as above but 25 sq mm 3.5 core complete all as directed
All as above but 16 sq mm 4 core complete all as directed
All as above but 10 sq mm 4 core complete all as directed
All as above but 6 sq mm 4 core complete all as directed
Material & Labour for bringing Cable testing van (Fault Finder) for detecting the location of fault in the LT UG cable 1.1 KV of any size complete all as specified and as directed
Material & Labour in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 16 to 35 Sqmm three core copper cable including all accessories required. [Make :- Denson/M Seal/Siemens.]
Material & Labour in replacement for heat shrinkable Straight through jointing kit for LT 1.1 KV XLPE cables 50 to 95 Sqmm three core copper cable including all accessories required. [Make :- Denson/M Seal/Siemens.]
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 m in depth for foundation and getting out in Soft /Loose Soil
Returning filling in incluiding spreading levelling watering and well ramming in layers n.exc 25 mm
Removing excavated material not exceeding 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point
Supply and laying un-reinforced precast concrete cable cover Class LV type-I, flat size 250mm X 150mm X 40mm in trenches for cable protection ,embossed with ELECTRIC on the top surface complete all as specified and directed. Make:- Mehtab Tile/PearessIndustries/Hindmozaic Gujrat /JJConcrete Lucknow
Material and labour for black top Road cutting size of Width 0.45M, Depth 0.6 Length-7.0 M for laying the pipe for cable protection including excavation,returning filling and disposal of the soil complete and including make a good as before with black Top Road complete all as specified.
Supply and laying of GI pipe Light grade size of 50mm dia for cable protection and laid in trenches complete all as specified and directed. Make:-Jindal/Tata /Oswal
Supply and laying Flood Light LED 200 watt inclding taking down old unserviceable fitting Make Wipro/Halonix/Surya
Supply and laying Power contactor MNX-140 220/110 volts with 2NO+2NC Make- L&T/BCH/Seimens
Supply and laying Power contactor MNX-110 220/110 volts with 2NO+2NC10 Make- L&T/BCH/Seimens
Supply and fixing MCCB FP 250 Amp, 35 KA, 415 Volts inclding taking down old unserviceable. Make- L&T/ Legrand/ Indo -Asian/Schneider/ havells
Supply and laying MCCB FP 160 Amp, 25 KA, 415 Volts inclding taking down old unserviceable. Make- L&T/ Legrand/ Indo -Asian/Schneider/ havells
Supply and replacement of Gun metal Gate valve heavy duty of size 50mm with iron wheel head,screwed both end for galvanised pipe line complete all as specified and directed. Make : Zoloto/Kirloskar/ Leader/ AUDCO/Sant
Supply and replacement of mild steel medium grade pipe of size 100mm dia , 5.0 mm thick, both end flange type , round shape including Nut bolts, bend , Tee, reducer ,flange, welding work & retrofit work complete all as specified and directed. Make- Jindal/Tata/JSW
Suman Uni Controllers (BID ID -3177537)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .