Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹33.2 L+₹61,286.99 (1.88%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L2 | Rejected-Finance OTHER THAN L1 RATE | |
| 3 | L3₹33.9 L+₹1.3 L (3.99%)Rejected-Finance HOUSE NO 54 PUBERUN PATH HATIGAON GUWAHATI 781038 KAMRUP M ASSAM | KAMRUP METRO | ASSAM | 781038 | L3 | Rejected-Finance OTHER THAN L1 RATE |
Tender Value
₹33.9 L
EMD Value
₹67,800
Closing Date
22 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIR TO BLDG NO.T-1 AND PROVN OF STORE ROOM AND PARKING SHED AT LEKHAPANI UNDER GE LEKHAPANI
2024_MES_647037_1
8780/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class D and category a (i)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹67,800
Yes
3 Jun 2024
19 Mar 2024
26 Apr 2024
19 Mar 2024
22 Apr 2024
2 Apr 2024
Amount
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
Dismantling timber scantlings in unframed timber work 40 sq.cm and over in section, in any position complete all as specified and as directed.
Dismantling timber fillets, rails, posts, rafters, purlins, etc in unframed work under 40 Sq.cm in section in any posotion complete all as specified & directed.
Taking down roof trusses, coupled rafters or trussed beams of clear span above 4 mtrs and upto 8 mtrs complete all as specified and as directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including frames and cover fillets complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for wind ties
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each and making good to disturbed surfaces complete all as specified and directed by the Engineer-in-Charge.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as directed.
Demolition of unreinforced cement Concrete floor Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.
M&L for brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:6 as in walls complete as specified and directed.
M&L for brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.
M & L for 2nd class hard wood scantling , clean swan, timber fixed as in unframed work completev all specified and directed.
S&F 2nd class hard wood as in plain , solid, straight chowkats and frames ,wought ,framed rebated on the solid,round or chamfered put togather with glue pinned at joints.
S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified & directed.
S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified & directed.
S&F MS butt hinges,medium weight, cold rolled 125mm long complete all as directed.
S&F MS butt hinges,medium weight, cold rolled 50mm long complete all as directed.
Supply only 2nd Class hard wood small fittings such as brackets of any type ,latch and hinge blocks,shaped door and window stops and like ,including all necessary labours,articles n exc 200Cu.cm each
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed.
S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.
S&F 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.
S&F 375mm long Mild steel ordinary rat tail rod pattern springs for door including roller and roller plate complete all as specified and directed.
S&F galvanised steel wire netting 1.4 mm dia and 12mm size of mesh for lathing, fixed with tinned of wire staples to wooden frame including all laps ,cutting and waste complete all as specified & directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces in two layers 5mm thick finishing layer over 10mm thick backing layer finished fair and even with mixing water proofing compound to top layer as per manufacturers instruction and as directed (WPC will be measured separetely).
Supply only Integral water proofing compound of approval brand complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for rendering 10.mm thick plaster in cm 1:6 on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.
M&L for preparation of new plastered surfaces of wall and preparing surfaces as directed by applying thin layer of wall care putty of 1 to 2 mm thick and finally applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed.
S&F steel work in tubular trusses using hollow , rectangular or square section incld special shaped washers as in purlins, rafters columns etc complete using ERW or HRW induction butt welded tubes conforming to IS 4923 (Yst -310) or 1161-1971 gradeSt-240 complete all as directed.
Supply & Fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment cofirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, longbut length of bolt exc 5cm but n exc 10cm long
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
S&F MS works as in bands,straps, supports,hold fasts, wall and wind ties etc conforming to Fe-290 Gde-E-165 complete all as directed.
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from purlins or truss member using 2 to 3 mm dia GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed
M & L for 4 mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation ad acoustic purpose to be placed in grid system hold down clips with provision of high fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc, complete all as per manufacturer instructions
S & F for aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified
S & F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief
S & F Aluminium powder coated door shutter single / double leaf, side huge type on floor door spring (to be paid sepratly), 44.45 mm wide (two panels) fabricated having hanging and meeting style 85.00 mm X 44.45 mm x 3mm thick , top rail 83.50 mmx44.45mmx 3 mm thick, middle rail 150 mm x 44.45 mm x 2.65 mm thick and bottom rail 150 mm x 44.45 mm x 2.20 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fittings such as pair of ‘D’ type handle 250 mm long (decorative type), tower bolts 150mm long 1 Nos for each leaf, aluminum beading, PVC packing, locking arrangement with mort ice lock 6 lever and necessary fittings & fixtures complete all as specified and directed by Engineer – in - Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises.
M&L for vetrified ceramic tiles of 10mm thick (squired/rectangular) polished, area of each tile not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for vetrified joint free non skid ceramic tiles of 10mm thick (squired/rectangular) polished, area of each tile not exceeding 0.36 Sqm in on vertical surfaces such as skirting , dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.
M&L for glazed ceramic coloured joint free tiles of 7mm thick on vertical surfaces such as skirtins, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.
M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified & directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new painted surfaces of steel of any description, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.
Dismantling water storage tanks exc 250 & n exc 500 Ltrs capacity and removing from site complete all as directed
Taking up or down GI tubing 15mm bore and connections including cleaning for refixing or removal to store complete all as directed
Taking up or down GI tubing 20mm bore and connections including cleaning for refixing or removal to store
Taking up or down GI tubing 25mm bore and connections including cleaning for refixing or removal to store complete all as directed
S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted I position all as specified in SSR Part-I. complete all as directed
S & F 25mm bore GI pipe medium grade with all fittings complete to wall and ceiling or laid in floors / trenches / under road complete all as directed
S & F 20 mm bore GI pipe medium grade with all fittings complete to wall and ceiling or laid in floors complete all as directed
S & F 15 mm bore GI pipe medium grade with all fittings complete to wall and ceiling or laid in floors complete all as directed
S & F 25mm gun metal, globe or gate valves with iron wheel head, screwed both end for iron pipe complete all as directed
S & F 20mm gun metal, globe or gate valves with iron wheel head, screwed both end for iron pipe complete all as directed
S & F 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as directed
S&F in repair, Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified & directed.
S & F 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as directed
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
S&F soap dish of stainless steel fixed to wall with chromium plated brass screws fixed in repair complete all as specified & directed.
S& F in repair wash down water colset(Padestal pattern) including plastic seat, back closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device , PVC flushing cistern of 10 Ltrs capacity , low level , white with inlet,ball valve, float and handle bracket, PVC flush pipe 32mm dia, bolt etc complete all as specified and directed.
S & F health faucet mild steel chromium plated suitable for 15mm dia pipe witrh 1.50m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified.
S & F brass Chromium plated shower roses 125mm with or without swivel joints complete all as directed.
S& F toilet paper holder of brass chromium plated fixed to wall with chromium plated brass screws complete all as directed.
S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.
S& F brass chromium plated tubular towel rail 20mm dia wth brackets complete all as specified and directed.
S & F harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. complete all as directed.
S & F 15mm bore chromium plated half turn Basin Mixer as fixed in repair complete all as specified and directed
S & F 15mm bore chromium plated single lever range wall mixer non telephonic as in repair complete all as specified and directed.
S & F 15mm bore chromium plated two in one angle cock with wall flange complete all as specified and directed.
S & F 15mm bore chromium plated two in one bib cock with wall flange complete all as specified and directed
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
S&F PVC (SWR) vent pipe of 75mm dia any length with or without ears, fixed to walls with cement joints all as specified and directed.
S&F PVC (SWR) bends 110mm dia any radius as in repair all as specified and directed.
S & F 75mm dia PVC (SWR) floor trap, plain with grating including jionting with solvent cement.
Surface Excavation not exceeding 30cm deepand averaging 15cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out soft loose soil complete all as specified and directed by Engr-in-Charge.
M&L for Anti Termite treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square meter of surface area.
M&L for Anti Termite treating the backfilling in contact with foundation at the rate of 7.5 liters of emulsion per square meter of vertical surface (Area of the sub structure uin contact with backfill to be measured)
M&L for Anti Termite treating the top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface.
M&L for Anti Termite treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface.
M&L for Anti Termite treating the soil along with external perimeter of building at the rate of 2.25 liters of emulsion per meter of the perimeter wall .
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft soil, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,
M & L for PCC 1:2;4 , Type B2 (using 40mm aggregate) as in foundations,filling and mass concrete complete all as dirceted.
Material & Labour for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) in foundations, filling, mass concrete etc complete all as specified and directed.
M&L RCC M-25 design mix (using 20mm graded aggregate) as in foundation, footings, plinth beam and similar RCC works all as specified and directed.
All as per item No 99.00 above but as in beam/lintel complete all as directed.
M&L for formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per Item No 103.00 above, but 6 to 8mm dia complete all as specified and as directed.
Material & Labour for 75 mm thick Plain cement concrete ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
Material & Labour for 25 mm thick Plain cement concrete ( 1:2:4 ), type B-0 (using 12.5 mm graded stone aggregate), as in sub base floor all as specified and as directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over and including 20mm thick cement screed bed in CM 1:4
M&L For Hardcore of Gauge n.exc 63mm, deposited,spread and levelled in layers n.exc 15cm thk , watered and rammed to a true surface complete all as directed.
S&F For placing glass dividing strips, 3mm thick , 38 mm wide as in grid for flooring complete all as dircted.
M&L for proving PCC 1:2:4 type B1 (20 mm graded aggregate) for coping complete all as directed.
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed.
S&F Pressed steel frames of size (125 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.
M&L for type BO, 1:2:4 (12.5 mm graded aggregate) cement concrete as in back fill for pressed steel frames complete all as specified and directed.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.
S&F MS butt hinges 100mm long, medium weight, rolled mild steel, and fixed.
S&F floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed in door.
M&L for sand filling under floors or in foundations including watering and consolidation.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigments over 25mm thick layer of sand and filling the joints with same. The rates for floors laid dry but pointed in mortar also include for laying on and including 25mm thick layeer of sand and filling of joints with same. complete all as specified and directed.
Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed.
M&L for Point wiring complete as specified with 1100 volt grade 1.5 sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC casing and capping of suitable size but not less than 20mm , with all fittings, fixed on wall/ceiling /floor including modular box suitable for housing modular pattern switches/ sockets/ regulators etc. and duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified & directed for :- (a) One light /Fan /Ex Fan point controlled by one, one way switch (b) One Bell/Buzzer point controlled by one way bell switch (c) One socket outlet 3 or 5 Pin, 6 Amp on same board. (d) One socket outlet 3 or 5 Pin, 6 Amp on independent board
All as per Ser item No 122.00 above but with using 2.5 sqmm copper cable in and including PVC casing and capping complete all as specified and as directed for socket outlet 3 or 6 pin 15 Amps.
S&F modular switch 6 Amp one way 1 module 230 V AC complete all as specified and directed.
S&F modular bell push, 6 Amps, 1 module single pole complete all as specified and directed.
S&F modular switch 16 Amp one way 1 module 230 V AC complete all as specified and directed.
S&F modular socket outlet 6 Amp 2 module intel multi socket for all pins 230 V AC complete all as specified and directed.
S&F modular socket outlet 16 Amp 2 module and 6/16 Amp heavy duty 230 V AC complete all as specified and directed.
S&F modular ceiling fan regulator, electronic step type, 5 speed AC 230 volts, 2 module complete all as specified and directed.
S&F 2 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F 3 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F 4 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F 6 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F 8 module Metal Flush Box including white cover plate with frame for fixing of modular switeches/sockets etc. complete all as specified and directed by Engineer-in-charge.
S&F call bell multi music type AC 230 Volts single pole complete all as specified and directed.
S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.
S&F LED Tube lights fitting 1 x 18/20 Watt, 4 feet ,220V AC decorative box type with driver, holder including fitting fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of suitable size and making necessary connection complete all as specified and directed.
S&F LED Tube lights fitting 1 x 9/10 Watt, 2 feet , 220V AC decorative box type with driver, holder including fitting fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of suitable size including taking down old unsv tube light fitting and making necessary connection complete all as specified and directed.
S&F Aesthetically designed recessed mounted panel 1x1 Feet LED light 18/24 Watt flat round/square type for surface/ceiling mounting which provides soft-light and glare free symmetrical illumination as fixed in repairs including taking down old unsv light fitting all as specified and directed.
S&F LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection incl mounting bracket of suitable size and connection complete all as specified and directed.
Taking down carefully old unserviceable ceiling fans / Exhaust fans complete, removing its blade and deposit to the MES Store yard by the contactor.
Over hauling of ceiling fan of any sweep/ make i.e. opening of fan and cleaning ball bearing, filling grease/ oil and changing of u/s cotter pin, nut, screw, check nuts and bolts as required incl. cleaning of body, blades, down rods, canopies etc and re-assembling and painting complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as directed.
Hanging only ceiling fan any make /sweep and connecting up with existing electric circuit complete received from MES Store Yard all as specified and directed.
S&F ceiling fans 1200 mm sweep, AC 230 V complete with blades, down rods and connected accessories, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with (BLDC) brushless direct current motor and connection complete all as specified and directed.
S&F Exhaust fans made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and making good with matching colour with the surroundings provision of cable 3 core of of suitable size from ceiling rose to fan complete all as specified and as directed.
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps , 240 Volts complete all as specified and as directed.
M&L for providing concealed submain wiring with two single core 6.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC Conduit complete as per direction including 6.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one & cutting chases in walls by cutter and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note :- (i) Three runs of single core 6.00 Sqmm multi stranded copper cable and one run of PVC conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the conduit.
M&L for providing concealed sub main wiring with two single core 4.00 Sqmm (nominal area) PVC Insulated FRLSH unsheathed multi stranded copper conductor cable 1100 volts grade drawing through PVC Conduit as per direction complete including 4.00 Sqmm PVC insulated unsheathed multi stranded FRLSH single core copper conductor cable for earth wire including taking down/removing old one & cutting chases in walls by cutter and making good distrubed surfaces of walls, floors, etc complete all as specified and directed. Note :- (i) Three runs of single core 4.00 Sqmm multi stranded copper cable and one run of PVC conduit shall be measured as one run length (ii) Extra length of cable required for connection to DBs/MCBs shall deem to be included in unit rate quoted by contractor against the item (iii) Earth wire run inside the conduit.
Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated copper bus bar 240 Volts 8 way (2 + 6 way) single pole and neutral link, incl taking down old u/s any type, complete all as specified and as directed.
S&F MCB single pole and neutral (SP&N) 40 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable, complete all as specified and directed.
S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'C' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.
Taking down carefully Geyser 25 ltr cap and refixing the same after ompletion of work as per direction with all connected accessories complete, removing its blade and deposit to the MES Store yard by the contactor.
Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet panel of size 1000 mm x 900 mm x 200 mm and made out of 2 mm thick CRCA MS sheet of suitable size to operate on 3 phase 4 wire system 415 Volts AC, double door with first door having glass window for viewing KWH meter and other doors shall be opeque and suitable for mounting switch gear, electrical meters including pre wiring from Bus bar to Meter and Meter to MCBs (for pre wiring use 6.00 Sqmm single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCBs) including bottom gland plate with sufficient numbers of circular cable entry holes, complete as per drawing with masonary work for fixing in wall . All door sholud have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint. The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories:- Incoming:- (i) MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics 100% = 01 No (ii) Phase indicating lamp LED type – 1 Set of three. (iii) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code. OutGoing:- (iv) MCB SPN 40Amps, 10KA - 7 Nos. (05Nos for meters, 02 for Spare) (v) Fixing only Single phase electronic meters 05 Nos. (Note:-contractor removing electric meter from existing box for keeping in safe custody and fixing the same in this panel).
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as directed.
M&L for brick protection over cables inside the trench by using common burnt clay building bricks,sub-class"B" laid dry and flat and width wise along the axis of the trench complete all as specified and as directed by Engineer-in-Charge.
M&L for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified and directed by Engr-in-Charge. (Punned thickness shall be considered for payment).
M&L for light grade galvanized pipe ISI marked with all fitting ISI marked, laid in trenches, under road or fixing on wall/pole/ crossing nallah etc of bore 40 mm complete all as specified and as directed .
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed.
ADNEEDS ENTERPRISE
DHIRAJ SAHARIA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .