WBPWD/EE/AED /eNIQ-68/2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed] (Avg. run 5 Mtr.)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (On Board).

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles - (a) 19 mm dia 3 mm thick polythene pipe with out earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Gloster/Finolex/Polycab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3x1.5sq.mm.(for 5Amp.Seperate Plug) .

2x2.5sq.mm. + 1x1.5sq.mm. (for 15Amp. Power Plug).

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC.(for AC points)

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (5A. Separate plug).

Supply & Fixing 240 V, 16/20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (For power point).

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (North West) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

S & F Angular Holder with 9W LED lamp( make: Phillips/CG/Havells).

S/F Double LED Tube Light fittings TMC 501 with Mas LED Tube 18W .(Phillips/havells/Crompton). (With Two Years warrenty)

Supply only New 250v , 65w, A.C sweep Ceiling fan, 1400 mm,with P2 capacitor, Brown (Crompton Greaves/Usha Striker Plus/Havells) with Multi gauge steel wire protection. (With Two Years warrenty)

S & Fixing exhaust fan, in wall and mending good damages and smooth finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia as follows (make: EPC Heavy duty) 12" exhaust Fan

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provisionfor earthing attachment 4 way Legrand with MCB as per GS.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+8 way(Make-ABB/L&T/Legrand).

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. 4 way.

Supplying and fixing 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(MakeLegrand/Siemens/Schneider) a)6-32 A SP MCB

b) 63 A T.P.MCB (Make-Legrand/Siemens/Schneider)

c) 40 A D.P.MCB (Make-Legrand/Siemens/Schneider)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board..

Supplying and fixing 415V,100 A, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars 415V,315A . Cu -bars

Supply 1.1 kv grade4 Core 6Sqmm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as to GS.(From Source to Sub panel)

a) Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supply 1.1 kv grade4 Core 50Sqmm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as to GS.(From Source to Sub panel)(Analysis enclosed)

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Supply 1.1 kv grade4 Core 16Sqmm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor (HAVELLS/POLYCAB/ GLOSTER/R R KABEL/Mescab) in following manner as to GS.(From Source to Sub panel)

a) Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below) : 4 core 6 sq mm

4 core 16 sq mm

4 core 50 sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials . i) 4 Core 6 sqmm

4 core 16 sq mm

4 core 50 sq mm

Dismantling existing unservicecable electrical installation incl. Mending good damages and clear the site.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages by No. 8 SWG wire.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required..

S & F of 400 X 300 X 100 mm sheet steel enclosure with door system by 16 SWG M S sheet enclosure on angle iron frame on wall comprising of the following accessories incl interconnection by suitable size cu wire as required:- ( i )40A Single Pole Power contactor with 240V Coil (Mk. L&T, Type MR 13, cat. no.CS94992) -1 No. ( ii )240V, 24 Hr. one dial digital timer (Mk. GIC, Cat No. T2DDT7) - 1 No. ( iii) LED Lamp (Red & Green)(Mk. Siemens)-2 Nos. (iv )40 A SP MCB (Mk. L&T) - 2 No. (v) 40A Toggle switch - 1 No. (vi) 2 way bakelite base terminal block 40 A capacity -- 1 No.

S/F IP 66 SPSL090W 90 W LED( MAGIK Solis Plus/Philips/Crompton / Eq) with complete set as per GS. ( With 5 year Warrenty).

S & Fixing only outdoor/street light LED light fittings complete with all accessories to be fixed/ projected from the wall of the building incl.making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting.(Analysis Enclosed)

Add GST @18% On total from item no 1 to 36.

Add LWC @1% On total from item no 1 to 37.

GENUINE ENGINEERING WORKS (BID ID -5668915)

KOUSHIK MONDAL (BID ID -5667674)