Repair renovation of USIC department Electrical work

Amount

Re-wiring for light point/fan point/call bell point exhaust fan point with 1.5 Sqm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/ PVC conduit including dismantling as required. (Wire Make ISI Marked Havells/Anchor/KEI/Polycab ) (Conduit Make - ISI Marked Anchor/High Power /AKG) Group ‘C’

Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.(Wire Make ISI Marked Havells/Anchor/HPL) 2x1.5 +1x1.5 Sq mm

2x2.5+ 1x2.5 Sq mm

4x6+ 2x6 Sq mm

Supplying and fixing 5 amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make Havells /Anchor/HPL) Single pole

Supply and fixing of metal Box of following size on the surface/recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200mm x 125mm x 60mm deep

-----------------do------------- 100mm x 100mm x 60mm deep

Supply & fixing 15/16 amp piano type switch on the existing switch box or cover including connection as required. (Make: Anchor/Havells /HPL/Sanchi major)

Supply & fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connection as required (Make: Havells/ Anchor/Sanchi major

Supply & fixing 5/6 amp piano type switch on the existing switch box or cover including connection as required (Make :Havells/ Anchor /Sanchi major)

Supply & fixing 3 pin 5/6 amp socket outlet on the existing switch box or cover including connection as required(Make: Havells/ Anchor /Sanchi major/)

Supply & fixing two module stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. as required. (Make Havells/ HPL / Anchor /Sanchi Major)

Supplying and fixing of following ratings and poles 240/415 volts Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required (Make Havells /Legrand /Anchor/ C&S/L&T/ Siemen/IA/HPL/Standard) 63 Amp 240 volt Four Pole Isolator.

Supplying and fixing following ways, single pole and neutral, sheet, MCB distribution board,240V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,power painted including earthing etc. as required (but without MCB/RCCB/Isolator) 6 way, Double Door

Supplying and fixing following ways, horizontal type three pole and neutral, sheet, MCB distribution board, 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,power painted including earthing etc. as required (but without MCB/RCCB/Isolator) 6 way(4+18), Double Door

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required (Wire Make ISI Marked Havells/HPL/Anchor/KEI/Polycab) 1x1.5 sqmm

2x6 sqmm

Supplying and fixing brass batten/Angle holder including connection etc. as required. (Make Havells/ HPL / Anchor / Sanchi Major)

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Anchor /Havells /HPL) 100 AMP 16KA TP MCCB

200 AMP 36KA FPMCCB

400 Amp 50 KA FPMCCB

Supply/Installation testing and commissioning of following type of surface /recessed mounted Indoor Linear/square or round downlighter/wall bracket/bulk head, environmental friendly energy efficient LED Light fittings complete. Make (Halonix/ Havells/ Syska/Bajaj/Greatwhite/ Philips/Crompt-on/compact) 4 feet 18 to 22 watt ,230 volts LED batten type tube light fitting complete

12 To 18 Watt LED recessed/surface mounting 6500 K, 240 Volts as per cat : Slim Panel down light fittings/lumaineres square or round (225x225)mm to (300x300)mm Dimensions.

wall bracket

Supply, installation, testing, commissioning of 1200 mm sweep ceiling fans complete with blades BEE 3 to 5 star rated energy efficient .(Make: Havells /Anchor/Bajaj /Compact)

Supply, installation, testing, commissioning of heavy duty 300 mm sweep BEE 3 to 5 star rated energy efficient exhaust fan. Make: ( Anchor/Havellls/Bajaj/Crompton)

Providing/fixing 40 amp rating , 230 volts SPN MCB in the existing MCB DB or enclose complete with connection testing and commissing complete Job. (Havells/Anchor/HPL make)

Design, manufacture, testing at works & supply, installation, testing & commissioning cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP 42 for indoor and IP54 for outdoor, shall be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/insulated conductors/strips etc. The panel shall be fabricated out of CRCA not less than 2.00 mm thick for the load bearing members and 1.6mm for doors of L.T Panels. The frame work may be Agle Iron/Channel/ Bolted type construction should be arrangement for I/C/O/G. Cable termination with 2 Each. 20x5mm cu. Strip fixed all around the panel connected to 2 Each. earth bars cu-strips connected to incoming earth conductor. (Make Electric Field/ Bharti Engineers/Gupta & Friends/ Jai maa/KED) MAIN OUTDOOR /BUILDING CONTROL PANEL a. INCOMING Space for 1 to 2 No. 200 to 630 Amp TPN Al. Bus bar of equal cross section for Main Power connection to Main MCCB. Space for 3 No. 100 to 630 Amp 4 pole MCCB b. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. c. OUTGOING Space for 2 No. 200 to 630 Amp TPN Al. Bus bar of equal cross section for power load/light load. Dimensions 4’x3’x1’6”

Supply/installation of the following type of outdoor decorative energy efficient LED flood/street light luminaries complete with all accessories connection testing and commissioning as required. Make (Bajaj/Surya /Havells/ C&S/ HPL Anchor/compact/ Halonix) 45 to 60 watt,230 volts IP 66/IP65.

Supply, testing and commissioning of PVC sheathed Aluminum conductor 1100 volts graded PVC AA Armoured/unarmoured XLPE Cable including end termination, crimping, cost of thimbles, nuts bolts, glands, connection, testing and commissioning complete job. (Make: Havells / General/Polycab / Gloster) 2 core 16 sq mm armoured cable

3 ½ core 35 sq mm armoured cable

Supply and fixing of following rating onload I-O-II Four pole with advanced neutral on load change over switch confirms to IS 13947 (Part-3) IEC:609473) (Make I.A/Havells /HPL/Crompton 100 Amp

M/S RAVINDER KUMAR CONTRACTOR

Harjeet Singh

M/s Guru Nanak Electricals