PROVN OF ELECTRIC CONNECTION IN 27 MADRAS GATE NO1 AND 2 POST NO19 AND MAG GUARD DUTY POST AND SPECIAL REPAIR REPLACEMENT OF BER ACS INSTALLED AT VARIOUS UNITS AND EXISTING UNSV LT OH LINES INCLUDING SECURITY LIGHT SYSTEM FROM INF CHOWK TO MISSILE CH

Amount

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

S & F for wall mounted fan, 230 Volts single phase oscillating 400 mm sweep suitable for wall mounting , service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with necessary electrical connections from ceiling rose to fan teriminal complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe light grade) and watering pipe 20mm bore GI pipe (medium grade) and chamber PCC (1:4:8) type D2( using 40mm grade stone aggregate), MS FUNNEL with wire mesh ,coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and RCC (1:2:4) type B1 using 20mm graded stone aggregate, pit cover 50mm thick reinforced with 8 mm MS bar at 80mm c/c both way in lieu of CI pit cover with lifting hook including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. incl taking down old earthing complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire 4mm dia and protected pipe 15 mm dia of same size upto 7.5m shall deemed to be included into quoted rate

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exc. 1.5 mtr deep for laying of cables and getting out soft/loose soil complete all as specified and directed by Engr in Charge.

M & L filling dry and clean sand in trenches for cable 8 cm deep below and 15 cm above for cable cushioning complete all as specified and directed by Engr in Charge.

Supplying and laying un-reinforced precast concrete cable cover, LV low voltage type -I flat size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr-In-charge.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in trenches complete all as specified and directed by Engr in Charge.

Removal of surplus soil obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr in Charge.

Material and labour for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 10 sqmm 2 core size laid in trenches under floor/roads/hard standing along poles etc all as specified and directed by Engr in Charge. (Excavation and earth work, sand cushioning ,brick protection & GI pipe shall be measured and paid for separately).

M & L for GI pipe 40 mm dia Light grade fixing to wall or laying in floors for protection of cable complete all as specified and directed by Engr in Charge.

Dismandling & taking down of existing worn out / unserviceable aluminium conductor, steel reinforced (ACSR) of any description /size & in any position from existing LT pole/ Lines all as specified and directed by Engr - in - Charge.

Dismandling of existing unserviceable cross arms of any description and in any position complete all as specified and directed by Engr - in - Charge.

Dismandling & taking down of existing worn out / unserviceable GI wire of any description /size & in any position from existing LT Lines including cradle guard/ earth continuty wires complete all as specified and directed by Engr - in - Charge.

Dismandling of existing unserviceable Insulators of any description and in any position complete all as specified and directed by Engr - in - Charge.

Dismandling of existing unserviceable concret poles/ struts of any Size and in any position complete all as specified and directed by Engr - in - Charge.

Dismandling of existing unserviceable street light bracket of any Size and in any position complete all as specified and directed by Engr - in - Charge.

M&L dry river sand in trenches for cable cushioning & protection including spreading, ramming all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, LV low voltage type -I flat size 250 mm x 150 mm x 40 mm complete all as specified and directed.

Supply, laying, jointing, testing and commissioning LT XLPE insulated, PVC sheathed armoured heavy duty electric cables LT 1100 volt grades with aluminium stranded conductor passing through pipes, in duct, on poles,in trenches, under road etc complete all as specified and directed of followings sizes :- (a ) 16 sqmm 4 core

Supply, fixing, testing and commissioning in replacement of LED street light fitting 90 watt made up of pressure die cast housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. 10 KV SPD included Efficacy: 110LM/W complete all as specified and directed by Engr-in-Charge.

Supply and fixing 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 3 x 1.5 Sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed by the Engr-in-Charge.

Supply, fixing, installing and commissioning of octagonal Galvanised street light pole 8 mtr long, Top dia 70mm, Bottom dia 130mm, sheet thickness 3mm and base plate dimensions 200x200x16mm, foundation bolts 4x M20 x 600mm, single arm decortive bracket, 1100 volts grade, including cost of nuts and bolts and all accessories as supplied by the manufacturer including cost foundation accessories etc, the foundation bolts as per manufacturer design should be hot dipped galvanised pole complete with door locking arrangement, terminal plate consisting of 1 nos 10 A, 4 pole neutral links including connecting etc with suitable connecting arrangement, cost of RCC 1:1.5:3 for foundation of size 0.7m x0.7m x 1.8m with minimum 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm cement concrete for fixing the pole with labour and material required to complete the job complete all as specified and directed by Engr-in-Charge. Note:- Earth work, foundation, connected bolts and nuts, single arm bracket and connected accessories deemed to be included in the quoted rate. (a) Excavation in post holes in any types of soil, returning filling, well raming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (b) PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in foundation including form work. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work. (d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base. (e) Painting of poles with one coat of primer and two coat weather proof paint including oil enamel paint for strip marking up to 1.5 mtr height in the pole all as specified.

16.M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

Supply and installation, commissioning of wall mounted digital inverter type split AC unit outdoor/indoor complete with cordless remote control unit and with in built irioniser and plasma filter for better indoor air quality for capacity 1.50 TR working with non CFC refrigirent and BEE 5 Star rating complete all as specified.

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stabilizer at 230 volts with accuracy of +/- 2.5% and capacity 5 kVA suitable for AC complete all as specified.

Rameshwar Enterprise (BID ID -3090014)

Hirachand Sunderji and co (BID ID -3089928)

M/s. Vimal Enterprise (BID ID -3086830)

SHRI SAINATH ENGINEERS (BID ID -3089675)

fakhrie apostrical (BID ID -3089831)

ABR Trading Co (BID ID -3089083)