PROVISION OF AIR HANDLING UNIT (AHU) WITH HEPA FILTERS FOR BMT CENTRE IN THE FAMILY WING COMPLEX AT CHAFB

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specifed and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Vitrified Ceramic tiles in dark shade 10mm thick of size 600mm x 600mm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match, complete all as specified and directed.

All as per item No 02 above but as in wall skirting over and including 10mm thick rendering of CM 1:4.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for etc complete all as specified. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for form work to sides of concrete foundations footings bases of columns and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finished surfaces of concrete etc complete all as specified.

M&L for reinforced cement concrete type B0-1:2:4 (12.5mm graded aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified.

M&L for reinforced cement concrete type B0-1:2:4 (12.5mm graded aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses etc complete all as specified.

25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring, complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire annealed not less than 0.9 mm dia all as specified and as directed

S&F Stainless steel tubes making shape, cutting, bending, drilling to wall, floor & welding as in railing, gate etc with all fittings including dismantling existing steel tubes, complete all as specified.

Pre-cast cement concrete solid block masonry, exceeding 10cm in width, blocks cast in PCC 1:3:6, type C1, using 20mm graded stone aggregates, set in cement mortar 1:6, complete all as specified and directed.

Stone masonery walling of squared rubble coursed,well bonded,bedded and solidly hearted, built in cm ( 1:4 )of Bangalore type extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, complete all a sspecified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Injecting cement slurry 1:3 (1 Cement: 3 water) by weight including mixing of grout (Master flow 150 of BASF or equivalent) as per manufacturer specifications, in cracks/ effected RCC work under low pressure up to 0.50 Kg/cm2 through already fixed 12 mm dia PVC nipples complete including drilling, fixing of PVC nipples as per direction of Engineering in Charge

Providing the cracks V groove shape, in the concrete surface, after opening the cracks using suitable tools or saw cut in the crack n.exc 25mm wide and 25mm deep, and cleaning the interior sides of the crack using sharp tools to remove all loose materials, and sealed with using high strength epoxy putty (like Master Brace 2200 or equivalent) mixing with zone II sand

Preparing new plastered on wall and applying three coats of white wash, complete all as specified and directed.

Resin bonded granular textured finished including 2coats of painting wall with plastic emulsion white or tinted, including preparation of new surface of wall, complete all as specified and directed.

Two coats of painting wall with plastic emulsion white or tinted, including preparation of old surface of wall all as specified.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats, complete all as specified and directed.

TRAY PANEL SCREW type system with aluminium composite panel of approved plain colour or wood grain printed on interior walls, columns, MS structure, ceiling, coping, slab projectons at all heights and elevation including necessary aluminium framework. The aluminium composite panel should 4 mm thick consist of 3mm thick thermoplastic core of anti oxidant LDPE sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint including dismanteling exisiting unserviceable boarding any description (wall panelling/cladding/lineing/partition etc) fixed in any position, complete all as specified and directed. NOTE:- The system shall be fitted with necessary Aluminium. sub frames, cleats and shall be fixed to the masonry/ RC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be in Indian standard grade. all joints of ACP must be sealed with approved sealent of approved colour. sealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylene backer rods, weather sealant etc, all materials and labour complete.

16mm thick Fine Fissured RH-99/ OPTRA RH 95 Bevelld tegular Make Armstrong and accoustic purposes of size 600mmx600mmx16/15mm thick fixed with Armstrong SL2/K2C2 frame and suspension ssystem (cat part No - PRELUDE 24) in GI grid powder coated snap gird ceiling frame with suspendor of required length , fixed with dash through fastener bolt of approved quality 04 Nos per sqm including necessary cutting securign and making good to disturbed surface including dismanteling exisiting unserviceable boarding any description (ceiling/lineing etc) fixed in any position, complete all as specified and directed.

Providing and fixing in position suspended false ceiling made out of 12mm (apprx.) thick Gypsum Plaster Boards of Indian Gypsum or equivalent made G.I standard section framework in the pattern as per manufacturer's instruction. The G.I. Section frame work shall be tied to the roof and walls with the anchor fastener screws/bolts of appropriate size recommended by the manufacturer. The boards shall be fixed to the frame work with the screws and the joints shall be flushed and finished with requisite jointing compounds paper tapes etc. Rates includes execution of works in different levels/offsets etc. The surface shall be finished evenly by applying putty, sand papering, applying primer and two coats of plastic emulsion paint evenly including necessary additional ceiling sections and intermediate channels and openings for light fixtures, A.C. ducts, vertical drops, offsets. etc complete

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n. exc. 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 Sqm and n. exc 4.0 Sqm each, complete all as specified & directed.

Taking down Shutters of any description 1 sq. m and n exc 2 sqm each all as speicfied

S&F 32mm thickness interior teak wood flush shutter, polished surface finished with hinged open style including brass mongries premiun quality all as directed by Engr-in Charge.

Powder coated anodised aluminium frame for doors, windows, ventilators, partition/ fixed type windows, aluminium grill etc. with one or more rebates including joining cleat for fixing (minimum thickness of powder coating 50 micron) etc., complete all as specified and directed.

Powder coated anodised aluminium sliding window and ventilator shutters, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed.

Sheet glass, of 4.0mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each, complete all as specified and directed.

Galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed as in repairs, complete all as specified and directed.

12 mm thick ATUL/SAINTGOBIN or equivalent toughned glass with polished edges and etching as per approved pattern without frame including cutting in suitable size fixing for counter top in vertical position or for partition etc, complete all as directed.

Stainless steel handle, base plate, cleats/ clamps, hollow section, etc. of any size and design for fixing glass partition/ doors etc upto 4m height, complete all as specified and directed.

Factory made solid UPVC frame of size 50mm x 47mm made out of 5mm wood grain printed UPVC sheet reinforced with M.S. Square tube, suppling & fixing for partition with provisioning of UPVC shutter or glass, complete all as specified and directed. (Note: shutter and glass to be measured and paid separately)

Factory made solid UPVC moulded shutter, 18 to 20mm thick (stiles), consisting of frame made out of M.S. tubes of grid size n.exc 45x45cm. M.S. frame shall be covered with heat moulded wood grain printed UPVC sheet. Panelling of shutter to be fitted in the UPVC frame with necessary UPVC sheet, beading and joined together with solvent cement/ silicon, complete all as specified and directed.

Vertical blinds on the windows at all heights, all materials and labour etc. with complete accessories in all respects as per directions of Engineer-in-Charge, fixed as in repairs, having following specifications:- Material: Polyester or pvc fabric, Fabric strip width: 100mm, Stylish design, High durability, Weather resistant, Chain operated: The strips can be both rotated in place and also drawn sideways, Top channel: aluminium powder coated, Weight: 250gsm to 300gsm, Colour fastness to light: upto 6-7 grade, Light transmission: 20% to 40% (through the fabric). Material & color shade will be as per sample approved by GE.

Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of CM 1:6, complete all as specified and directed.

Glazed coloured ceramic tiles/digital tiles in vertical surface 450 x 300 x 7mm to 8 mm/ 350x250x7 mm/ 450X 350X 7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with joint free non skid tiles including rendering 10 mm thick cement plaster in CM 1:4 on vertical faces of brick work or concrete surfaces as skirtings, dado etc., complete all as specified and directed.

M&L for chequered cement concret tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with white cement & pigments in floors over 20mm thick screed bed of cement mortar 1:6 all as specified & directed.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring all as specified.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. all as specified.

Sheet glass 4 mm thick ordinary quality, ground or obscured or frosted, on one side and glazing with oil putty in square n.exc 0.5 sqm in each pane etc., complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc., complete all as specified and directed.

UPVC 15mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in florr etc., any type of pipe including taking up or down old unserviceable pipe, complete all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions and fixed, etc., fixed as in repairs, complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required in Brick walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth etc., complete all as specified and directed.

Wash basins, Vitreous China white,(flat back type) size 550x400mm, pedestal type, excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc., fixed as in repairs, complete all as specified and directed.

6mm thick mirror of any size including rounding and polishing of edges with necessay fittings, complete all as specified and directed.

15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe , fixed as in repairs, complete all as specified and directed all as specified.

15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

PVC flexible Waste pipe 32mm dia and 750mm long etc., fixed as in repairs, complete all as specified and directed.

Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed as in repairs, complete all as specified and directed

Vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked, with 'P' or 'S' trap, including supply & fixing bolt and jointing, flushing cistern and flush pipe etc., fixed as in repairs, complete all as specified and directed.

15mm bore hand shower (Health Faucet) with 8mm Dia, 1 Meter Long flexible tube & wall hook, fixed as in repairs, complete all as specified and directed. Make Cera, Parryware, Somany, Jaguar or equivalent.

PVC connections 15mm size with PTMT nuts of length 600mm, fixed as in repairs, complete all as specified and directed.

Toilet paper holder of brass chromium plated and fixed to wall with necessary brass screws, fixed as in repairs, complete all as specified and directed.

Brass chromium plated shower rose 125mm size, fixed as in repairs, complete all as specified and directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws etc., fixed, complete all as specified and directed.

Glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets, fixed as in repairs, complete all as specified and directed.

75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc., fixed, complete all as specified and directed.

Grating doom 125mm dia with or without waste hole of PTMT. (Minimum weight 40gms), fixed as in repairs, complete all as specified and directed.

110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps etc., fixed as in repairs, complete all as specified and directed.

75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/clamps etc., fixed as in repairs, complete all as specified and directed.

75 mm PVC (SWR) bends etc., fixed as in repairs, complete all as specified and directed.

110 mm PVC (SWR) bends etc., fixed as in repairs, complete all as specified and directed.

Removing building materials etc. to a distance of 5 km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed.

Two coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment, complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing, complete all as specified and directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws, complete all as specified and directed or shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification etc., complete all as specified and directed.

100mm butt hinges, medium weight, cold rolled mild steel, and fixed etc., complete all as specified and directed.

150mm Aluminium handles, cast type, anodised etc., complete all as specified and directed.

125mm Aluminium anodised, barrel tower bolts of extruded section and fixed etc., complete all as specified and directed.

300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc., complete all as specified and directed.

Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed.

12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, complete all as specified and directed.

20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, window sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc., complete all as specified and directed.

Chromium plated Towel Ring fixed with Chromium plated brass screws etc. , complete all as specified and directed.

One piece floor mounted toilet water closet of size (WxPxH) 350x665x750mm white or tinted, S-trap 300/ 220/ 110mm or P-trap 180mm, UF ezee close seat cover, wash down system, with flush mechanism and fixed in repairs with necessary fixing bolts/ screws etc., fixed as in repairs, complete all as specified and directed. Make Somany, Cera, or equivalent.

Vitreous china urinals half stall urinal type(back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe, fixed as in repairs, complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)

Preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets complete as directed and removing retrieved materials and making good the disturbed surface all as specified and as directed

Taking down existing light fittings of any description from wall/ ceiling including keeping in safe custody and deposited in AGE E/M Hebbal store yard for reuse by making good the disturbed surfaces of walls all as specified and as directed.

Point wiring complete with 1100volts grade, single core, PVC insulated FRLS cable multi-stranded copper conductor of size 1.5 sqmm nominal area, concealed type drawn through and including PVC conduit of suitable size, wiht all necessary fittings and accessories fixed on walls/ ceiling with one run neutral and one run of single core cable of same description above but green colour in continous earthing wire connected to common earth dolly including PVC junction / mounting boxes on / in the wall for switch socket combination and GI junction box duly covered with 3mm thick hylam sheet complete for the independent switch to ceiling rose, complete all as specified and directed

(a) One light/ fan point controlled by one single pole 5 Amps switch

(b) One switch socket out let point 5 Amps on independent board

(c) One switch socket out let point 5 Amps on same board with other switches

(d) One bell point controlled by one single pole 5 Amps bell push

(e) One light point controlled by two 2 - way switches , with cables 1.5 sqmm

All as per item no 75 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 2.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

All as per item no 75 here in before but for PVC insulated FRLS copper conductor of size 4.0 sqmm for switch socket multipurpose 15 Amps including provision of 4.0 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board

Modularswitch , 1 Module single pole one way 10 Amps.

Modularswitch , 1 Module single pole one way 16 Amps.

Modular 2way switch , 1 Module single pole one way 10 Amps.

Modulars bell push, 1 Module single pole one way 16 Amps.

Modulars fan regulator, 2 Module120 Watt

Modular socket , 2 Module 6 Amps 240 volts Ac 2/3 pin combined suitable for inserting 2 pin 5 Amps/ 3 pin 5 Amps plug top all as specified and directed at site.

Modular socket , 2 Module 6/16 Amps 240 volts Ac 6 pin combined suitable for inserting 3 pin 6/16 Amps plug top all as specified and directed at site.

Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.

Ceiling rose 50 x 24 mm surface type with 3 terminals all as specified and directed.

Bell, AC, 230 volts, single pole all as specified and directed.

Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with single pole MCB 20 Amps 240 Volts AC

LED recess mounted luminaire suitable for 2x2 ft grid ceiling with system wattage of 36 watts , 3600 lumnes, CCT 6500k , CRI > 80 , IP 20 , complete incl PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting (Make-CG of Catalogue No. LCTLRN-36-FO-CDL, or equivalent specifications model of make- Philips/OSRAM/Wipro/GE

LED recess mounted Luminaire system wattage of 12 watts , IP 56, Lumen output 1000 lm/10w , system efficency > 80 lm/ W, CCT 6500K , opuaqe polycarbonate housing moulded high quality diffuser complete including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete (Make-CG of Catalogue No. LCDE-12-CDL, or equivalent specifications model of make- Philips/OSRAM/Wipro/GE

Wall fans 230 volts single phase orbal high speed 450 mm sweep suitable for wall mounting.Make : Havell's, Model : Airboll Hi-Speed or equivalent model of make USHA/Crompton/Khaitan

Rigid PVC trunking white colour of following size for service/submain/ miscellaneous cable complete with fitting such as joints/Tec/elbow/coupler etc, of 130mm x 50mm with cover (make Legrand/PANDUIT/Jeweiss/MK)

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 10.0sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 6.0sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 4.0sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 2.50 sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 2.5sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm drawn through and including rigid, PVC casing & caping of suitable size, with all necessary fittings and accessories fixed on walls, floor or ceiling etc including 1.5sqmm PVC insulated unsheathed copper earth continuity conductor, fixed as in repairs/replacement, complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Takingdown the smoke detector including fitting and fixture such as pipes, wiring etc for reuse at site or carrying to the store and refixing the same after complete the other maintenance work of the room all as specified and directed.

Hi wall split units indoor/outdoor with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 3.0 ton including installation, complete all as specified and directed. Make : Hitachi/LG/Blue Star.

Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with output voltage stabilized at 230 volts with accuracy of +/- 2.5% and of capacity 5.0 KVA, complete all as specified and directed.

Taking down the Split AC of any capacity including fitting and fixture such as pipes, wiring, brackets etc for reuse at site or carrying to store and refixing the same after complete the maintainance work of room, complete all as specified and directed.

S&F LED battern luminaire surface mounted, 4 feet system wattage of 20 watts, 2500 Lumens, efficency >110, CCT 6500k, CRI>80, Wall/surface mounted, I 20 aluminum extusion housing complete with incl connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting, complete all as specified and directed.

SRI GANESH ENTERPRISES

OM Enterprises