Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC Being over all rate reasonable | |
| 2 | L2₹37.8 L+₹3.9 L (11.5%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹37.8 L
EMD Value
₹75,600
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
COMPLETION OF LEFT OUT WKS OF PROVN OF CERTAIN MINOR, REVENUE, SPECIAL REP AND ADD/ALT WKS IN THE AOR OF GE C KHADKI AND PROVN OF CERTAIN MINOR, ADD/ALT AND REVENUE WKS UNDER AGE B/R-I AGE B/R-II AGE B/R(P), AGE E/M-I AND AGE E/M-II IN GE (C) KHADKI.
2023_MES_601442_2
8824/E8 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
KHADKI
AS PER NIT
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹75,600
Yes
20 Sept 2023
13 Jun 2023
7 Jul 2023
13 Jun 2023
5 Jul 2023
23 Jun 2023
13 Jun 2023 - 19 Jun 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Material and labour plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour brick work with using old size Sub-class 'B' bricks, straight on plan, exc 6.0 m mean radius, built in CM (1:4) as in half brick thick walls complete all as specified and as directed.
Spreading, levelling including watering and well ramming in layers the approved soil not exceeding 25 cm thick each layers complete all as specified and as directed. ( Note:- Excavated soil obtained from excavation shall be utilised for filiing under floors/pavings).
Material and labour 75mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) as in subbase of floors/paving etc including necessary formwork complete all as specified and as directed.
Material and labour for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and well rammed to a true surface complete all as specified and as directed.
Material and labour 15mm thick CM (1:6) screed or screed bed layer for laying of floor finishes complete all as specified and as directed.
Material and labour 20-25mm thick, machine cut kota stone laid over cement screed base as in floors and pavings complete including grinding and polishing complete all as specified and as directed.
Description all as per Sl item No-08 above above but as on vertical surfaces of walls such as skirting/dado etc complete all as specified and as directed.
Material and labour 10mm thick CM (1:4) screed or plaster as in backing coat for laying of tiles/slabs vertically on walls as in skirting/dado etc, finished even and fair complete all as specified and as directed.
Material and labour rendering 15mm thick CM (1:4) as on brick masonry surfaces of walls finished even and smooth without using exra cement complete all as specified and as directed.
Material and labour for precast cement concrete block massonry with solid block exceeding 10cm in width and setting in CM (1:6) precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate complete all as specified and as directed.
Material and labour preparing newly plastered surfaces of walls applying 3mm thick wall care putty on wall surfaces and applying two coats of distemper oil emulsion over alkali resistant primer on surfaces of walls complete as specified and as directed.
Supply and fix 1.60 mm thick mild steel plain sheet for fixing of window closing with complete welding and necessary turning ends and mitred angles stopped ends outlets etc as required complete all as specified and as directed.
Material and labour preparation of new steel surfaces and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.(Note:-shade of the paint should be approved by the GE)
Material and labour provn of wicket gate 1.50 m wide and 1.90m height with RCC columns complete all as specified and as per drawing No.CEPZ/95/TD/1 dated 18.01.1995.
Material and labour timber, 2nd class hard wood, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 13 sqcm and n. exc 25sqcm complete all as specified and as directed.
Material and labour 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete as making good to wall all as specified and as directed.
Supply and fix 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing all as specified and as directed.
Supply and fix Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.
Supply and fix 200mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix Aluminium handles, cast type, anodised of size 150mm, fixed with screws or welded, complete all as specified and as directed.
Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Taking down chowkats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and as directed.
Supply and fix Pressed steel frames made of 1.25 mm thick MS Sheet size 165x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & as directed by Engr-in-Charge.
Material and labour 35mm thick second class hard wood plain, framed paneled shutters (any numbers of panels) with panels of timber flat on both side (feathered edges) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkat complete all as specified and as directed.
Supply and fix framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.
Material and labour preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, etc treating ends of posts, backs of chowkats, etc., treated with tar or coal tar black paint complete all as specified and as directed.
Supply and fix door closer hydraulically regulated, Aluminium (extrude section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed
Material and labour preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Material and labour forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in cement mortar 1:4 complete all as specified and as directed.
Supply and fix steel windows (Factory Made) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded complete making good to wall all as specified and as directed.
Taking down chowkhats or frame with shutter without taking off shutter from the frame not exceeding 1.50 Sqm each complete all as specified and as directed.
Supply and fix 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides complete all as specified and as directed.
Supply and fix three track aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings complete all as specified & as directed.
Supply and fix aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx1.25mm, shutter top section 47.62mm x 44.45mmx1.25mm thick, shutter bottom section 114.30mm x 44.45mm x 1.25mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.25mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, door stopper complete all as specified & as directed.
Supply and fix aluminium alloy powder coated glazed or skelton shutter including frame of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to frame as directed and as per IS specifications including Supply and fix mild steel wire cloth 0.56mm dia and apperture 1.4mm and required handles, tower bolt,rubber gasket complete.
Supply and fix door closer hydraulically regulated, Aluminium (extrued section) body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and paving below or above GL removing debris out side MD land complete all as specified and as directed.
Demolition of trellis work (Jafri), two way including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and as directed.
Supply and fix pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, ventilator with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & as directed by Engr-in-Charge.
Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & as directed by Engr-in-Charge.
Supply and fix mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified & as directed by Engr-in-Charge.
Dismantling single/double layer mangalore pattern or similar tiles or ridge in roofing complete all as specified and as directed.
Supply and fix roof tiles, mangalore pattern, inter locking at side joints laid dry complete all as specified and as directed.
Description all as per item No 46 above but except Mangalore tiles complete all as specified & as directed by Engr-in-Charge. NOTE :- Material shall be used from dismantling.
Supply and fix 0.63 galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 Gms/Sqm including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
Supply and fix plain, galvanised mild steel sheeting in ridges hips valley gutters drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided including dismantling of plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern as in roof covering/valley gutters complete all as specified and as directed.
Supply and fix second class soft wood clean sawn battens at 30 cm centre to centre and sectional area exceeding 15 Sqcm and not exceeding 25 Sqcm including dismantling Battens for tiles, singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.
Supply and fix second class hard wood clean sawn in scantlings including dismantling timber in scantling 40 sq.cm and over in section in any position and any description unframed work complete all as specified and as directed.
Supply and fix 2nd class hard wood plain fillets, rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm including dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.
Supply and fix E-board 'Everest' make 595x595x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour complete all as specified and as directed.
Material and labour preparing surfaces of wood and wood based materials new or old of any description and girth, not other wise described and treated with two coats of creosote oil complete all as specified and as directed.
Material and labour RCC nominal mix types A1 1:1.5:3 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
Material and labour RCC nominal mix types A1 1:1.5:3 (20mm graded stone aggregate) as in beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Material and labour Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Description all as per item No.57 above but 5mm and over up to and including 10mm dia as in stirrups spacers and binders complete all as specified and as directed.
Material and labour formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
Material and labour rendering 10mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.
Material and labour virified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour 25 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor, pavings etc, finishing the surface fair and even without using extra cement complete all as specified and as directed.
Material and labour glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick screed bed in cement morter 1:4 set and joined in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Material and labour for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour preparation of cement plastered surface of any description and applying two coats of oil bond distemper emulsion white or tined over priming coat of chalk whitening on wall complete all as specified and as directed.
Material and labour preparing the new concrete or plastered surface of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and as directed.
Material and labour coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments ,set jointed and pointed in neat cement slurry in floors over & including 15mm thick screed bed in CM 1:6 and hacking/roughning of old concrete surface complete all as specified and as directed.
Dismantling mild steel work of any description and in any position complete all as specified and directed by Engr-in-Charge.
Supply and fix rolled MS section as in roof trusses (framed), trussed, purins, verticle members of sheds ,crane gantries, rails and fastenings and heavy brecket framing (Beam, tee, angel ,channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates confirming to Fe 410-W quality B complete.
Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long and dia of neck is 5 to 10mm.
Material and labour for PCC 100 mm thick 1:2:4 type B2 as in hardstanding/foor (using 40mm graded stone aggregate) finished even & smooth without using extra cement complete all as specifed and as directed.
Demolition of brick work built in cement mortar etc., complete all as specifed and as directed.
Material and labour Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 all as specified.
Material and labour providing PCC 1:2:4 type B1 using 20mm graded stone aggregate as in cills, steps, seismic &. other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles & throating complete all as specified and directed.
Material and labour for rendering 15mm thick in CM 1:6 on brick surface finished even and smooth without using extra cement with sagol finish complete and all as specifed
Material and labour for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed.
Taking down carefully existing unserviceable aluminum / copper point wiring of any description & in any position with and including existing steel conduit / PVC Conduit / Casing caping fixed on surface/wall/angle/gardder and including all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.
Material and labour for point wiring consealed type in non metallic PVC conduit of suitable size not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles etc. with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl suncun type MS sheet box of 1.6 mm thick of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall inclooding repairing material all as specified and directed by Engineer in charge. NOTE :- Cutting /chasing to consealed the conduit pipe and fixing of sunkun box is to be done in brick / solid concrete block mashnary wall upto ceiling height and then on ceiling
Description all as per Srl item No 78 above but point wiring for 5 pin socket outlet, 5 Amps on same board with other switches.
Description all as per Srl item No 78 above but point wiring for 5 pin switch socket outlet combination, 5 Amps on independent board.
Description all as per Srl item No 78 above but point wiring for one five pin switch socket outlet combination, 15 Amps & 5 Amp on independent board using 2.5 sqmm two run and one run 2.5 sqmm (nominal area) stranded copper conductor cable.
Supply and fix switch flush type, 5 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed.
Supply and fix socket outlet, five pin, 5 Amps, flush type, multipurpose, 230 volts AC circuit complete all as specified & directed.
Supply and fix switch flush type, 15 Amps, single pole, one way , 230 volts AC circuit complete all as specified & directed.
Supply and fix Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type , flush type, 230 volts AC circuit complete all as specified & directed.
Supply and fix ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified & directed .
Supply and fixing Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified & directed.
Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall all as specified and directed by Engineer in charge.
Material and labour for Sub main wiring at any height with and including two single core PVC insulated multi stranded copper conductor cable, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New PVC non metallic conduit including connected accessories and one single core PVC insulated multi stranded copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade, as earth contuinity wire all as specified and directed by Engineer in charge.
Dismantling and taking out old unserviceable light fittings any type from any location complete all as specified and directed.
Supplying, fixing, connecting and testing surface mounting LED Tube Light Batten Fitting 1x20 Watt 4 feet white colour tube lamp including connecting wire 23/0.0076 copper conductor flexible twisted two core including all accessories (mounting SS clips) and fixing arrangements for fixing the light fitting on wallcomplete all as specified & directed . MAKE :- Bajaj Cat No BCLSBAL 20W CW or equivalent in Havells/C&S/Philips.
Supplying, fixing, connecting and testing 36 W aesthetically designed 2x2 LED edge-lit ultra slim luminarie flat panel for recess mounting in grid/armstrong type ceiling including suitable LED driver and connecting with 23/0.0076 copper conductor flexible twisted three/two core cable and including mounting accessories complete all as specified & directed. MAKE :- Bajaj Cat No BCTBLR 36W LED FP CW or equivalent in Havells/C&S/Philips.
Disconnecting and taking down old switch fuse type distribution Box with MCB/fuse grip TPN/SPN DB 2 Way to 12 Way old type including taking out all cable connections of any description and in any position and making good the disturbed surface to match with the existing surfaces complete all as specified and directed by Engineer in charge.
Supply, fixing, connecting & testing double door sheet metal SPN distribution board 8 way with 100 Amps rated copper bus bar, IP 43, IK 09 class, inclusive of Neutral bar, Earthbar complete all as specified & directed. MAKE :- Legrand Cat No 6076 11 or equivalent in /L&T/ ABB/Schenider.
Supply, fixing, connecting & testing double door sheet metal SPN distribution board 12 way with 100 Amps rated copper bus bar, IP 43, IK 09 class, inclusive of Neutral bar, Earthbar complete all as specified & directed. MAKE :- Legrand Cat No 6076 12 or equivalent in /L&T/ ABB/Schenider.
Supply and fix MCB 6 to 32 Amps, single pole and neutral, 10 kA breaking capacity color coded On/Off indication , IP 20 , sliding shutters complete all as specified and directed. MAKE :- Legrand Cat No. - 4086 17 or equivalent in /L&T/ ABB/Schenider.
Supply and fix MCB 6 to 32 Amps, single pole 10 kA breaking capacity color coded On/Off indication , IP 20 , sliding shutters complete all as specified and directed. MAKE :- Legrand Cat No4085 87-95 or equivalent in /L&T/ ABB/Schenider.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground, earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5mtr below GL connected to and including 25 x 4 mm GI strip upto 7.5 m long by means of GI bolts, nuts, check nuts & washers and connected to earthing test point & earth dolly all as shown in electrical plate No 3 of SSR part I- (2009), earth lead protected with and including 40 mm bore GI pipe light grade and 20 mm bore medium grade watering pipe and testing on completion including excavation & earth work in any type of strata , PCC (1:3:6) type C-I chamber, precast slab 50mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric of XPM, weight not less than 4 Kg /Sqm) with cast iron frame ,funnel with water pipe , wire mesh and lugs etc complete all as specified and directed
Supply and fix earth continuity conductor or main earthing lead of size 25 x 4 mm GI strip fixed to wall drawn in conduit/pipe or any other indicated situation for loop earthing etc. incl removal of old as required all as specified and directed
Disconnecting and taking out burnt Service Wire aluminium conductor cable of any description and in any position from walls / steel structure / laid in floors any size any core complete all as specified & directed by Engineer-in-Charge.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension GI wire, one twin core cable flat or circular including dismantling and taking out old burnt electric cable all as directed .
House service bracket (hook type complete with 3.0 m long G.I. pipe 40 mm dia Med. grade, two nos 90o bends. M.S. hook and stay or guy after disconnecting of old one
M/S JAYCONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .