Construction of RCC Drain Interlocking work and Construction of Road at Industrial Area Neharu Baag in Distt. Unnao

Amount

Cleaning Jungle including uprouting of trunk vegetation grass bush ,wood ,tries & saplings of girth up to 30 cm measured at a height of 1 metre above grund level & removal of rubbish upto a distance of 50 metres out side the periphery of area cleared. As pwd SOR 259

Construction of embankment with approved material obtained from availble land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density

Brick edging on both sides of the road with first class bricks 8 cm wide & 12 cm deep laid with mudmortar including labour & supply of bricks finished to required template and in proper alingment and also including dressing & ramming the excavated earth as directed by the Engineer - in -charge.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.7 kg/sqm using mannual means.

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared surface cleaned with hydraulic broom .

Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing by mixall ,laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat .

Providing and laying seal coat 'C' Type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall

Scarifying existing bituminous road surface to a depth of 50 mm and disposal of scraified material all lifts and lead up to 1000 meters

Earthwork in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing,removal of stumps and other deleterious matter,dressing of sides and bottom,brakfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. as per PWD SOR 251

Plain cement concrement 1:4:8 (1 cement:4fine sand:8 graded brick aggregate 40 mm nominal size ) including supply of all material labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation & floors as per PWD SOR 275

R.C.C. work with cement approved coarse sand and 2.cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windowss excluding supplying of reinforcement and its binding but including its fixing and binding the same with 24 gauge binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work binding wire cost being includeed in the item as per PWD SOR 283

Supplying fitting and placing TMT bar reinforcement in superstructure complete as per drawing and Technical Specifications clauses 1002, 1010 and 1202

Providing and laying 80 mm thick Premoulded intelcoacking tiles over 15 cm compacted GSB including 3 cm thick local sand bed over prepared surface including all labour T&P etc. required for proper completion of work

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Supply & fixingof 7.0 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation includingthe cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. as PWD SOR 641

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75 watt to 90 Watt. Confirming to IP65/66 protection having Company LOCO Engraved complete in all respect including labour. CAT. - AAA as per PWD SOR 1423 8250-9900 system lumens, High Power LED with lenses, 110 Im/W, PF>0.95,THD<10% at full Load,CRI>70, Potted driver set (Not Circuitory), Phase to Phase Protection at 440V & >300V auto cut and re-statr feature with 5 year warrantee.

supply and fixing of 40 amp TPN automatic street light cubicle control pannel with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 seeries with contactors, HRC fuse, isolating switch, metering instrument and instrument box with CTs etc.complete in all respect. as per pwd Sor 807 F(II)

Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Following : size 6 sq mm x 2 core as pwd sor 501

Same as above Item No. 21 but size 10 sq mm x 4 core

Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer -incharge. For cable size 6 sq mm x 2 core

Same as above Item No. 23 but size 10 sq mm x 4 core

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of engineer -incharge. For cable size 6 sq mm

Same as above Item No. 25 but size 10 sq mm

SHAKUNTALA SINGH

ABHISHEK ENTERPRISES

PARAMJEET SINGH