SPECIAL REPAIR TO BLDG NO P-12 (04 QTRS) MD ACCN AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished fair and even without using extra cement and with or without fixing of chicken wire gauge and water proofing compoundwhere directed complete all as specified and directed by Engr-in-Charge. Note : WPC and chicken wire gauge will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd good to disturbed surfaces shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. incl pcc 1;2;4 in backfilling of chowkhats and holdfasts complete all as specified and directed by Engr-in-Charge.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.incl pcc 1;2;4 type B-0 in backfilling of chowkhats and holdfasts complete all as specified and directed by Engr-in-Charge.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing complete all as specified and directed by Engr-in-Charge following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing complete all as specified and directed by Engr-in-Charge following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges. (Make:Sintex /Cactus/Rajashree) complete all as specified and directed by Engr-in-Charge. including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and wire gauge shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete all as specified and directed by Engr-in-Charge and fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO (d) Aluminiun hook and eye -01 nos per leaf NoteL: for measurement purpose complete window should be double shutters incl portion with provision for cooler and should be considered one unit

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed by Engr-in-Charge.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") complete fixed in position in windows complete all as specified and directed by Engr-in-Charge.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and directed by Engr-in-Charge as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete un -reinforced in ground floors/FF and pavings n.exc 15cm thickness complete all as specified and directed by Engr-in-Charge.

M&L Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 7-8mm thick and area exceeding 0.11 sqm but not exceeding 0.18 sqm, coloured as in flooring etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:4 over and including 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate finished fair and even complete all as specified and directed by Engr-in-Charge.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

M&L Black colour Granite 16-20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including 10 mm thick rendering in CM (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding, molding and polishing on edges complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab as in flooring and stepsof size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green/white mable as per pattern approved over & including screed of 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed by Engr-in-Charge. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed by Engr-in-Charge.

S&F vitreous china premium/1st quality wall hung wash basin half pedestal, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread incl pvc pipe 40mm upto floor trap incl pvc connection ,and angle cock and also incl CP brass wash basin mixer and complete in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F vitreous china premium/1st quality wash down water closet pan (pedestal pattern/EWC) incl taking down existing IWC and making good disturbed surfaces ,incl floor trap and grating ,S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect complete all as specified and directed by Engr-in-Charge.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including,incl pvc connection and cp angle cock, brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick looking mirror beveled edge fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish, etc.complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F PTMT 450mm long shelf for wash basin. Fixed in position complete all as specified and directed by Engr-in-Charge.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed by Engr-in-Charge.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed by Engr-in-Charge.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and directed by Engr-in-Charge.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed by Engr-in-Charge.

S&F Sink Cock wall mounted double mixer type both ends with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460X203mm with bowl size 405x 354x203 and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed by Engr-in-Charge.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete all as specified and directed by Engr-in-Charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-Charge.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-Charge.

Taking down of PVC water srorage tank of of 300 to 500 ltrs capacity as located on terrace of the building complete all as specified and directed by Engr-in-Charge.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered separetely complete all as specified and directed by Engr-in-Charge.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed by Engr-in-Charge.

Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L cast iron multifloor/floor/nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed by Engr-in-Charge.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed by Engr-in-Charge.

Taking down of existing CI pipe 100 mm bore and refixing the same after cleaning painting with 2 coats in any position complete all as specified and directed by Engr-in-Charge.

S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface complete all as specified and directed by Engr-in-Charge.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed by Engr-in-Charge.

S&F cast iron 4 way junction for 100mm bore with access door as in repair complete all as specified and directed by Engr-in-Charge.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed by Engr-in-Charge.

S&F CI Bends (any radius), for 100mm bore CI pipes complete all as specified and directed by Engr-in-Charge.

S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.

M&L for cast iron cowls of 100 mm dia complete all as specified and directed by Engr-in-Charge.

Repair to RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out, Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and complete all as specified and directed by Engr-in-Charge. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C.

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 15mm to 50mm mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note for BOQ Item no. 69-72 : Incl all safety equipments, Ropes, safety belts and ladders (Scaffolding) as reqd upto hight of 15 Mtr is included in items

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engr-in-Charge.

Demolition of mud phuska on roof any thickness complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engr-in-Charge.

PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed by Engr-in-Charge.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed by Engr-in-Charge.

PCC plain factory made tiles ISI marked cement concrete tiles of size 250x250x20-22mm thick machine pressed set joined and pointed in neat cement slury in floor and cut and polished with grey cement and no pigment over 15mm thick cement mortar (1:3) bedding and joints grouted flish in cement mortar (1:3) mixed with integral water proofing compound over roof surface complete all as specified and directed by Engr-in-Charge.

M&L for dummy joints/construction joints 8mmx10mm as in PCC floors filled with polyurethane elastic adhesive/sealant (white/grey colour) of approx density 1.30kg/litre complete all as specified and directed by Engr-in-Charge.

M&L for hardcore of beicks obtained from demolition/dismantling of brick work/brick tiles of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 incl demolition complete all as specified and directed by Engr-in-Charge.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as specified and directed by Engr-in-Charge.

PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed by Engr-in-Charge.

Preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed by Engr-in-Charge.

S&F -15-18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.

S&F 15-18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed by Engr-in-Charge.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed by Engr-in-Charge.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed by Engr-in-Charge.

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed by Engr-in-Charge.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Preparation of surfaces (plastered or unplastered) of ceiling and M & L for applying three coats of lime white wash on ceiling surfaces etc., complete all as specified and directed by Engr-in-Charge.

Preparation of new/old plastered or unplastered surfaces of walls etc., and M & L for applying two coat of distemper oil emulsion (OBD) over a coat of chalk whiting (as primer) complete all as specified and directed by Engr-in-Charge.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat and incl 2 coats 0f putty as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills,Gates, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for Steel rack for kitchen 750m x 600mm of weight not less than 5 Kg each fixed in repair complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and directed by Engr-in-Charge.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 107 above herein before but one 5Amp socket point on independent board complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 107 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed by Engr-in-Charge.

All as per Sl item No 107 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 2.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded stranded copper earth continuity conductor complete all as specified and directed by Engr-in-Charge.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed by Engr-in-Charge.

S& F Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified and directed by Engr-in-Charge.

S & F Modular switch 1 way, 16 Amps, 1 module complete all as specified and directed by Engr-in-Charge..

S & F Modular socket 3/5 pin 6 Amps, 2 module with shutter complete all as specified and directed by Engr-in-Charge.

S & F Modular socket 3 pin 6/16 Amps, combination type with shutter 2 module complete all as specified and directed by Engr-in-Charge.

S & F fan regulator 4 step modular type 1 module, 100 W complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals complete all as specified and directed by Engr-in-Charge.

Supply and fix bell ding dong electronic complete all as specified and directed by Engr-in-Charge.

S & F Lamp holder with LED bulb 9 W incl flexible wire 0.5 Sqmm copper cable complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of existing unserviceable batten fitting with LED batten fitting of 20W, 4 feet long of extruded thermoplastic body with PC diffuser, isolated body environmental friendly energy efficient including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of existing unserviceable batten fitting with LED batten fitting of 10W, 2 feet long of extruded thermoplastic body with PC diffuser, isolated body environmental friendly energy efficient including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

Supply and fix Surface Mounted LED Bulk Head 10 Watt Luminaire with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and directed by Engr-in-Charge.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specified and directed by Engr-in-Charge. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for earth

S&F MCB , SPN, 240 Volt ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engr-in-Charge.

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed by Engr-in-Charge.

S&F in replacement VTPN sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways (one incoming three phase & four out goings three phase ) including MCCB 63A as incommer with isolated Neutral bar, mechenical Impact strength IK-09, IP-43 protection, copper strip bus bar of appropriate capacity complete all as specified and directed by Engr-in-Charge and comprising of the following (a) MCCB FOUR POLE 63 AMPS AC 415 VOLTS 16 kA =01 NO as incoming (b) MCB SPN, 240 V, 40A, 10 kA - 05 Nos (Note :- (i)The DB shall be VTPN series of Indoasian Cat No- 811888 or equivalent in L&T , ABB . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRls ,stranded copper conductor cable drawn in including PVC concealed conduit 25 mm dia incl 4.0 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire complete all as specified and directed by Engr-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 2.5 Sqmm multi -strand copper conductor drawing in PVC conduit heavy duty duly fixed with S/S clamp at every 1 mtr intervel with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed by Engr-in-Charge. Note: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

S & F in replacement LED Bldg security light 20/25 Watt including all connecting acessories including MS pipe 20mm bore with clamps for fixing of Light on wall complete all as specified and directed by Engr-in-Charge.

M&L in replacement Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, retuning filling, Removal of surplus soil, charcoal and common salt mixed refilling of soil etc all included complete all as specified and directed by Engr-in-Charge.

M&L for Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge. Note:- Old u/s C/Fan to be deposited in MES store.

M&L for taking down old u/s Exhaust fan and supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, BEE, five star rated with louver including fixing the fan with all connecting accessories and making electric connection from C/rose etc. complete all as specified and directed by Engr-in-Charge. Note:- Old u/s E/Fan to be deposited in MES store.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size16 sq mm 4 core complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and directed by Engr-in-Charge.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and directed by Engr-in-Charge.

SWAMI ENGINEERS

Buttar Construction Co.

M/S RAJ KUMAR GUPTA

rkkataria and sons

M/S Mukesh Kumar Gupta

FAVOURITE ENGINEERS

NORTON BUILDER

M/s R.N Construction Co.