PROVN OF COVERED SHED AND TOILET BLOCK IN BRICHGUNJ MILITARY STATION UNDER GE BRICHGUNJ

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft/loose soil, complete all as specified and as directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over area, exceeding 1.5m but not exceeding 3m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.

M & L for RCC- M - 30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts as complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the like complete all as specified and directed.

M & L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Fair finished surfaces complete all as specified and directed.

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste of form work to sides and sofit of Beams for Fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed.

M&L for rendering 15mm thick in two coats on faces of brick work or concrete surfaces; first coat (rendering coat) of 10 mm thick in cement mortar 1: 6 and second coat (finishing coat) of 5 mm thick in cement mortar 1: 4 mixed with 2% water proofing compound (water proofing compound to be measured separately as supply only) and finished even and smooth complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 3 on faces on concrete surfaces such as Roof Top slab etc; mixed with 2% water proofing compound (water proofing compound to be measured separately as supply only) and finished fair and even complete all as specified and directed.

Supply only water proofing compound.

M&L Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over chalk whiting including primer complete all as specified and directed. .

M&L Preparation of Newly Plastered surfaces on Ceiling surfaces and applying Two coats of Oil Bound Distemper over chalk whiting including primer complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.

Supply only 12mm thick particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed to aluminium frame complete all as specified and directed.

Supply only 4mm thick figured glass, pinhead type in squares n.exc 0.5sqm in each pane fixed to aluminium frame complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Spreading and leveling excavated approved soil in layers not exceeding 25cm thick including watering and well ramming complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed.

M&L 25mm thick cement concrete type B-0 (12.5mm graded stone aggregate) as in RCC roof / Floor surface for level coarse complete all as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate of 75mm thick as in Plinth Protection complete all as specified and directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 complete all as specified and directed.

M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Glazed Ceramic Coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match all as specified and directed including backing coat 10mm thic in CM 1:6 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed.

S&F 200mm Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and directed.

S&L of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified and directed. (a) Outer diameter of pipe in 20 mm

(b) Outer diameter of pipe in 25 mm

S & F 1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position all as specified in SSR Part I complete all as specified and directed.

S&F 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed.

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and directed.

S&F looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F Chromium Plated Steel Grating of 100mm size complete all as specified and directed.

S&F Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipewith connecting Assoceries complete all as specified and directed.

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

S&F 2 Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes complete all as specified and directed. (Make:- Prayag Cat No -8312 or Equivalent)

S&F as in repair Hand Shower (Health Faucet) 1 Meter Long Flexible Tube & Hook complete all as specified and directed. (Make:- Jaquar Cat No ALD CHR -585)

S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) all as specified & directed.

S&F vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed.

S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed.

S&F 100 mm CI Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed.

S&F 75mm dia outlet PVC (SWR) floor trap,plain with grating incl joining with solvent cement complete all as specified and as directed.

S&F PVC (SWR) Gully 125/110 mm,seting and incl joining with solvent cement complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls and laid in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and as directed.

S&F PVC (SWR) cowls 75mm dia complete all as specified and as directed.

S&F PVC (SWR) cowls 110mm dia complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested in cement conrete 1:3:6 type C-2 around 110mm dia complete all as specified and as directed..

M&L for precast man holes cover slab with 1:2:4 type B1 using 20mm graded stone aggregate set in CM 1:4 incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc complete all as specified and as directed.

M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete all as specified and as directed.

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and as directed.

S&F Steel work in tubular/structural trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F mild steel plates (plain or chequered) conforming to Fe 410-W (Gde E-251) quality –B, channels, squared cut or notched (ordinary or countersunk), forming holes, without any attachments welded to frame/truss complete all as specified and directed.

M&L Painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified and as directed.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and as directed.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and as directed.

S&F Mild steel work conforming to Fe-290 Gde E-165 in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed., drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M & L for Point wiring concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and directed for: (a)One light point controlled by one, one way switch SP 5 Amp

(b) One Exhaust Fan controlled by one switch .

S & F switch piano SP flush type 5 Amp one way complete all as specified and directed

S & F ceiling rose surface bakelite PVC 65 x 20 mm size 3 terminal complete all as specified and directed

Supply and fix Regal Batten for LED T8 Tube light fitting 1x22 Watts 240 volts, including Crystel Glass LED Tube rod with high efficacy suited for installation in existing T8 fitting with G13 lam holders of 20 w and all accessories pre-wired complete all as specified as directed.

S & F double door sheet metal enclosure for DB SPN 4 Way 200 Amp rated bus bar 415 volt complete all as specified and directed

M & L for MCB SPN 240 volt 32 Amp ' C ' Series complete all as specified and directed

M & L for MCB SP ' C ' Series 5 to 32 Amp 240 Volt complete all as specified and directed

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm complete all as specified and as directed.

Supply ang laying un-reinforced precast concrete cable cover class LV, type 1, flat, size 250mmx150mmx40mm complete all as specified and directed

Supply and fix exhaust fans electric driven AC single phase 230 volts 300 mm sweep with louvers including grouting and making whole in wall and taking down of unserviceable item complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

S&F LED Bldg security light fitting 35W outdoor type with high pressure die cast aluminium hosing and hea resistant complete with driver and all specification and fixing on bldg with provision of suitable size GI bracket complete, all as specified as directed

Supply and fix Galvanished iron steel tubing of medium grade with all fittings of 25 mm dia in size complete all as specified and directed

Supply and fix Galvanished iron steel tubing of light grade with all fittings 0f 20 mm dia in size complete all as specified and directed

Supply and fix of Gun metal gate valve ISI marked with iron wheel head at both ends for iron pipes and fixed for the following sizes: (a) 20mm bore

(b) 25mm bore

Cutting the existing water main 40mm dia and insert 'T' reducer/ ferrule for taking branch connection size 25 mm including all materials as required and excavation, earth work complete all as specified and directed

SKV Engineering

CHANDER SEKER ENTERPRISE

V KARTHICK

ANITA VARMA ENTERPRISES

M/s K Moorthi

M/s S A Traders

DEEPAK AGENCIES