SPECIAL REPAIR TO BLDG NO P-71 OF 213 TRANSIT CAMP UNDER GE NAGROTA

Amount

B/R Portion: - Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm each but n exc 4 sqm and removing from site complete all as specified and directed

Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm and removing from site complete all as specified and directed

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided complete all as specified and directed

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness of floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc complete all as specified and directed

S&F Pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed

S&F Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed

S&F Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as specified and directed shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

S&F Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

S & F Factory made, 2nd class hard wood, plain framed, Double/Single paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and directed

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed Note:- Wire mesh and glass sheet shall be measured and paid separately.

Repair for easing of wooden/steel doors/window by tightening of hinges/handles/aldrop bolt/tower bolt/knobs, hasp and staple etc of any size/ any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, Alu Locks, Gasket, Beading, oiling etc complete including replacement of minimum defective item if required, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm dia and fixed with stainless steel wirestaples fixing in doors and windows complete all as specified and directed

S&F Sheet glass 4 mm thick ordinary quality and glazing with oil putty complete all as specified and directed.

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 25mm thick as in Sub base floor complete all as specified and directed

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long complete all as specified and directed

S&F MS 300 mm ordinary rat rails rod pattern door springs including roller and roller plate complete all as specified and directed

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed Note:- The rates for floor door stoppers included for vulcanised rubber piece.

S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S & F 150mm steel barrel tower bolts, Mat finish with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by the Engineer-in-Charge

M&L Brick work with sub class “B” bricks straight or curved on plan exc 6m mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified and directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally) complete all as specified and directed

M&L for Rendering 15mm thick (10mm+5mm) in two layers on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement with Water proofing compound complete all as specified and directed (WPC shall be measure and paid separately)Note:- WPC to be used and measured only in top layer(5mm) of plastering.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface complete all as specified and directed

Supply only Liquid water proofing compound.

Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even ( avg 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed including two coats of cement base paint over a coat of primer over new plaster surface including preparation etc complete all as specified and directed (after curing of specified time and drying the surfaces as required).

M&L for Applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description,of any width or girth including preparation of surfaces complete all as specified and directed

M&L for Preparation of Complete removal of existing treatment preparing old plastered surfaces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. and by applying two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and directed

M&L FOR Preparation of newly plastered surfces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and by applying two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and directed

M & L preparing new plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm) complete all as specified and directed

M & L for complete removal of existing trreatment preparing old plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm) complete all as specified and directed

M&L for Preparation of newly plastered surfces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and directed

M&L for Complete removal of existing treatment and preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and directed

M&L for preparing of old untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed by engineer-in-charge

M&L for Machine cut kota stone flooring 18 -22 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished complete all as specified and directed

M&L for Machine cut kota stone slab 12-15 mm thick in skirting, dado and pillars, risers of steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado complete all as specified and directed Note:- Single piece kota stone will be used in Risers.

M&L for Machine cut kota stone flooring 18-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick screed bed in CM ( 1:4) as in floor finished complete all as specified and directed Note:- Single piece kota stone will be used in Treads.

M&L for PCC 1:2:4 type B-1 as in benching, coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of roof, chajjas, rails, cills etc complete all as specified and directed

M&L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection (75mm thick ) finished even and fair complete all as specified and directed

M&L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas, shelves and similar items complete all as specified and directed

M&L for Providing 75mm thick precast reinforced cement concrete slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and set in CM 1:4 complete all as specified and directed ( NOTE : (reinforcement shall be measured and paid for separately).

M&L for Form work to chajjas, shelves ,troughs and similar items including edges complete all as specified and directed

M&L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm. Fair finished complete all as specified and directed

M&L for TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed

Description all as per serial item No 50 above but for 6mm to 8mm dia complete all as specified and directed

S&F of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E165 complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

S&F in repair Stainless steel Kitchen sink without drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed

S&F in repairs 20 to 25mm external dia drapery rods stain less steel with incuding designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet with curtain rods complete all as specified and directed

S & F Tubular towel rail,Brass chromium Plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed

Supply and fixing soap dish of minimum size 160mm x 120mm Stainless steel, fixed as in repair complete all as specified and directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Supply and fix for PVC moulded shutter door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

Supply and fixing Sheet glass 3.00mm thick pin head type glass.ordinary quality and glazing with oil putty complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm dia and fixed with stainless steel wire staples complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M & L for Glazed ceramic colored tiles 300mmx600mmx 6 to 7mm thick,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed

S & F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding complete all as specified and directed

S & F for Rotational moulded polyethene water storage tank 1000 ltr capacity three layer white in Colour hoisted and fixed in position including Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) and including dismantling of existing water storage tank complete all as specified and directed

Taking up or down steel tubing and connections including cleaning for refixing or removal from site upto 25mm bore complete all as specified and directed

S & F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and directed

S & F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified and directed

S & F Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed

S & F Shower rose brass chrominium plated 125mm size complete all as specified and directed.

S & F 15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F Cast copper alloy CP angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed

S/F in repairs 15 mm dia wall Bend mixer brass chromium plated fixed to existing pipe/connections cluding telephonic hand shower and all necessary fittings complete all as specified and directed by Engr In Charge

S & F for Vitreous china squatting pan “ORISSA” pattern size 630x450mm white with integral foot rests all as fixed in repairs including cast iron ‘P’ or ‘S’ trap 100mm bore fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China Urinal, full stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with including 60mm long brass screws complete all as specified and directed

S & F Vitreous china wash down closet pan Semi Pedestal pattern (Anglo Indian Type) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge (including making good to floor and fixing in repairs)

S & F in repairs,PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete all as specified and directed

Dismantling cast-iron/PVC pipes Type A including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and directed

S&F 100mm dia CI sand cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors/fixed to wall or dia in repairs complete all as specified and directed by Engineer-in-charge.

S&F 75mm dia CI sand cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors/fixed to wall or dia in repairs complete all as specified and directed by Engineer-in-charge.

S&F 100mm dia CI sand cast soil waste and vent bends/Branches diminishing pieces or tappers(larger bore measurements) complete all as specified and directed by Engineer-in-charge.

S&F 75mm dia CI sand cast soil waste and vent bends/Branches diminishing pieces or tappers(larger bore measurements) complete all as specified and directed by Engineer-in-charge.

S&F 75mm dia CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (larger bore measurements) complete all as specified and directed by Engineer-in-charge.

M&L for 125/110mm dia PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m complete all as specified and directed

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and directed Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and directed

M&L for Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and directed

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions complete all as specified and directed (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

M & L for Cement Concrete tiles 25 cm x 25 cm x 20-22 mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over and including 10mm thick cement screed bed in cement mortar 1:4 over a tack coat of industrial bitumen 85/25 grade @1.2 kg/Sqm with spreader sand on top of APP membrane complete all as specified and directed.

Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. Note:- WPC shall be measured and paid separately,brick bats filling and spout fixing shall be deemed included in quoted rates.

M & L for PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar complete all as specified and directed by Engr in Charge.

Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified and directed by Engr in charge.

M & L for Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed complete all as specified and directed

Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe complete all as specified and directed

E/M Portion: - Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and directed by Engr-in-Charge

Taking down ceiling fan/Exhaust Fan any sweep, cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engr-In-Charge.

Taking down existing light fitting of any type or make, complete all as specified and directed by Engr-in-Charge

M&L for Concealed Point wiring for One light / fan point controlled by one switch 5 Amp using FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor earth wire drawn in and including PVC conduit ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc incl testing and making good to disturbed surface to match existing surface for modular switches complete all as specified and directed (Note : Box , Cover plate shall be measured & paid for seperately under respective items )

Description all as per serial item No 104 above but for One 5 pin socket out let 5Amp controlled by one switch on same board complete all as specified and directed

Description all as per serial item No 104 above but for One 5 pin socket out let 5Amp controlled by one switch on independent board complete all as specified and directed

Description all as per serial item No 104 above but here in before for point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15Amp switch on independat board complete all as specified and directed

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 3 module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 2 module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 8 module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 12 module complete all as specified and directed

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 1 module complete all as specified and directed

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F of LED Inverter Chargeable bulb 12 Watt backup min 2 hours complete all as specified and directed

Supply and fixing LED lights fitting 1x 18 W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed

S&F (VTPN) sheet metal enclosure double door for distribution board factory made for MCCBs DB load link VTPN 4 way suitable for MCCB as incomer, (when MCB's are to be used) with suitable size of busbar complete ,fixed in/on wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down existing UNSV DB with MCBs/ MCCBs.complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs complete all as specified and directed

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete all as specified and directed

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete all as specified and directed

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting complete all as specified and directed

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 06 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections complete all as specified and directed

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 2 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed

BHARTI CONSTRUCTIONS (BID ID -3194629)

RAJINDRA ENGINEERS & CONTRACTORS (BID ID -3191290)

MAMTA ENTERPRISES (BID ID -3194660)

M/S MOHAN LAL GUPTA (BID ID -3195194)

Kanwal Nain Behl (BID ID -3192471)

M/S Shesh Paul Gupta (BID ID -3194459)