Construction of Science Lab, Art Craft Room, Library Room and Computer Room at Govt Higher Secondary School Bhagwah, Zone Bhagwah, District Doda

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : 60% all kinds of soil and 40% ordinary rock)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: ( 60% All kinds of soil and 40% ordinary rock)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40 mm nominal size) in retaining wall/return wall, columns etc. excluding cost of centering and shuttering , all work upto floor V level

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Providin.9 and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete.

Centnng and shuttering including strutting~ propping etc and removal of form work for.FoundatiOns footings. bases of columns R Wall

Centring and shuttermg including strutting, propping etc. and removal of form for· Suspended floors, roofs, landings, balconies and access platform.

Centnng and shuttering including strutting~ propping etc and removal of form work for.-Centnng and shuttering including strutting~ propping etc and removal of form work for columns

Centring and shuttermg including strutting, propping etc. and removal of form for· Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centring and shuttermg including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls. Under 20cms wide

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

12 mm thick cement sand plaster in 1:6 mix

6mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing glazed shutters for doors, windows- and clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary screws.

Decorative Ply wood 4mm thick

Providing and fixing 35 mm thick wire gauze shutters _,. using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50x12mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings I wooden frames with rawl plugs screws etc.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 60x60cm

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 6 mm thick

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Applying prinming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard or soft)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

White washing with lime to give an even shade. New Work (three or more coats)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Second class kail wood

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

Carriage 0f sand by Mechanical Transport including loading ,unloading and stacking complete lead up to 30km and head load lead upto 700m

Carriage 0f stone aggregates below 20 mm size by Mechanical Transport including loading ,unloading and stacking complete lead up to 30 km and head load lead upto 700m

Carriage 0f bricks by Mechanical Transport including loading ,unloading and stacking complete lead up to 200 km and head load lead upto 700m

Carriage 0f steel and cement by Mechanical Transport including loading ,unloading and stacking complete lead up to 30 km and head load lead upto 700m

Carriage 0f stone by manual labour including loading ,unloading and stacking complete lead up to 500m

UNIVERSAL GROUP OF ENGINEERS

M/S ALEX CONSTRUCTION