Civil work 6

Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth up to a distance of 30m. from the foundation trenches including all T&P. Sl no.-251

Concrete with 4cm. Gauge birck ballast, sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials labour and tools and plants including all complete. SI. No.- 273

M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. Sl No.- 305B

Providing 12 mm thick 1:3 Plaster with cement and coarse sand mortar. SI.No.-583

R.C.C work with cement, approved coarse sand & 2cm. Gauge approved stone grit in proproting of 1:2:4 e, The rate excludes making of dirp course which shall be paid extra. Slab PWD SI 284

Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work(when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level.. Sl No.- 504

Earth work filling with 4.00km caratage including all complete.

Construction fo granular sub base (GSB) by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per MORTH

Construction of un-reinforced, dowel jointed at expansinon and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weight batcher using approved mix, design, laid in approved fixed side formwork (steel channel), laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing spreading the concerste with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous opreaton including provision of contraction and expansion, constructionm joints, applying dedonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 dsys,

Construction of padustrial board of size 1.20x0.75m all complete.