Creation of UPS Battery Room including SITC of CCTV, Access Control, Gas Suppression System and VESDA system at Ground Floor, CBI HQ Building, New Delhi-110003

BOQ for UPS Room Ground Floor at CBI HQ Building New Delhi.

Digitally signed by AMIT

BOQ for UPS Room Ground Floor at CBI HQ Building New Delhi.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premouldedandprepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,

1 8.2 colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing

of edges to give high gloss finish etc. complete at all levels

8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

2 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

3 13.3 20 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even

and smooth complete.

coat including preparation of base surface as per recommendations of manufacturer to make the surface fire

6 8017 Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating meter 7 1,400.00 9,800.00

7 8018 Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire rating) including hinges ( without glass panels)

Dimenions-Width 1800 mm x Height 2100mm, Each leaf -900 mm width Fire rating 120 minutes sqm 4 7,000.00 28,000.00

8 9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed nos 2 1,124.85 2,249.70

on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Supplying and drawing of UTP 4 Pair CAT 6 LAN Cable in the existing surface/recessed Steel/PVC conduit as

LED Batten light (System lumen efficacy ≥105 85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating

1.9 temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection

,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical

circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K /

10 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching)

11 NDSR CCTV

Digitally signed by AMIT

Supply, Installation, testing & Commissioning of 4MP WDR IR Network Dome Camera image Sensor: 4 MP Progressive

Scan CMOS, Lens: Fixed , Resolution: Up to 2560x1440 @ 30fps

IR Range: Up to 30m, Day/Night Mode: Automatic with IR-Cut Filter, Video Compression: nos 2 5,714.09 11,428.17

H.265+/H.265/H.264+/H.264, Power Supply: 12V DC/PoE, Ingress Protection: IP67, Operating Temperature: -30°C to

A +60°C, Wide Dynamic Range (WDR), 3D Digital Noise Reduction (DNR), Smart Motion Detection

Supply, Installation, testing & Commissioning of 5 Channel Network Video Recorder,Channel Support: Up to 5

Channels, Storage Capacity: Supports up to 4 SATA HDDs (Max 1TB per HDD), Decoding Capability: 4K Decoding

for Ultra HD, Recording Resolution: 4K, 6MP, 4MP, 3MP, 1080p, 720p, Video Outputs: HDMI and VGA (4K support),

Network Ports: 1x RJ45 10/100/1000 Mbps

Power Supply: 100-240V AC, 50/60Hz, Operating Temperature: -10°C to +55°C, Dual-stream recording, Smart

B Search, Remote Monitoring via Mobile App

Supply, Installation, testing & Commissioning of Hard Disk 4 TB, Surveillance Internal Hard Drive HDD - SATA 6 Gb/s,

C 256 MB Cache

Supply, Installation, testing & Commissioning of 08 Port POE Gibabit Switch, 4-Port Gigabit Ethernet Unmanaged PoE

D Switch with 4 x PoE+ 60W Upgradeable

E Supply, Installation, testing & Commissioning of 18 Inch UHD Display nos 1 7,036.27 7,036.27

12 MR Installation of Access Control System

A Supply, Installation, Testing Commissioning of Door Access Control Panel With Enclosure Box. nos 1 22,369.49 22,369.49

B Supply, Installation, Testing Commissioning of HIDI Class Card Reader meter 2 11,376.92 22,753.85

C Supply,Installation, Testing Commissioning of EM Lock 1200 LBS Double leaf nos 1 3,190.15 3,190.15

D Supply,Installation, Testing Commissioning of Power Supply 12 V 3AMP nos 1 1,601.48 1,601.48

E Supply,Installation, Testing Commissioning of L Bracket nos 1 614.97 614.97

9 MR Supply , Installation and Testing fire door lock mordtise lock and Handle set ( including Accessories) nos 1 2,293.32 2,293.32

Digitally signed by AMIT

BOQ For EXHAUST SYSTEM FOR UPS ROOM AT GROUND FLOOR CBI HQ , NEW DELHI

Supplying, installation, balancing and commissioning of fabricated at site GSS sheet

metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows,

splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps,

collars etc as required complete in all respect in confirmation with IS : 655 and

approved drawings and specifications of following sheet thickness complete as

Site fabricated GSS sheet metal rectangular ducting as per IS 655 2006 for 1.00 mm

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers

but without volume control dampers complete in confirmation to SMACNA/IS and as

per specifications complete etc. as required.

3 30.2 FIRE DAMPER

Supplying, Fixing, testing and commissioning of fire dampers of minimum 90 minutes

fire rated in supply air duct/main branch and return air path as and where required of

required sizes i/c control wiring, the damper shall be motorized and spring return so as

to close the damper in the event of power failure automatically and open the same

in case of power being restored. The spring return action shall be inbuilt mechanism

and not externally mounted. The damper shall also be closed in the event of fire

signal and, in confirmation to IS and as per specifications complete etc. as required..

Digitally signed by AMIT

4 30.23 INSULATION

Supplying and fixing of following thickness duly laminated aluminium foil of mat finish

closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable

adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick

self adhesive nitrile rubber tape insulation complete as per specifications and as

5 3067 LOUVER

Powder coated extruded aluminium Return Air Grills with louvers but without volume

control dampers

Supply, installation, testing, and commissioning of Single Skin Cabinet Type Exhaust

Fan of approved make, conforming to relevant IS/CPWD HVAC specifications, having

6 MR a minimum air flow capacity of 4,000 CFM at 20 mm WG static pressure, complete NOS 1 125556.13 125556.13

with forward-curved centrifugal fan of size 10” × 10” (double discharge), dynamically

balanced impeller, and 1.5 HP TEFC motor, suitable for continuous duty, operating on

220 Volts, single phase, 50 Hz AC supply.

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

7 MR 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper. VFD upto 15 HP or NOS 1 153742.20 153742.2

as directed by the engineer in charge

Digitally signed by AMIT

DSR 2023 CIVIL WORK

Providing and fixing false ceiling at all heights including providing and f ixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,

at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and f inishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer’s specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board sq. m 50 1529.1 76455

Digitally signed by AMIT

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced

Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and

patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to

0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light

reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-

locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick

(galvanized @ 120 gram per sqm including both sides) comprising of

main-T runners of size 15x32 mm of length 3000 mm, cross - T of size

15x32 mm of length 1200 mm and secondary intermediate cross-T of size

15x32 mm of length 600 mm to form grid module of size 600 x 600 mm,

9 26.26 suspended from ceiling using galvanised mild steel items (galvanizing

@ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash

fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and

L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter

wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on

periphery wall / partition with the help of plastic rawl plugs at 450 mm

center to center and 40 mm long dry wall wood screws. The work shall

be carried out as per specifications, drawing and as per directions of the

Engineer-in-Charge.

With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged

GRG false ceiling tiles.

Digitally signed by AMIT

BOQ FOR SITC OF GSS at Ground floor UPS- Battery Room

GROUND FLOOR UPS ROOM

Gas suppression work and VESDA

Supply, Installation, Testing and Commissioning of 120 ltrs Seamless Cylinder with Valve with all

accessories( Pressure Guage +Low pressure supervisory switch,Low Pressure Connection Tee Cable,

Pneumatic actuator, Manual Actuator, Flexible Discharge Hose, Tee, Check Valve, Flexible

Actuation Hose, Pressure Switch for gas release input, Low Pressure Connection Unit, Connection

kit for End of Line, Elbow), Sinorix FK5112 gas, Electromagnetic Actuator, Discharge Nozzles Drilled

1 for 360 degree covereage, M.S. Seamless pipes as per ASTM A 106 Gr. B, schedule 40 with

necessary fittings, Manifold for Cylinders , Cylinder MOUNTING WLL CLAMP, DNE (Don’t Enter Gas

released) Sign board, GRE (Gas release Exit) Sign board, Gas Release Panel, Gas Abbort Switch,

Gas Relase Switch, Sounder cum Strobe with gas and all

accessories complete in all respect (Make: Firetrace, Tyco, Revoke Fire, Siemens, Honeywell, Pyrozone,

Kidee, Ansul, Life Guard, ASES)

Digitally signed by AMIT