Civil works

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls

a) Floor finish and dadooing walls in cement mortar with mosaic tiles/Glazod tiles/clay tiles/cuddaph slabs.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the University Engineer and clearing and levelling the site, etc., complete complying with standard specification and as directed by the University Engineer.

Cement Concrete 1:5:10 (one cement, five M sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the University Engineer.

Plain cement concrete 1:2:4 (one cement, two M sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the university Engineer.

BRICK WORK in cement mortar 1:5 (one cement and five crushed stone sand) using Fly ash bricks of size (230 X 110 X 70 mm) for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).

a) Foundation and basement

b) In Super structure Ground floor

c) Super structure first floor

Supplying fabricating L angles ISA of size 65x65x6mm thickness including welding works and over one coat of red oxide primer etc., complete complying with standard speciifcation and as directed by the University Engineer.

Flooring with ceramic tiles of size 0.30 x 0.30 x 6mm thick laid over 20 mm thick cement mortar 1:3 (one cement and M three sand) base mortar over the existing slab/floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg./sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by University Engineer before use on works)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (one cement and three M sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the University Engineer.

Plastering with Cement Mortar 1:3 (one cement and three crushed stone sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the University Engineer.

Plastering with Cement Mortar 1:5 (one cement and five crushed stone sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the University Engineer.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the University Engineer.

75mm thick slab (using 20mm HBGS Jelly)

Supplying and fixing position PVC Nahani Trap of the 100 x 75mm following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (one part of lime, two part of sand and five part of 40mm gauge brick jelly) and and finished with cement mortar 1:3 (one cement, three M sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the University Engineer before use on works)

Supplying and fixing in position best quality PVC soil / waste pipes of 75mm x 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC/MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the University Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.

a)75mm dia

a)110mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the University Engineer before use on works).

I) PVC ELBOW a)75mm dia

b) 110mm dia

II) PVC DOOR ELBOW a)75mm dia

b) 110mm dia

III) PVC TEE a)75mm dia

b) 110mm dia

IV) PVC TEE WITH SINGLE DOOR a)75mm dia

b) 110mm dia

Supplying, laying and jointing UPVC pipes (having working pressure 10Kg/sq.m) of approved quality and best variety confirming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work/cement concrete and plastering neatly wherever necessary with necessary scaffolding charges etc., complete complying with standard specifications. The UPVC pipe shall be got approved by University Engineer before use on works.

a) 50mm dia

b) 40mm dia

c) 32mm dia

d) 25mm dia

e) 20mm dia

f) 15mm dia

Supplying and fixing in position of UPVC specials of the following sizes of best approved quality including ost of necessary adhesive but excluding labour charges for fixing to walls and giving connection to the UPVC soil stacks, with necessary dismantling the brick masonry / RCC floor or roof slab and redoing the distrubed portions to original condition etc., complete complying with standard specification as directed by the University Engineer.

I) UPVC ELBOW a) 15mm dia

b) 20mm dia

c) 25mm dia

d) 32mm dia

e) 40mm dia

f) 50mm dia

II) UPVC THREADED ELBOW a) 20mm x 15mm dia

III) UPVC TEE a) 15mm dia

b) 20mm dia

c) 25mm dia

d) 32mm dia

e) 40mm dia

f) 50mm dia

VI) UPVC COUPLING a) 15mm dia

b) 20mm dia

c) 25mm dia

d) 32mm dia

e) 40mm dia

f) 50mm dia

VI) UPVC REDECER ELBOW a) 32mm x 25mm dia

b) 25mm x 20mm dia

c) 20mm x 15mm dia

VI) UPVC REDECER TEE a) 32mm x 25mm dia

b) 25mm x 20mm dia

c) 20mm x 15mm dia

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the University Engineer before use on work. Gate valve

a) 40mm dia

Supplying and fixing in position of Solid PVC DOOR SHUTTERS using 19 gauge 19mm MS Sq. tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size of styles shall be 50 x 30 mm. The overall size of top rail, lock rail and bottom rail shall be 75 x 30 mm. The overall size of frames sshall be 50 x 45 mm, with suitable rabate for housing the shutter etc., complete as directed by the University Engineer.

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one lime, two crushed stone sand and five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall/reinforced cement concrete roof/floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the University Engineer. (The water closet should be got approved by the UniversityEngineer before use on works).

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the University Engineer before use of work).

Painting two coats of old surface with ready mixed plastic emulsion paint of first class quality and of approved colour including through scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the University Engineer.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the University Engineer before use on works).

Supplying and fixing in position 15mm dia brass pvc screw down tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the University Engineer before use on the works).

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the University Engineer (The wash hand basin and specials should be got approved by the University Engineer before use on works).

Please Enable Macros to View BoQ information