Special repair of Washroom i/c Replacement of fittings and fixtures in Terminal Building at Civil Airport Jammu

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Providing and fixing Ist quality ceramic glazed decorative wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1 mm thick

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Providing and fixing CP Brass 32mm size Bottle Trap of Jacquar/ Hindware/ Cera or equivalent approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing of Liquid Soap Dispenser of Euronics make ES80A SS automatic wall mount with capacity 700 ml / Jaquar automatic soap dispenser Model SDR-BLC-DJ0160AS of capacity 800 ml with chrome finish or equivalent with all necessary fittings and fixtures required as per direction and satisfaction of Engineer-in-charge. This item includes dismantling of old/existing Liquid Soap Dispenser.

Providing and fixing 8 mm thick bevelled edge mirror of superior glass (of approved quality) fixed with minimum 4 no's of stainless steel spacers and washers complete, without any frame or backup board as per direction and satisfaction of EIC. This item includes removal/ dismantling of old/existing bevelled edge mirror.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 30 X 15 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin- charge Extruded section profile size 65x45 mm Providing and fixing of 39 mm thick factory made uPVC door shutters made of styles and rails of a uPVC hollow section of size 75x39 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of C section size 25x25 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of uPVC hollow section of size 75x35 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats.The shutter frame would be fixed on Aluminium rail of size 10x8 mm embedded in the floor.This frame will move on Aluminium rail with the help of two rollers. The shutter frame filled with a ACP panel having thickness of 5 mm wall thickness. The door arrangement shall contains powder coated aluminium handle on both sides of shutter, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing white wall hung European WC of Hindware make model 92590/Jaquar make Model ONS-WHT-10953BIUFSM/CERA make CAMEL RIMLESS S104467 or equivalent with soft close slim seat cover,hinges, accessories set, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction and complete satisfaction of Engineer-in-charge.: Item includes removal /dismantling of old/existing WC from the position.

Providing and fixing Control plate for in-wall WC tank Hindware model make PE-H 520401/CERA make model B1120101SF/Jaquar Model JCP-CHR-152415 or equivalent.Item includes dismantling of old/existing control plate with direction and complete satisfaction of Engineer-in-charge.

Providing and fixing Snow white Table top basin size 450X380X110 mm of CERA make model CATMIN S2020157 / Hindware make model 91094 of size 480x365x135 mm or equivalent, with waste coupling size 32 mm C.P. brass waste half threaded of standard pattern.This item includes dismantling of old/existing washbasin including cutting and making good the walls wherever require, complete fixing as per direction and satisfaction of Engineer-in-charge.

Providing and fixing Wall Hung Basin with half pedastal of Jaquar make model FNS-WHT-40801/CERA make model Concord S2040112 or equivalent i/c fixing accessories with waste coupling size 32 mm C.P. brass waste half threaded of standard pattern including cutting and making good the walls wherever require : This item includes dismantling of old/existing washbasin and complete fixing as per direction and satisfaction of Engineer-in-charge.

Providing and fixing infrared URINAL SENSOR CONCEALED TYPE FLUSHING VALVE with plate for existing urinal complete with installation box of make Euronics make model EU44E/Hindware make model F860066/Parryware model T471BA1 or equivalent i/c necessary fittings and fixtures.This item includes all necessary fittings , accessories and dismantling of existing sensor.

Providing and fixing SNOW WHITE URINAL complete set of /CERA make model Calcia S4020107 or equivalent with necessary accessories/fittings and fixing arrangements i/c cutting, chasing the wall etc. complete as per direction of Engineer-in-charge.This item includes all necessary fittings , accessories and dismantling of existing urinal and replacement with new urinal as stated above.

Providing & fixing bevelled tegular mineral fibre false ceiling tiles of size 595x595 mm of approved texture, design and patterns at all heights on existing frame of false ceiling tile having humidity resistance RH- 90% (exposure), Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) and NRC miniumum 0.50.This item includes removing the existing tiles, placement of new tiles,tightening of hanging clips and alignment correction of existing frame if required.The work shall be carried out as per specifications and as per directions of the Engineer-in-Charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile

Dismantling the work / granite in floors, walls and roofs laid in cement mortar including staking material outside Airport premises as per directionof E-I-C.

Providing and fixing counter mount long body sensor faucet with control box (Battery operated) of Euronics make ET12L or ET06L /Hindware make Flora model F240009 or equivalent of approved quality i/c necessary fittings and fixtures as per the direction and complete satisfaction of Engineer-in-charge.This item includes all necessary fittings , accessories and dismantling of old/existing Faucet and replacement with new Faucet as stated above.

Providing and fixing sensor faucet with control box (Battery operated) of Jaquar make Model SNR-51021/Hindware make F240005 or equivalent of approved quality as per the direction and complete satisfaction of Engineer-in-charge.This item includes all necessary fittings , accessories and dismantling of old/existing Faucet and replacement with new Faucet as stated above.

Providing and fixing of Health faucet IMP (ABS) with 1.2 m SS of HINDWARE make Model F160023CP/CERA make model F8030110AB or equivalent, of approved quality as per the direction and complete satisfaction of Engineer-in-charge.This item also includes all necessary fittings , accessories and dismantling of old/existing Health faucet .

Providing and fixing 100 mm Stainless Steel grating for gully trap.

Providing and fixing chrome finish bib cock of Hindware (Cat no. F340004) or Jaquar make : 15 mm nominal bore

Providing and fixing chrome finish angular stop cock with wall flange of Hindware (Cat no. F340006) or Jaquar make : 15 mm nominal bore

Providing and fixing of wall mounted ceramic washbasin for children of Hindware make odel 10077 or equivalent including necessary fittings and accessories.The requirement and specification will be provided by the department.This item includes washbasin and necessary accessories required as per direction and satisfaction of Engineering-in-charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing Tissue paper dispenser of Euronics make model EJ01or equivalent of approved quality for washrooms as per the direction and complete satisfaction of Engineer-in-charge.This item includes all necessary fittings , accessories and dismantling of old/existing paper holer also.

Providing and fixing SS 304 Cup Dispenser of Dolphy make model DPDR0029 or equivalent of approved quality for drinking water facility as per the direction and complete satisfaction of Engineer-in-charge.This item includes all necessary fittings and accessories.

Vipan Kumar Verma

Anil Kumar Sharma

M/S BAMRAL BUILDER

BJ CONSTRUCTION CO