PROVN OF COLLAPSIBLE GATES AND INTERLOCKING TILES IN KV SCHOOL AT JUTOGH CANTT

Amount

Excavation in trenches not exc 1.5 m wide and n.exc 1.5m in depth in Hard/dense soil complete all as specified and as directed.

Returning, filling in spreading and levelling and well ramming in layers not exc 25cm including watering for filling under floor complete all as specified and as directed.

Removing of excavated material (soils, etc) outside MoD land and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation fillings and mass concrete complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

M&L for 350 x250/450X350 x 6 to 7 mm thick glazed ceramic tiles, coloured, in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and incl 10 mm thick rendering in CM 1:4, finished even and rough to receive the tiles complete all as specified and directed.

S&F structural steel as in Joist channel, angle, MS pipe or tee sections fixed independently, without conneting plates etc structural steel conforming to Fe-410w, Gde- E-250 quality 'A' complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, over 10Cm width or girth including preparation of new steel or steel based surfaces, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil, comlete all as specified and directed.

M&L for 75mm thick, PCC 1:3:6 type C-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed

M&L for sand filling under floor or in foundation including spreading levelling in layers n exc 25 cm thick, well ramming, watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with gray cement and pigment complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in kerbs including necessary form work complete all as specified and directed.

M/S kuldeep kumar khullar

ADP Engineering

M/S Jaswant Kumar Aggarwal

M/S JOHN VASSELLY

M/S Meera Builders