REPAIRS/MAINT TO PLUMBING AND SANITARY FITTING AND ALLIED WORKS AT OMQ AREA, REPAIR/MAINT OF LT UG CABLE AND CONNECTED ITEMS IN TECHNICAL AREA AND REPAIR/MAINTENANCE AND CONVERSION OF OLD U/S ALUMINIUM WIRING TO FRLSH COPPER WIRING INCLUDING REPLACEM

Amount

Taking up or down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection 15mm bore in new or old position on wall/ceiling, complete all as specified and directed.

S&F GI steel water tubing and connection medium grade 15mm bore with all fittings, fixed to wall or in ceiling, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F GI steel water tubing and connection medium grade 20mm bore with all fittings, fixed to wall or in ceiling, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position on wall/ceiling, complete all as specified and directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union, complete all as specified and directed.

Supply and fix in repairs, angle stop valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or unions etc, complete all as specified and directed.

S & F in repairs 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs brass chromium plated shower roses 125mm size, complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back of size 550x 400 mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

S&F in repair CP pillar tap 15mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair PVC waste pipe for urinal/ WHB 32mm/40mm bore with one end with socket, complete all as specified and directed.

S&F in repair vitreous china squatting pan,"orissa pattern" white, size 580x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti-syphonage pipe, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal), white (EWC) including plastic seat of same colour of WC, closed patttern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and directed.

M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement for 75mm dia of outlet, complete all as specified and directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level, valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

PVC connection pipe 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S & F in repair towel rail, 60cm long PTMT including chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed..

M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L for providing glazed ceramic coloured tiles in vertical surfaces (450mm x 350mm/300mm X 450mm) X6 to 7mm thick set and in jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe including dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe including dismantling of old water tank, complete all as specified and directed.

S & F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms.), complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation or for pole/stay or cable trenches and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour, complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 75mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

M&L galvanized iron tubing 50mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and directed. (Note:- Excavation and earth work shall be measured and paid separately)

Taking down/out unserviceable UG cables of any cross sectional area and connections including bricks, GI pipes, etc of any descriptions, laid in trenches and/or fixed with walls/poles, complete all as specefied and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for 16 Sqmm 4 core, complete all as specified and directed. (Note:- Excavation and earth work shall be measured and paid separately)

All as per ser item No. 36 here in above but 35 Sqmm 3.5 Core, complete all as specified and directed.

All as per ser item No. 36 here in above but 95 Sqmm 3.5 Core, complete all as specified and directed.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15mm thick CRCA sheet alongwith both side cable alley of width not less than 300mm each side for termination of cable with provision for top and bottom cable entry mounting on 50x50x5mm angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at GCA sub station & Near 101 sqn sub stn :- INCOMING:- MCCB 400 Amps, AC 4 pole 415 Volt 36 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 microprocessor release range 160-400A, - 01 Nos with suitable rotary extendable handle for operation of MCCB of Make : L & T cat part No CM93003OOOOX1 or equivalent model of make Legrand/ABB/Schneider/Havells OUTGOING:- (i) MCCB 160 Amps, AC 4 pole 415 Volt 36 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 Microprocessor release range 63-160, - 03 Nos with suitable rotary extendable handle for operation of MCCB of Make : L & T cat part No CM92152OOOOX1 or equivalent (ii) MCCB 100 Amps, AC 4 pole 415 Volt 36 KA breaking capacity as per per IS/IEC 60947-2 & IEC 60947-2 Microprocessor release range 25-100A, - 02 Nos with suitable rotary extendable handle for operation of MCCB of Make : L & T cat part No DZ1F0100DXF1A or equivalent model of make Legrand/ABB/Schneider/Havells (iii) Isolator four pole 80 Amp - 04 Nos. of Make : L & T or equivalent model of make Legrand/ABB/Schneider/Havells (iv) MCB SPN 63 Amp - 08 Nos. of Make : L & T or equivalent model of make Legrand/ABB/Schneider/Havells (v) Digital voltmeter with all accessories for incoming of Make : AE or equivalent in L & T /Schneider/ ABB (vi) Digital ammeter with all accessories for incoming Make : AE or equivalent in /Schneider/ ABB (vii) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections of Make : AE, L&T, Schneider

Supply, fabricating, installing, testing and commissioning of outdoor type LT bus bar box of size not less than 900 mm (L) x 900mm (b) x 450mm (d) of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15mm thick CRCA sheet mounting on 40x40x5mm angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size cable glands, lugs etc, proper arrangement for ventilation, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of indoor type LT feeder pillar box of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 2mm thick CRCA sheet alongwith both side cable alley of width not less than 200mm each side for termination of cable with provision for top and bottom cable entry mounting on 50x50x5mm angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories at base OPS DG room & SRE DG room:- INCOMING:- (i) On load change over switch open execution type 4 pole 125 Amp, Frame size 0 with extended rotary handle, Make : Havells cat part No IHCNFO0125 model of make Legrand/ABB/Schneider/Havells (ii) MCCB 125 Amps, AC 4 pole 415 Volt 36 KA Breaking Capacity as per per IS/IEC 60947-2 & IEC 60947-2 Microprocessor release range 40-160A, - 01 Nos with suitable rotary extendable handle for operation of MCCB of Make : L & T cat part No DZ1F0160DXF1A or equivalent model of make Legrand/ABB/Schneider/Havells OUTGOING:- (i) MCCB 100 Amps, AC 4 pole 415 Volt 36 KA Breaking Capacity as per per IS/IEC 60947-2 & IEC 60947-2 Microprocessor release range 40-100A, - 02 Nos with suitable rotary extendable handle for operation of MCCB of Make : L & T cat part No DZ1F0100DXF1A or equivalent model of make Legrand/ABB/Schneider/Havells (ii) Isolator four pole 80 Amp - 04 Nos. of Make : L & T or equivalent model of make Legrand/ABB/Schneider/Havells (iii) MCB SPN 63 Amp - 08 Nos. of Make : L & T or equivalent model of make Legrand/ABB/Schneider/Havells (iv) Digital voltmeter with all accessories for incoming of Make : AE or equivalent in L & T /Schneider/ ABB (v) Digital ammeter with all accessories for incoming Make : AE or equivalent in /Schneider/ ABB (vi) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections of Make : AE, L&T, Schneider

M & L earthing with GI earth plate electrode of size 60cm x 60mm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 25 x 4mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20mm graded crushed stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering,40mm dia light grade GI pipe for lead protection in & including alternate layers of char coal dust and common salt complete all as shown in electrical plate No 5 and connected to earthing test point all as specified and indicated including testing on completion and marking of description of earthing on GI plate grouted on the earth chamber and including dismantling old u/s earthing of any description, complete all as specified and directed. Note : Cost of GI strip in suitable dia HDPE pipe and MS clamp from earthing to LT panel shall be included in the quoted rate.

Taking down carefully existing copper/aluminum point wiring including switch,socket,ceiling rose, conduit pipe, casing caping etc and removing materials from site and making good the disturbed surfaces of walls, floors etc, complete all as specified and directed.

M& L for point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including PVC casing caping of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick forone light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/fan at other end for one light point/one fan point/one bell/buzzer point controlled by one, one way swtich, complete all as specified and directed Note:- Unit rate include for cutting chases for sinking of boxes and making good to wall, floors etc.

All as per item No. 45 here-in-above but for one five pin switch-socket outlet, 5 Amps on the same board with other swiches including earth wire, complete all as specified and directed.

All as per item No. 45 here-in-above but for one five pin switch-socket outlet, 5 Amps on independent board, complete all as specified and directed.

All as per ser item No. 45 herein before but with 4.0 Sqmm PVC copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes, complete all as specified and directed.

All as per ser item No. 45 here in before but one light point controlled by two numbers 2 way switches, complete all as specified and directed.

S&F in repair of switch piano flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

S&F in repair of bell push, 230 volts white finish, complete all as specified and directed.

S&F in repair of switch socket outlet flush type 2 in 1,3 pin 5 Amp 230 volts white/ivory finish, complete all as specified and directed.

S&F in repair of switch socket multipurpose flush type 2 in 1 type (3 and 5 pin ) 5/16 Amps, 230V, AC white/ivory finish, complete all as specified and directed.

S&F in repair of switch piano flush button 5 Amp single pole 2 way 230 volts white finish, complete all as specified and directed.

S&F in repair of bell musical tune type AC, 230 volts, single phase, complete all as specified and directed. Make: Anchor Model No 22659 or equivalent in Havell's

S&F in repair ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed

S&F in repair and connecting up fan regulator electronic type on existing board 230 volts, suitable for ceiling fan 1200/1400mm sweep, complete all as specified and directed.

S&F in repair decorative angle type lamp holder, PVC/polycarbonate white/Ivory suitable for pendant fittings, complete all as specified and directed. Make: Anchor Model No 396793 for white/ 50971 for Ivory or equivalent in Havell's

Supply and fix LED lamp 9 watt, B-22 base, complete all as specified and directed. Make: Bajaj Model No : LEDZ Plus Bulb or equivalent in Philips/Crompton /Wipro/Havell's/Crompton

Supply and fixing LED lights fitting 1x 20 W, 220V,AC, with driver, LED rod complete connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose including taking down old u/s FTL fitting any type and wattage, complete all as specified and directed. Make: Bajaj Model No: BCLSB 10W NW or equivalent in Havell's/Crompton /Philips/ Wipro .

Supply and fixing LED lights fitting 1x 10 W, 220V,AC ,with driver, LED rod complete connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose complete including taking down FTL fitting any type and wattage, complete all as specified and directed. Make: Bajaj Model No: IVORA LED Batten 10 W CDL or equivalent in Havell's/Crompton /Philips/ Wipro .

Supply and fix MCB DB TPN 4 way IP 43 protection ,double door , concealed on wall, complete all as specified and directed. Make : Legrand /L & T/ Standard/Havell's/ABB

Supply and fix MCB DB SPN double door 12 way , IP 43 protection concealed on wall, complete all as specified and directed. Make: Legrand /L & T/ Standard/Havell's/ABB

Supply and fix MCB DB SPN double door 8 way , IP 43 protection concealed on wall, complete all as specified and directed. Make: Legrand /L & T/ Standard/Havell's/ABB

Supply and fix MCB DB SPN double door 4 way , IP 43 protection concealed on wall, complete all as specified and directed. Make: Legrand /L & T/ Standard/Havell's/ABB

S & F RCBOs for earth leakage, over load and short - circuit protection 32 Amp DP 100 mA, complete all as specified and directed. Make: Havells/Legrand/ABB/Schneider

Supply and fixing 240V, 10 KA 'C' series miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. Make: Legrand /L & T/Havell's/ABB

Supply and fix MCB SPN 6 to 32 Amp ,10 KA, 'C' series, complete all as specified and directed. Make: Legrand /L & T/Havell's/ABB

Supply and fix MCB 63 Amp 4 Pole,10 KA, 'C' series, complete all as specified and directed. Make: Legrand /L & T/Havell's/ABB

M&L for sub main wiring with two run of 4 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of 4 Sqmm single core PVC insulated unsheathed FRLSH copper earth continuity conductor including taking down old sub main wiring of any description, complete all as specified and directed. (Note : Two runs of 4 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping and accessories shall be measured and paid as one length).

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type ultra slim with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Bajaj / Philips/Crompton /Wipro/Havell's/Crompton

Supply and fix in repair LED 9 W inverter bulb B22 CDL, complete all as specified and directed. Make: Havell's Cat Part No.LHLDEGEDML8O009 /Bajaj Cat Part No : LEDZ Inverter Lamp 9 W Equivalent in Philips/ Wipro Note :- An amount of Rs.62278.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S P.K.AGARWALA

M/S. VINITA CONSTRUCTION

M/S ASHOK ENTERPRISE

M/S SANMILAN NANDI

M/S DEY ENTERPRISE

M/S ANNI ENTERPRISE

M/S RATHIN ENTERPRISES