Procurement of Furniture fo...

•Providing, supplying and placing of workstation chair with Cantilever Flex system, Three Position Back Tilt Limiter. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam and upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam and upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) •HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. •TILT MECHANISM, SPINES and SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The `S` shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. •ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. •PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . •PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . •TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. •Overall Dimensions of Chair •Seat Height - min 44.5 to max 53.8 cm. •Height - min 99.5 to max 108.8 cm. •Width and Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The product should be greenguard, GRIHA and IAQ certified

•Providing, supplying and placing of workstation chair with Cantilever Flex system, Three Position Back Tilt Limiter. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam and upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam and upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) •HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. •TILT MECHANISM, SPINES and SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The `S` shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. •ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. •PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . •PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . •TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. •Overall Dimensions of Chair •Seat Height - min 44.5 to max 53.8 cm. •Height - min 99.5 to max 108.8 cm. •Width and Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The product should be greenguard, GRIHA and IAQ certified

•Providing, supplying and placing of workstation chair with Cantilever Flex system, Three Position Back Tilt Limiter. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam and upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam and upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/W/) x 53.0 cm. (H) Seat Size : 48.5 cm. (W) x 49.0 cm. (D) •HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. •TILT MECHANISM, SPINES and SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The `S` shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. •ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. •PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm . •PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors . •TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. •Overall Dimensions of Chair •Seat Height - min 44.5 to max 53.8 cm. •Height - min 99.5 to max 108.8 cm. •Width and Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The product should be greenguard, GRIHA and IAQ certified

Providing and placing desk based Recta workstations - 1200W X 600D with System height - 1050 mm with tolerance of ± 10 mm, with pedestal, cpu trolley and KBPT. •The partial 8mm thick Laminated glass marker screen. Available in 450mm ht., mounted on Studs. •Providing metal powder coated leg.. Legs are of metal powder coated with standard workstation height of 750mm. •Under structure comprising of metal powder coated cross connectors between legs and legs and made up of metal powder coated finish and the entire assembly is fixed to the worktop. •For vertical wire management, wire risers with cover are considered. •For horizontal wire management - Wire Tray with integrated power box . Access flap cover will be provided. Switch plate of (8 plus 3 ) module is considered for Power and Data points. •The worksurface is of 25 mm thick prelaminated particle board with flat pvc lipping edge banding of size 1200 mm w x 450mm d ( both side ). •The modesty should be Lazer cut perforated Metal and mounted on the worktop with the help of the modesty mounting brackets. Modesty terminates at 400 mm from ground. The product shuld BIFMA level 2 , greenguard, GRIHA and BIFMA compliant certified.