Providing P.W.S.S. for Salve/Sasewadi, Tal. Patan, Dist. Satara

Sub Estimate - Rising Main

Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984/14151/12786/ 13488 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc.

63 mm dia HDPE Pipe PE- 100- 8 kg/cm2

MJP DSR 23/24, 123/1A

Item No.2-Providng and supplying Idouble flange Sluice valves confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps including all taxes transportation etc.complete.

50 mm dia sluice valve PN-1

50 mm dia N.R. valve PN-1

MJP DSR 23/24, 145/2

Item No.3 -Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 mtrs. and lifts as below, stacking and spreading as directed, normal dewatering,preparing the bed for foundation and excluding backfilling etc.complete.

MJP DSR 23/24, 37/3

Item No.4 - Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

MJP DSR 23/24, 38/7

Item No.5 - Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test.

63 mm dia HDPE Pipe PE- 100- 8 kg/cm2

MJP DSR 23/24, 125/2

Item No.6 - Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position.

63 mm dia HDPE Pipe PE- 100- 8 kg/cm2

MJP DSR 23/24, 126/3

Item No.7- Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

50 mmdia sluice valve PN-1

50 mm dia N.R. valve PN-1

MJP DSR 23/24, 148/4

Item No.8 - Giving satisfactory hydraulic testing of following C.I.D / F Reflex Valves, Butterfly valves and Sluice Valves.

50mmdia sluice valve PN-1

50 mm dia N.R. valve PN-1

MJP DSR 23/24, 148/4b

Item No.9-Providing, supplying and fixing Air valves as per IS-10845 amd MJP's standard specifications of approved make and quality of following diameters including all taxes(central and local), railway freight, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/site, unloading, stacking etc.complete.

12/15 mm dia Air valve 760+149+14.90

MJP DSR 23/24

Item No.10 - Providing and laying in situ cement concrete mortar 1:2:4 of trap metal for foundation and bedding including bailing out water manually formwork compacting & curing etc. complete.

MJP DSR 23/24, 47/1b

Item No.11 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

MJP DSR 23/24, 40/15

Item No.12 - Filling in plinth and floor Murum bedding in trenche with approved murum from excavated materials from foundation in 15 to 20 cm layers including watering and compaction etc. complete.

MJP DSR 23/24, 41/16

Item No.13 :- Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.

50 mm dia Medium 413+81+8.10

Pumping Machinary

Item No.1 - Providing installing, commissioning and testing of submerssible pump set LPM discharging water against a total head of m from all causes when running at 2900 RPM (Approx) directly coupled to submotor squrrel gage induction type of adquate capacity as per detail specifications.

3.00 HP, 3 Phase

Item No.2 - Providing, erecting , commissioning & testing of floor mounting type L.T. pannel board (skeletion type) as per detail specifications.

Item No. 3 -Providing erecting, jointing & testing of required size M.S.D/F specials & pipe & flanges tubes etc.complete as per detail specifications.

Item No. 4 - Providing installing and commissioning with test & trial Pr. guage arrangement having range about 15 kg / cm with syphon tube etc. complete.

Item No. 5 -Providing laying, jointing and testing of PVC water proof sub cable copper conductor of type ( 1x 3 x 4) sqm size as per detail specifications.

Item No.6 -Providing laying & testing of PVC allu. conductor armoured cable (1x3x4) core size & as per details specifications.

Item No.7 - Providing and testing varnished plank 20 mm thick fixed towall or on provided pannel board for fitting MSEB connection with necessary materials supports etc. complete.

Item No.8-Providing, installing, testing, earthing arrangement to installation of motor, L.T. pannel board starter etc. complete as per details specifications.

Item No.9 - Providing and lowering, laying and jointing in position Vertical Drop pipe etc. complete. as directed by Engineer & as per specification complete.

Chabutara & HDPE Tank

Item no1:- Excavation for foundation / pipe trenches in Hard murum &boulders, W.B.M. road including removing the excavated materials upto a distance 50 meter beyond the area and lifts as below, stacking and spreding as directed by Engineer - in - charge, normal dewatering, preparing the bed for foundation and excluding back filling, etc. complete.M.J.P.DSR 31/3

Item No.2:- providing &laying in situ p.c.c. 1:2:4 of trap metals for foundation & Plinth including compaction curing form work etc.complete M.J.P.DSR 37/1b

Item No.4:--Providing laterite stone masonry in cement mortar 1:6 in Foundation and plinth including striking joints on the unexposed faces and watering and watering complete.

Item No.5:-Providing laterite stone masonary in c.m.1:6 in Superstructure including striking out joint on the unexposed facesand watering complete.

Item No 6 :- Providing and hoisting in position high density Polyethlene UV Stabilised double layers confirming to I.S. 12701 water storage tank with necessary connection testing etc complete.

PWD DSR 22/23, 1430/42.54

Item No.7 :- Providing Internal Cement Plaster 12 mm thk. In single coat in cement mortar 1:3 without neeru finish to surface in all position including scaffolding and curing etc. complete.

PWD SSR 22/23, 963/32.04

Item No.8 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

A) Material Section

Item No.1:- Providing ISI mark G.I. pipes of following class and diameters including all local and central taxes, octroi, inspection charges, transportation to stores, etc.complete.

80 mm dia Medium

MJP SSR 23/24,

Item No.2 - Providng and supplying Idouble flange Sluice valves confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps including all taxes transportation etc.complete.

80 mm dia sluice valve PN 1

B) Labour Section

Item No.1-Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and antitermite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.

Salve Gaothan ESR 6 m St. Ht. 20000 Lit.

Distribution System

Item No.1 -Providing & supplying in standard lengths polyethelene Pipes, conforming to IS 4984/14151/12786/ 13488 with necessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint, including all local & central taxes, transportation and freight charges inspection charges, loading/unloading charges, conveyance to the departmental stores/ site & stacking the same in closed shade duely protecting from sunrays & rains, etc.

63 mm dia HDPE Pipe PE- 100- 6 kg/cm2

MJP DSR 23/24, 123/1A

Item No.2-Providng and supplying Idouble flange Sluice valves confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps including all taxes transportation etc.complete.

50mmdia sluice valve PN-1

MJP DSR 23/24, 145/2

Item No.3 -Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 mtrs. and lifts as below, stacking and spreading as directed, normal dewatering,preparing the bed for foundation and excluding backfilling etc.complete.

MJP DSR 23/24, 37/3

Item No.4 - Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

MJP DSR 23/24, 38/7

Item No.5 - Lowering laying & jointing H.D.P.E. Pipe by heating to the ends of pipe with the help of tefflon coated electrimirror/heater to the required temparature & then pressing the end together against each other to form a monolithic & leak proof joint by thermosetting process. the pressing may be required to be done with Jack/Hydraulicjack/Vutt fusion machine etc. complete. with all maerial,labours as directed by Engineer in charge including given satisfacory hydraulic test.

63 mm dia HDPE Pipe PE- 100- 6 kg/cm2

MJP DSR 23/24, 125/2

Item No.6 - Hydraulic testing of H.D.P.E. Pipe to specified pressure including cost of all materials and labourand water for testing for specified length incluiding cutting placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to providespecified test pressure gauges and other necessary equipments, labour, operation charges, etc required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to origenal position.

63 mm dia HDPE Pipe PE- 100- 6 kg/cm2

MJP DSR 23/24, 126/3

Item No.7- Lowering, laying and jointing in position following C.I.D./F. sluice valve including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.

50mmdia sluice valve PN-1

MJP DSR 23/24, 148/4

Item No.8 - Giving satisfactory hydraulic testing of following C.I.D / F Reflex Valves, Butterfly valves and Sluice Valves.

50mmdia sluice valve PN-1

MJP DSR 23/24, 148/4b

Item No.9-Providing, supplying and fixing Air valves as per IS-10845 amd MJP's standard specifications of approved make and quality of following diameters including all taxes(central and local), railway freight, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/site, unloading, stacking etc.complete.

12/15 mm dia Air valve 760+149+14.90

MJP DSR 23/24

Item No.10 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

MJP DSR 23/24, 40/15

Item No.11:- Providing 15 mm dia. Functional Household Tap Connection (FHTC) from water distribution system including 15 mm dia. Pipe of following class ferrule, saddle piece, & other necessary specials like elbow, coupler including necessary excavation in all type of strata, refiling and giving satisfactory test etc.complete.

i) Without Roadcrossing

MJP DSR 23/24, 62/1

Item No.12 :- Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.

80 mm dia Medium 689+132+13.20

65 mm dia Medium 524+118+11.80

Item No.13 :- Providing and fixing Name Board of the work showing details of the scheme. etc complete.