GE S U 47 2022 23 ADDN ALTN TO ROOF FLOORING FALSE CEILING TOILET

Amount

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar, or cement line mortar including all quoins, arches pillars etc complete all as specified and as directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members at roof blankets complete all as specified and as directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits\trusses\bracking supporting hanger compressing of GI wire complete all as specified and as directed.

4 mm thick 600mm x 600mm size asbestos cement plain E-boards designer ceiling (Make; Everest of equvalent as approved by GE), fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as specified and as directed.

Dismantling Asbestos cement (corrugated or semi corrugated ) sheets as in roof covering complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , eves/facia board work fixed with self tapping screws complete all as specified and as directed.

Anti-termite treatment of the soil under plinth protection at the rate of 5 ltr of emulsion per square metre of surface complete all as specified and as directed.

Providing and injecting Along the external wall below concrete or masonry apron using Antitermite Treatment chemical emulsion @ 2.25 litres per running metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar any description complete all as specified and as directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:4 complete all as specified and as directed.

Rendering 15 mm thick in CM 1:6 on brick work and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in CM 1:4 on brick work and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick in CM 1:3 on ceiling, chajja, roof projection etc finished fair and even without using extra cement complete all as specified and as directed.

01mm thick wall care putty on wall or ceiling surfaces complete all as specified and as directed.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Preparation of walls or ceiling surfaces of new/old and applying two coat of plastic emulsion paint (Shade to be approved by GE) complete all as specified and as directed.

75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mm x 600mm x 7mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc, complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in level course on floor etc complete all as specified and as directed.

Double charged glossy finish Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Double charged glossy finish Vitrified tiles dark Shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm but not exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No 27 here in before but vertical surfaces as in skirting, dado etc complete all as specified and as directed.

18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

Cement concrete 1:3:6 type C-2, 75 mm thick (using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even with using extra cement complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm unframed work and over in section, in any position complete all as specified and as directed.

Rolled section as in main and cross beams , hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding gates , doors fixed with angle cleats or other connecting plates complete all as specified and as directed.

Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

4 mm dia galvanised steel wire 150 mm x 100 mm mesh made up in to matresses or cages etc complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primmer complete all as specified and as directed.

Anodised aluminium Partition, ventilator shutters, window/ fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg complete all as specified and as directed.

Aluminium body heavy duty double action floor spring suitable for glass shutter at both side rotable complete all as specified and as directed.

GI pipe medium grade15 mm bore in wall and ceiling or laying in floors, including new fittings as required at site including taking down of old GI tubing with conections complete all as specified and as directed.

GI pipe medium grade 20 mm bore in wall and ceiling or laying in floors, including new fittings as required at site including taking down of old GI tubing with conections complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 500 ltr (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 1000 ltr (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.

PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes complete all as specified and as directed.

Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore complete all as specified and as directed.

18/19mm thick plywood grade BWR ,type BB fixed with screws to timber frame work complete all as specified and as directed.

0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed.

Pressed steel frame size 125mm x 60 mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

All as per Srl item No 48 above but glazed and skeleton shutter with sash bar for glass / wire gauge(stainless steel wire cloth shall be measured separetly) complete all as specified and as directed.

First class hard wood plain solid straight chowkats and frames and Design main doors Pannel shutter with wrought framed on the solid rounded or chamfered put together with glue and pinned at joints including preservative treatment complete all as specified and as directed.

150 mm brass barrel tower bolts,with cast or sheet and rolled or cast bolts complete all as specified and as directed.

Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts 300 mm complete all as specified and as directed.

125 But hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type C-12 complete all as specified and as directed.

150 mm length Brass handles, cast type, polished bright Extruded brass handles, fabricated type polished complete all as specified and as directed.

Preparing new/old wooden surface & applying two coats of synthetic ennamel paint over a coat of pink primer over 10cm width or girth complete all as specified and as directed.

Roughening surfaces of concrete floor by picking sweeping cleaning & washingg down with water to remove dust etc including removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete all as specified and as directed.

Rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, and drop facia finished the surface fair and even with out using extra cement complete all as specified and as directed.

Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats of bituminious alluminium paint complete all as specified and as directed.

110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

Powder coated Aluminium partition frames for doors, windows, ventilators with one or more rebates annd aluminium window and ventilator shuttter frames jointing cleats for fixing and partation wall frame etc complete all as specified and directed thickness of powder coating not less than 50 micron complete all as specified and as directed. Note : Powder coated aluminium coating colour is approved by GE.

Supply and fixing 750mmx450mm Urinal partition made up of 10mm thick glass duly sand blasted including stainless steel holding clamps, complete all as specified and as directed.

Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/rubber beads in square exc 0.5 Sqm in each pane complete all as specified and as directed.

12 mm thick toughened glass partition and similar work with fixing of stain less steel clit/stain less steel clamp and fixing aluminium frame wall and floor complete all as specified and as directed.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified and as directed.

Curtain rod anodised alluminium alloy of chromium plated with fixing brackets, rollers etc complete all as specified and as directed.

15 mm dia Bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

15mm dia stop valves fancy type chromium plated with long shank and cup (concealed type) , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off from shutter) exc 1.5 Sqm and n exc 4 Sqm each complete all as specified and as directed.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete all as specified and as directed.

Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC sheet fillets complete all as specified and as directed.

PVC moulded door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and as directed.

Moulded factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site complete all as specified and as directed.

Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed.

150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

150 mm length Aluminium handles fabricated type anodised complete all as specified and as directed.

150 mm brass barrel tower bolts,with cast or sheet and rolled or cast bolts complete all as specified and as directed.

Powder coated 15 micron aluminium door of approved design complete all as specified/directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and , aluminium Powder coated tower bolts 200 mm long (03 Nos on each shutters) and 5mm thick tinted glass pane of glazed shutter along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium sesction comprising of :- (Size of the door shall be as per site requirement) (a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM.. (b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM. (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM. (e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. The actual measurement shall be taken, wastage shall be including in the rates, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extrution. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also.

Aluminium powder coated frame , window shutters (glazed ,wire gauge and grill) side hung with aluminium window frame or chowkat 1.5 mm thick aluminium powder coated of size 100 mm x 44.5 mm and window shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 1.5 mm thick aluminum powder coated of size 44.5x44.5 mm including powder coated aluminium grill 50mm x 50mm aparture and all fitting such as rubber gasket, aluminium glazing clips locking cabinet, 4 mm thick tinted glass pane for glazed shutters, stainless steel wire mesh for gauge shutter and hook and eye for each shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos each shutter, aluminium butt hinges 75 mm 02 Nos in each shutter aluminium handle 100 mm 01 No in each shutter inc all accessories complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base for receiving floor finishes finished even and fair complete all specified and as directed.

25mm thick PCC type B-0 (using 20mm graded crushed stone aggregates) as in sub base for laying floor finishes complete all as specified and as directed.

15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and as directed.

Dura stone heavy duty vitrified tiles of size 300mm x 300mm and 9.5mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregates), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n.exc 10 Sqm on plan and getting out in any type soil complete all as specified and as directed.

Cement concrete (1:4:8) type D 2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concerete complete all as specified and as directed.

SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D-2 for 150mm dia pipe complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed. (Note:- reinforcement will be measured and paid seperately.)

Mild Steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

110mm bore (SWR) vent cowl complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil/debris to a distance exc 50m and nexc1.50 km out side defence land complete all as specified and as directed.

10-12 mm thick gypsum boards seam less false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and as directed. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer

Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc, and necessary fittings complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Cement concrete 1:2:4 type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

Mild steel TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with M.S wire annealed not less than 0.9mm dia complete all as specified and directed. (Note : Site for brick work may involve head load , contractor shallhave no claim on extra labour incurred in this account)

All as per srl item No102, but 5mm dia and over up to and including 10mm dia as in stirrups complete all as specified and as directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and as directed.

PCC 1:2:4 B-0 (using 12.50mm graded crushed stone aggregates) for coping, corner of roof and similar work complete all as specified and as directed.

Hard core of guage n exc. 63 mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

Sand cushioning/filling under gloors or laying as per site requirement complete all as specified and as directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in level course on roof surface 25mm thick etc complete all as specified and as directed.

Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polisheing types complete all as specified and as directed.

Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

1.25 mm thick plain black mild steel sheeting in ridges hip , valley gutters drip. Bottom of roofing and gutters and straight flashings (Length and girth as fixed) complete all as specified and directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed. Keeping the LED lights in safe custody.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. Make:Havells/polycab/Finolex

All as per srl item No 120, but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

All as per srl item No 120, but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

All as per Srl item No 120, but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and directed.

All as per srl item No 120, but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed. Make: Havells/ Legrand/Indoasian Elvira

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and directed. Make: Havells/ Legrand/Indoasian Elvira

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed. Make: Havells/ Legrand/Indoasian Elvira

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed. Make: Havells/ Legrand/Indoasian Elvira

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and directed. Make: Havells/ Anchor/Indoasian

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and directed. Make:- Havells/ legrand/ Indo Asian.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make - Havells/ Wipro/Syska

S&F in replacement 36W (2' x 2') LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed. Make - Havells/ Wipro/Syska

Supply and fixing LED luminaire 15 watt, 220 V AC recess mounted down lighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. Make- Havells/ Philips/C&S.

Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

S & F replacement MCCB Triple Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately) Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make:- Havells/ legrand/ Indo Asian.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make:- Havells/ legrand/ Indo Asian.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sqmm as earth lead complete all as specified and directed Including taking down old sub main wire. Make:Havells/polycab/Finolex

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and directed Including taking down old sub main wire. Make:Havells/polycab/Finolex

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and directed. Make:- Havells/ legrand/ Indo Asian.

Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling, greasing, one coat of synthetic enamel white spray painting with blade, reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring complete all as specified and directed. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed. Make:Havells/Bajaj/CG

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and directed. Make:Havells/Bajaj/CG

Supply and fixing ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection complete all as specified and directed. Make:Havells/Bajaj/CG

Earthing complete with galvanized steel earth plate electrodes 600 mm x 600mm x 6.3mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board complete all as specified and directed and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base, with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size as in repairs complete all as specified and directed.

Switch 6 Amps single pole one way with outer strip complete all as specified and directed. Make: Havells (Crabtree) / Legrand/ Philips

Socket 3 Pin 6 Amps flush type Type) with outer strip complete all as specified and directed. Make: Havells (Crabtree)/ Legrand/ Philips

Sheet metal enclosure double door type for DBs (when MCB to be used) 4 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole and neutral 240 volt any rating from 40 Amps "C" series, with rupturing capacity 10 KA, inculding providing thimble for out going cable complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

Supply and fixing LED lights fitting 1x 22W, 230V, AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make - Havells/ Wipro/Syska

SINGH CONST CO

JINDAL BUILDERS

RAJ MOHD

VIRINDER SINGH

AKBAR FURNITURE HOUSE AND TIMBER MERCHANT

PARDEEP SHARMA