REPAIR TO ALUMINUM DOORS AND WINDOW, FALSE CEILING, WALL PANELLING AND MISC BR WORKS UNDER AGE BR-III OF GE (A) JAISALMER

Amount

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutter (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed by Engineer-in-charge.

Taking down shutters of any description n.exc 1 sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed by Engineer-in-charge.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but n.exc. 2 sqm each complete all as specified and directed by Engineer-in-charge.

Resecuring or easing and adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engineer-in-charge.

M&L for powder coated Aluminium frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge.

M&L for powder coated aluminium window and ventilator shutters,fixed type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc complete all as specified and directed by Engineer-in-charge.

M&L for powder coated aluminium door shutters,aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips rubber neoprane packing, handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-charge.

S&F, 4mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes and including hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

S&F solar control film 50 micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified and directed by Engineer-in-charge.

S&F in repair mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-charge.

S&F in repair 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer-in-charge.

S&F in repair 100mm mild steel 4 Levers mortice lock vertical type complete all as specified and directed by Engineer-in-charge.

S&F in repair Aluminium (Die cast) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg complete all as specified and directed by Engineer-in-charge.

S&F in repair 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-charge.

S&F in repair 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixed in repair aluminium handles, cast type, anodised 150 mm size complete all as specified complete all as specified and directed by Engineer-in-charge.

Dismantling boarding of any description fixed in any position with nails complete all as specified and directed by Engineer-in-charge.

M&L for 12mm thick Plywood,grade BWR type BB fixed with nails, complete all as specified and directed by Engineer-in-charge.

M&L for 18/19mm thick prelaminated particle board interior grade,one side laminated with decorative choice and other side balancing white lamination fixed with screws to timber frames work for shutters of ward robes, cabinets etc complete all as specified and directed by Engineer-in-charge.

S&F in repair 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work fixed in any position complete all as specified and directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified and directed by Engineer-in-charge.

S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long and including 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.

M&L preparation of new plastered surfaces of ceiling and applying two coat of distemper oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame work and similar work as per specifications and drawing complete all as specified & directed by Engineer-in-charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles joint less dark shade of size 450mmx300mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-charge.

M & L Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-charge.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-410-W(Gde-E-250) of quality B complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Dismantling of plain or corrugated steel sheets in roof coverings complete all as specified and directed by Engineer-in-charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 455 gms) complete all as specified and directed by Engineer-in-charge.

S&F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball vallves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) and including taking down existing tank of any description complete all as specified and directed by Engineer-in-charge.

S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball vallves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 15mm-142gms /20 mm- 210 gms/ 25mm-455gms/ 40mm - 690 gms) and including taking down existing tank of any description complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs wall mixer with 'L' bend provision of OH shower of brass chromium plated, glosy finish for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified and directed by Engineer-in-charge.

S&F in repair 15 mm Stop/ Angle valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F in repair European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-charge.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets complete all as specified and directed by Engineer-in-charge.

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S & F in repair vitreous china wash basin white flat back size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket etc complete all as specified and directed by Engineer-in-charge.

S&F in repair 15mm dia pillar taps cast copper alloy with capstan head fancy type chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china urinal, half stall type, complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement, incl grating union for discharge pipe etc complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing 15mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing 20mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc including taking down existing GI pipe of any description complete all as specified & directed by Engineer-in-charge.

Demolition of Brickwork or stone/ boulderblock masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathingof stone masory surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L rendering 15mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall externally and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc, all as spfd and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing complete all as specified and directed by Engineer-in-charge.

M&L providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge.

M&L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone, copings, bed plates, water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed by Engineer-in-charge.

JASOL MAA ENTERPRISES

M/s Shri Inder Construction Company

M/S R B CONSTRUCTIONS

M/S SHRINARAYAN MEENA

GEMRARAMCONTRACTOR

AMBEY MAA CONSTRUCTION COMPANY