REPAIR MAINT OF INTERNAL WIRING AND CONVERSION OF ENERGY EFFICIENT LED LIGHT AT 44 WEU(B) ANUPGARH UNDER GE(AF) SURATGARH

Amount

BOQ (REPAIR/MAINT OF INTERNAL WIRING AND CONVERSION OF ENERGY EFFICIENT LED LIGHT AT 44 WEU(B) ANUPGARH UNDER GE(AF) SURATGARH.)

Taking down DB/main switch of any size and making good disturbed surfaces of wall/floor, complete all as specified and directed by Engineer-in-Charge. Note - Temporary power supply shall be provided by contractor.

Taking down unserviceable submain wiring and making good disturbed surfaces of walls/ floor etc matching with the existing surface, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminum point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surfaces of wall/floor, etc. complete all as specified and directed by Engineer-in-Charge. Note :- Temporary power supply shall be provided by contractor.

M&L for Sub main wiring (concealed ) with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonary including 25 mm dia non-metallic PVC conduit fixed in wall including 2.5 sq mm copper earth continuity wire, accessories and connecting to earth dolly, complete all as specified and directed by Engineer-in-Charge. Note :- 2 runs of 4 Sqmm, 1 run of PVC conduit & 1 run of 2.5 Sqmm cable shall be measured as single unit length.

M&L for Sub-main wiring (concealed) with two single core 6 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masnory including 25mm dia non metallic PVC conduit fixed in wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly , complete all as specified and directed by Engineer-in-Charge. Note :- 2 runs of 6 Sqmm & 1 run of 4 Sqmm cable and 1 run of PVC conduit shall be measured as single unit length. Note for item No.3 to 5 :- The disturbed surfaces of wall for concealing the wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces.

M& L for Point wiring (concealed) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn through in and including non metallic heavy duty rigid PVC conduit accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls/floors/ceilings etc by cutting chases using machine and making good the disturbed surface, with and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulator with white or any colour plate and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following, complete all as specified and directed by Engineer-in-Charge:-

One light/ceiling fan/exhaust fan point controlled by one switch.

One switch socket outlet 3 pin 5 amp on same board.

One 3 pin socket outlet, 5 amps point on Independent board.

All as per item No 6 above but 4 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board.(AC/Geyser), complete all as specified and directed.

M& L for Point wiring (concealed) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 2.5 sq mm (nominal area) multi stranded copper conductor cable drawn through in and including non metallic heavy duty rigid PVC conduit accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls/floors/ceilings etc by cutting chases using machine and making good the disturbed surface, with and including flush type metal boxes modular type suitable for fixing modular switches, sockets fan regulators etc with white or any colour plate with 2.5 sq mm copper earth continuity wire connected to earth dolly complete for the following, complete all as specified and directed by Engineer-in-Charge:-

one 3 pin socket out let 15 Amps on same board,

Note for Item No. 6 to 7 :- The disturbed surfaces of wall for concealing the wiring shall be made good by applying cement plaster, putty and colour wash etc to match with the existing surfaces. The quted rate shall include for the same.

Taking down old U/S light fitting and S&F 20 Watt LED Luminarie decorative box type fitting inlcuding LED tube with blue coloured end caps pre wired for LED tube energy saving with high effiicacy PMMA diffuser gives soft glare free light with available lumen output from 2000 total lumen. The lamp shall be 1200 mm length with G13 base. The 20 Watt system shall be operating at 220-240V AC supply having internal driver, IP 20, surge protection 2 KV, ambient temperature -20 to 45 degree C, freequency 50 to 60 Hz, The system effiicacy must be between 80-100 lumen/watt, with 70% lumen maintenance up to 40000 burning Hrs with uniform visually comfortable light output at 150 degree beam spread, CRI minimum 80, PF should be greater than 0.95, THD <10%. Indivisual LED should not be visible for glare free output colour temperature 6500K filled on & including 2 Nos PVC block of suitable & connecting up to tube light fitting with connecting up with copper 3 core flexible white cord of min size 0.5 sqmm, complete all as specefied and directed. Make : Crompton Cat Part No LDL-20-CDL, or equivalent Havells/Surya/Syska LED.

Taking down old U/S light fitting and Supply, installation, Testing and commissioning of LED Bulk head 10 Watt with a nominal system lumen output of 600 lumens and a minimum system effiicacy of 60 lm/W. The luminarie shall have a rated system lifetime of 50,000 burning hours at L70. The luminarie should have a color temperature of 6500K and CRI > 70. The luminarie shall meet IP 66 rating and IK 09 rating with THD < 20% and PF >0.9. The luminarie housing should made of high pressure die cast aluminium with polycarbonate front diffuser. The total power consumption should not exceed 10W complete all as specefied and directed. Make : Crompton Cat Part No LBHP-10-CDL, or equivalent Havells/Surya/Syska LED.

S&F LED bulb 12 watt with lumen 560, complete all as specified and as directed by Engineer-in-Charge. Make: Surya Cat No 12W LED 6500 K or equivalent in CG, Wipro & Philips.

S&F Angle holder, PVC Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, including connecting and testing, complete all as specified and directed by Engineer-in-Charge.

S&F Step 0-4, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, complete all as specified and directed by Engineer-in-Charge.

S&F Socket modular type single pole one way 6 Amps 2/3 pin 250 volts including taking down the old modular socket, complete all as specified and directed by Engineer-in-Charge.

S&F Switch modular type, single pole one way 6 Amps, 250 volts AC suitable for modular switch boxes without indicator, complete all as specified and directed by Engineer-in-Charge.

S&F Socket modular type 16 Amps, 3 pin combine, 2 module,240 volts , complete all as specified and directed by Engineer-in-Charge.

S&F Switch modular type 16 Amps, 1 module,240 volts, complete all as specified and directed by Engineer-in-Charge.

S&F Sheet metal enclosure with socket plug top single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amps , 240 Volts, complete all as specified and directed by Engineer-in-Charge.

S&F Sheet metal enclouser for DB's incorporating MCB's TPN 4 way IP-43 double glazed door with 200 Amps rated busbar, 415 Volts, as per IS-8623 including taking down old unserviceable DB's, complete all as specefied and directed.

S&F Sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623, fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F MCB four poles, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40 amps 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP, 6 to 32 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc fixed in repair complete all as specified and directed by Engineer-in-Charge.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s Rohit Construction Co.

DASHMESH ENTERPRISES

M/s JUGAL KISHORE MISHRA AND SONS