Providing New borewell, Erection of 10 HP submersible motor, Panel Board, Column Pipe, 3 core 6 Sqmm Cable and Laying of 90mm HDPE pipe line works for Water Supply at Ward No. 26 Parvathi Nagar in Hosur City Municipa

Investigation of Geological survey for finding yield test

Drilling 150mm dia vertical Borewells in Hard rock areas to anywhere in tamilnadu Including transportation to the work site as diricted by the depetmental officers…Etc.. (Up to 150m)

(b) IInd depth 151m to 180 m

From 181m to 210m

FRom 211m to 240m

From 241m to 270m

From 271m to 300m

Supply and fixing of 150mm PVC casing pipe as per IS 12818/2010 etc, complete as per standard specification(Casing shallow depth up to 80 mtr)

Labour charges for inserting of 150mm Dia PVC casing pipes assembly( with slot or without slot) in the drilled hole including Jointing pipes with pvc couplers with cement paste Etc.. Complete,supply and packing the annular Space with pebbles of sixze and quality as approved by the Excutive Engineers of TWAD Board.

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % Duty lpm x m (75x 275) 10 Hp

Supply of 63 Amps Porcelain fuse unit (500 V)of best quality make including cost of handling charges and all other incidental charges.

Supply of 63 A TPN switch disconnnector fuse units in sheet steel enclosure with HRC fuses Double break with ISI make including cost of handling charges and all other incidental charges.

Supply of 40 Amps 30MA RCCB/ELCB (Four Pole) switch with ISI make including cost of handling charges and all other incidental charges.

Supply of 10 sqmm Pvc Insulated Single Core Multi Strand Fire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges.

Supply of 3 core 6 sqmm Jointing of XLPE Insulated and Sheated 3 Core Flat Type Copper Cable Conforming to IS 694/1990 and as amended Thereafter with ISI make including cost of handling charges and all other incidental charges.

Supply of 4 core 16sqmm JOINTING OF L.T. CABLES 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CABLE CONFORMING TO IS 1554 PART I AND AS AMENDED THEREAFTER WITH ISI MARKING with ISI make including cost of handling charges and all other incidental charges.

Supply of 65mm UPVC Column pipe Supreme Heavy with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Bend with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" X 36" pipe nipple with ISI make including cost of handling charges and all other incidental charges.

Supply of 2" GI Flange Set with ISI make including cost of handling charges and all other incidental

Supply of 2"GM Non return valve with ISI make including cost of handling charges and all other incidental charges.

Supply of 2"G I Ordinary Coller with ISI make including cost of handling charges and all other incidental charges.

Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers.(p.no.29) 90mm HDPE Pipe 90mm HDPE Pipe

Earth work excavation and deposition on the bank with an initial lead and lift of 10 meters and initial lift of 2 meters in hard stiffy clay stiff black cotton hard red earth murram, gravelly soils(SS20B) etc., complete as per std., specification.

Lowering the following HDPE pipes and specials into trench and laying to proper grade and alignment complete as per standard specification by deparment officers etc.., HDPE Pipe 90mm

Jointing the HDPE pipes and specials and testing the required pressure with water etc.., Complete as per standard specification

Testing of pipes for water supply with hudralic testing equipments by filling with water including cost of water @ 60/KL and testing to recommended Pressure in convenient stretches and attending the brusts if any occurred during the test excluding the cost of pipes but including other incidential and operational charges ETC... complete for the following diameteres of pipes HDPE Pipe 90mm

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Refilling the excavated earth in to the trenches after laying the P.V.C. pipe in to the trench including cost of all labour charges and all other incidental charges etc., complete.

Plain Cement Concrete 1:5:10 (one part of cement, five part of Crushed Stone Sand (M- Sand) and Ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and fixing Solid Blocks of following size conforming to S.S. 2145-1965 (including jam Blocks closers etc..,) made in CC 1:3:6 (one Cement three sand and Six HBSJ 6 mm) in CM 1:5 (one cement and five sand) for Masonry wall partition wall including curing and finishing etc.., Complete

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and Fixing of Cudappah slab of 20 mm thick including cost of material labour charges and all other incidental charges etc., complete as per standard specification

Supply and Fixing of wooden board including cost of material labour charges and all other incidental charges etc., complete as per standard specification

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Supply of 6 sqmm Pvc Insulated Single Core Multi StrandFire Reterdant Flexible Copper Cable. with ISI Mark Conforming to IS 6 Sqmm Copper wire of best quality make including cost of handling charges and all other incidental charges.

Supply of 2" dia Bore clamp, cover and water proof compound etc., complete including cost of handling charges and all other incidental charges etc, complete as per standard specification

Supply of 2" dia , SS Adapter complete including cost of handling charges and all other incidental charges etc, complete as per standard specification

Supply of 2" x 6" dia , pipe nipple complete including cost of handling charges and all other incidental charges etc, complete as per standard specification

Supply of 2" x 12" dia , pipe nipple complete including cost of handling charges and all other incidental charges etc, complete as per standard specification

Supplying and Delivery of the following sizes of HDPE Pipes PE-100 - PN8 conforming to IS-4984/1995, as specified to technical specifications in standard length including labour charges for loading, un-loading and staging at stock yard etc.., complete as per standard specification as directed by the Department Officers. 90 mm HDPE stup bend

90 mm HDPE Elbow

90 mm HDPE Flange set

110 mm HDPE stup bend

110 mm HDPE Flange set

110 mm HDPE Elbow

110 mm HDPE Tee

110 x 90 mm HDPE Reducer

90 mm PVC Ball Valve

90 mm HDPE Tee

90 x 75 mm HDPE Reducer

2" x 3" HDPE Reducer