GE863/EWS-T-95 OF 2023-24 PERIODICAL SERVICES REPAIRS TO PLASTERING ROOFING JOINERY FALSE CEILING HARD STANDING TO CERTAIN BLDGS AT SUMDO IN THE AREA OF AGE BR-I POOH UNDER GE 863 EWS

Amount

M & L for complete removal of existing treatment of old plastered surfaces, preparation of wall and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered surfaces, preparation of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

M & L for removing of old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for writing building Nos, letters or figures (Block,Roman, Italic or Indian) on wall n exc. 30 cm height with synthetic enamel paint complete all as specified and directed .

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

M &L for 25 mm thick PCC 1:4:8 type D2 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite.

M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for 100 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in surface of hardstanding finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 ,and finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on walls all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof ,walls etc with grade of zinc coating 275. complete all as specified and as directed.

Ditto as per above item but except sheet

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Ditto as per above item but except sheet

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling etc complete all as specified and as directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of any description n. exc 1 sqm each complete all as specified & directed.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 35mm second class hard wood Glazed and Skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Pt-I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F power coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F power coated aluminium window & ventilator shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etcor provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.

M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

M&L for 5.5mm thick sheet glass in squares exceeding .50 Sqm in each pane with oil putty in complete all as specified & directed.

Preparation of new or previously untreated wood and wood based surfacrs of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink Primer.

Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M & L for preparation surfaces of wood and wood based material, treating end of post of chowkats, tec area tarred exc 0.1 sqm but n exc .5 sqm each ditto

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple.

S&F MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F MS butt hinges cold rolled meium weight of size 75 mm etc complete all as specified & directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified

S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thikness in floors ,apron etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed 20 mm thick cement plaster 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Schedule of Credit

R B TRADERS

M/S Gulab Singh

PRITPAL SINGH

M/S SHIV NATH ENTERPRISES

chankaya solutions

SANTOSH KUMAR

M/S Shamsher Negi Dewa