REPAIRS TO JOINERY, SANITARY FITTINGS AND PIPELINES, WIREMESH, FALSE CEILING, GLASS PANES, PLUMBING WORKS, BUILDERS HARDWARE ETC TO JCO/ORS MD ACCN OF SOL, NOL, CAMP NO II, IGOE UNDER GE CHENNAI

Amount

S&F Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and as dircted including taking up (or) down the existing GI pipe completely all as specified for following 15 mm dia bore.

S&F Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and as dircted including taking up (or) down the existing GI pipe completely all as specified for following 20 mm dia bore.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completely all as specified and as directed for following 20 mm outer dia bore pipes.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completely all as specified and as directed for following 25 mm outer dia bore pipes.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line complete all as specified and as directed for following 32 mm outer dia bore pipes.

S&F in repairs 15mm dia bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed.

S&F in repairs Ball valves 15mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed (min. weight 15mm-142 gms) complete all as specified and as directed.

S&F in repairs Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed (min. weight 20mm-210 gms) complete all as specified and as directed.

S&F in repairs Ball valves 25mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed (min. weight 25mm-455 gms) complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe ) complete all as specified and as directed.

S&F in repairs Vitreous china Wash Hand Basin, white, flat back of size 550x400mm excluding taps, waste, chain and plug and porcelain stopper out including brackets complete all as specified and as directed.

S&F in repairs Vitreous china squatting pan Orissa pattern size 550x440mm white with integral foot rest (excl flushing cistern and flush pipe ) and making good to floor complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufactures instruction complete all as specified and as directed including removal of existing cistern etc.

S&F in repairs 15mm bore PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps fancy type, standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) complete all as specified and as directed.

S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 92gms) complete all as specified and as directed.

S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed, fixed in repairs.

S&F in repairs Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf of including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and as directed. Make : NIRALI/JAYNA/DIAMOND/ PARRYWARE

S&F in repairs plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs PVC waste pipe for wash hand basin (size 31/32mm x 800mm length) of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs PVC waste pipe for Sink waste pipe (size 38/40mm x 1150mm length) of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs of Brass chromium plated 15mm wall mixer valve 2-in-1 for mixing hot and cold water incl provision only for over head shower, fancy type of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs 15mm dia angle cock with flange, chromium plated of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repair 15mm dia two way bib cock with flange, chromium plated of make that shall match with existing make Prayag complete all as specified and as directed.

S&F In repair 32mm brass full thread SS waste coupling for wash hand basin of make that shall match with existing make Prayag complete all as specified and as directed.

S&F In repair CP overhead shower ABS round with 225mm brass arm & flange of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs concealed stop cock regular body 15mm with flange plate, chromium plated of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs soap dish ,matt finished chromium plated (MCH/Colour) of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repairs corner glass shelf superior quality matt finished chromium plated (MCH/Colour CP ) with bracket and fittingsof make that shall match with existing make Prayag complete all as specified and as directed

S&F in repairs glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings of make that shall match with existing make Prayag complete all as specified and as directed

Supply and fix in repair CP towel ring of make that shall match with existing make Prayag complete all as specified and as directed

S&F in repair CP towel rail 20"(500mm long) of make that shall match with existing make Prayag complete all as specified and as directed

S&F in repair Stainless steel plate rack of size 910mm x 780mm x 250mm (31'' x 36 " 10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI 304 of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repair SS round grating for floor trap of male and female pattern 4" (101mm) of make that shall match with existing fitting i.e., Prayag complete all as specified and as directed.

S&F in repair CP sink cock regular spout with flange(wall mounted ) of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repair PVC cabinet mirror PTMTof size 400 x 500mm with sided shelves fancy type of superior quality of make that shall match with existing make Prayag complete all as specified and as directed.

S&F in repair 15mm dia CP bib cock nozzle with flange (washing machine tap) of make that shall match with existing make Prayag complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F in repairs covers for Rotational moulded polyethylene water tank of any capacity complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc.exc 250 & n exc 500 litres complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc. from tanks & from mouths of circulating pipes, etc.exc 500 & n exc 1000 litres complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified and as directed.

PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls /floor as in spouts etc complete including dismantling existing pipes complete all as specified and as directed.

PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete as in spouts etc including dismantling existing pipes complete all as specified and as directed.

PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) bends with oval access door75mm fixed in repairs complete all as specified and directed.

PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) junction single (single T ) equal or un equal with access door75 mm fixed in repairs complete all as specified and directed.

PVC (SWR) junction single (single T ) equal or un equal with access door110mm fixed in repairs complete all as specified and directed.

M&L for Preparing the surface in patches thoroughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles. In existing old terraces with brickbat coba or screeds, damaged or hollow portions, sharp edges, etc. and demolishing/dismantling/taking down and removing existing finishes of any type over existing roof slab till the mother slab is exposed and washing down with clean water to remove all dirt etc. The slab should be recoated with slurry of Dr. Fixit Pidicrete URP or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP and cement in 1:1 proportion. After drying, the surface cracks must be filled with Dr. Fixit. Crack-X or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP or polymer-modified mortar in case cracks are wider than 5 mm.Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner. Apply Dr. Fixit Prime seal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP in the crack and let it dry.

Item No. 57 Contd/- Then pour Dr. Fixit New coat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP into these cracks and wait for it to dry. Bitumen based waterproofing treatments if existing, must be completely removed by mechanical scarification or by any other effective mechanical means and Dilute 2 parts of Dr. Fixit Prime seal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP with 1 one part of water. This dilution shall cover 7 to 8 sq.mt. Allow it to dry for6 to 8 hrs.Apply the first coat of Dr. Fixit New coat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP without any dilution at the rate of 2 sq mt per litre and allow it to dry before taking up the second and third coats, the rate of application being the same. and open woven glass fibre mesh of 2.5 mm x 2.5 mm must be sandwiched between the first and second coat. While the 1st coat is still wet, place the fibre mesh on it. After the coat dries, start applying the 2nd coat of Dr. Fixit New coat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP .

M&L for apply a tack coat of bitumen 85 /25 at the rate of 1.20 Kg /Sqm on roof surfaces in patches including cleaning of surfaces in patches including sealing the open joints in the water proof felt including one coat solar reflective f aluminium painting @ .10 Lit per sqm on repaired portion complete all as specified and directed

Complete removal of existing roof treatment of any description in patches viz. tar felt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface. (b) Applying 2nd course of bituminous primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm. (d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.

75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete all as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.

M&L PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed.

M/L sand filling under paver blocks including watering and consolidation complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block 60mm with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

S&F for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment complete all as specified and directed.

M/L Screed bed or bedding layer of mortar 15mm thk for laying floor finish in CM 1:6 complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for flyash brick work with sub class B bricks straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed.

M/L preparation of newly plastered wall surfaces and applying two coats of cement based paint incl primer complete all as specified and as directed.

Demolition of Stone slabs and tiles of laid bedded and pointed in cement mortar or in any description or thickness in floors, platforms, aprons etc. complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1 : 4) including pointing ,moulding the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar of existing backing coat and screed removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces complete all as specified and directed.

M & L for non skid ceramic coloured joint free tile in Patches 7 to 8 mm thick Concept tiles design as approved (Square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed coloured ceramic Concept designer tiles of 7mm thick and area exceeding 0.11 sqm and not exceeding 0.18 Sqm as approved by GE, fixed in vertical surfaces in Patches such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and directed.

M&L for Glazed ceramic tiles vertical surface 300x200x 7 mm thick in Patches in set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement plaster as a backing coat in CM 1:3 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

Gl wire netting 0.90mm dia & 12mm mesh in patches of lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and directed.

Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed.

15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces finished the surfaces even and smooth without using extra cement all as specified and as directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick in CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compound (Make SIKA/FOSROC/CHOKSEY) complete all as specified and directed.

Preparation of new plasters surfaces of wall and applying plaster of Paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls complete all as specified and directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

Dismantling of PGI/CGI/Galvalume sheets as in roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc.,complete all as specified and directed.

Taking down shutters of any description exc. 1sqm but not exceeding 2sqm each including builders hardware complete all as specified and directed.

Taking down shutters of any description n.exc. 1sqm each including builders hardware complete all as specified and directed.

Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after cutting, easining etc with new iron mongry complete all as specified and directed.

M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and directed.

M&L for 35mm thick second class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for 30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to complete all as specified and directed.

M& L for 30 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and directed.

S&F Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F in repair Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and directed.

S&F Sheet glass 4.0mm thick, plain ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work including hacking out old broken glass (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips complete all as specified and directed.

S&F Sheet glass 4.0mm thick, figured glass pin head type & glazing with oil putty in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and directed.

M&L for applying two coat of Synthetic enamel paint over a coat of pink primer for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing incl 02 No. of 125mm size aluminium anodised handle, 03 No. of 100mm mild steel hinges and 02 No. of 150mm size aluminium anodised tower bolt of extruded section per shutter complete all as specified and directed.

S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and directed.

S&F stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, extruded section of size 200mm long complete all as specified and directed.

S&F Aluminium handles cast type anodised 100 mm size complete all as specified and directed.

S&F Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S& F Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repairs Butt hinges, 75mm size medium weight cold rolled mild steel Etc.,complete all as specified and directed.

S&F in repairs Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and directed.

S&F in repairs stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts, extruded section of size 200mm long all complete all as specified and directed.

S&F in repairs Aluminium handles cast type anodised 100 mm size complete all as specified and directed.

S&F in repairs Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S& F in repairs Aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wire mesh hinges, bow handles, locking arrangements etc complete all as specified and directed.

S&F in repairs aluminium powder coated ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed along with with 5mm thick frosts/pin headed glass fixed with glazing clips, and one for wire mesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wire mesh, hinges, bow handles, locking arrangements etc complete all as specified and directed.

S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glassing clips with one or more tracks including joining cleats for fixing complete all as specified and directed.

Repairs to aluminium door of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, prelaminated particle board, hydraulic door closer, stopper etc, and making the good to the original position complete all as specified and directed.

Repairs to aluminium window (sliding and openable), ventilator of any description including removal and refixing after replacement of the defective builders hardware/section, glass pane, peg stay etc, and making the good to the original position complete all as specified and directed.

Cutting holes in brick/stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement or cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate for the required depth of embedded portion of holdfast or lugs measured from the face of jamb in to the wall exc half brick but not exc one brick complete all as specified and directed.

S & F in repairs 12mm thick plywood, grade BWR,fixed with screws to timber frame work type BB with decorative laminate type1 0.90mm thick of surface finish colour and pattern as approved and fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.

S & F in repairs 18/19 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair complete all as specified and directed.

S & F in repairs 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in repair complete all as specified and directed.

M & L for 6mm thick external teak wood lipping over 18/19mm thick particle board/plywood fixed with nails complete all as specified and directed.

S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm complete all as specified and directed.

Supply and Fix in repair Locks, drawer, cupboard shutters grade I, size 75 mm Brass 4 levers complete all as specified and directed.

S & F in repairs stainless steel Cabinet Hinges/self closing hinges (Bombay Hinges) complete all as specified and as directed

S & F in repairs Magnet closures to cabinet cupboards complete all as specified and as directed.

M & L in repairs aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clamps and fixed to wall PVC rowel plug and brass screws complete all as specified and directed.

M & L Aluminium designer curtain rod brackets complete all as specified and directed.

S & F in repairs Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Cleaning of roof terrace, mouth of rainwater pipe and Cutting down vegetation growths like plants/ trees of girth n. exc 15cm from roof tops/ sides, external walls of bldgs, chajjas, wall junctions at junction of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls/ slab surfaces making good affected locations and applying TUFALO chemical (herbal medicine or Glyph sate Herbicide/equivalent) to arrest further growth and making good the disturbed surfaces with PCC (1:2:4) type B-1 or CM 1:2 all as specified and directed. Note : The unit rate quoted shall be deemed to include the cost of scaffolding/ staging

Dismantling of wall and ceiling boards ( fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH/ARMSTRONG or equivalent complete all as specified and directed.

M&L for small articles such as hold fasts etc. of Flat Iron 25 x 3, Grade confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparing small articles such as hold fasts, end of posts etc. of area n.exc 0.1Sqm and treated with Cresote Oil/ black bituminous paint etc complete all as specified and directed.

M&L preparing of wood and wood based materials, steel, and iron work, new or old and treating ends of posts, backs of chowkats, etc, area tarred exc 0.1 sq m but n exc 0.5 sq m each and treated with tar or coat tar black paint complete all as specified and directed.

M&L for sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed.

SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3100308)

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3100292)

ARK Enterprises (BID ID -3101124)

Sri Aruna Associates (BID ID -3099777)