Construction of 220 dwelling units for Economically Weaker Sections (EWS) consisting of 6 blocks (Ground plus 4 floors) at Chinnayapuram, Puducherry. (II Call)

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Extra for every additional lift of 1.5m or part there of in excavation / banking excavated or stacked materials - all kinds of soil.

Supplying and filling in plinth with M sand under floorsincluding, watering, ramming consolidating and dressing complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) -

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers , facias and eaves boards upto floor five level excluding the cost of centering , shuttering , finishing and reinforcement , with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases of columns,etc. for mass concrete.

Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters , butteresses , plinth and string courses etc.

Centring and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings , balconies and access platform

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.- Using steel sheet with M.S.frames

Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments, posts and struts.

Centring and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral - staircases

Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc.,including edges.

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size)

Providing precast cement concrete jali 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning , fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits - 50mm thick

Steel reinforcement for R.C.C.work including straightening , cutting , bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete above plinth level - Thermo - Mechanically Treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more

Providing and placing M30 grade cover block for RCC work all levels

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability. Note:- Cement content considered in this item is @330 kg / cum. Excess or less cement used as per design mix is payable or recoverable. - All work upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability. Note:- Cement content considered in this item is @330 kg / cum. Excess or less cement used as per design mix is payable or recoverable separately. - All work above plinth level upto floor V level.

Extra for providing richer mixes at all floor levels - Note:- Excess / less cement over the specified cement content used is payable / recoverable separately - Providing M-30 grade concrete instead of M-25 grade BMC / RMC. (Note:- cement content considered in M-30 is @ 340 kg /cum)

Extra for R.C.C / B.M.C / R.M.C work above floor V level for each four floors or part thereof

Providing and fixing of expansion joint system related with floor location as per drawings . The joints system will be of extruded aluminium base members , self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor / floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement with out stress to it's components. System shall consist of metal profiles with a unioversal aluminium base member designed to accommdate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self - centering arrangement that freely rotates / moves in all directions. The self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufacturers design (Material shall confirm to ASTM 6063) - Floor joint of 100mm gap

Extra for brick work / AAC block masonry /Tile brick masonry in super structure above floor V level , for each four floors or part thereof by mechanical means

Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level upto floor five level in cement mortar 1:4 (1 cement: 4 coarse sand) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work.

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. - 35 mm thick including ISI marked stainless steel butt hinges with necessary screws

Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S.flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding

Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete:- 300 x 16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 300 x 10 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : -250x10mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : - 150x10mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance +_1mm ), with wall thickness 2.0 mm (+-0.2mm) , corners of the door frame to be jointed with galvanized brackets and stainless steel screws , joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19 mm and 1mm (+-0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification - Extruded section profile size 42 x 50 mm

Providing and fixing to existing door frames - 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59 x 24 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt edging on both sides . The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall thickness 1.0 mm and stainless steel screws . The styles of the shutter reinforced by inserting galvanised M.S.tube of size 20x20 mm and 1mm (+- 0.1mm) wall thickness . The lock rail made up of 'H' section , a uPVC hollow ection of size 100 x 24 mm and 2 mm (+ 0.2 mm) wall thickness , fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm (+_ 0.1mm) wall thickness . They panels filled vertcally and tie bar at two places by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and washers , complete as per manufacturer's specification (For W.C. and bathroom door shutter)

Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators , side /top/centre hung, with beading and all members such as F7D,F4B,K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings , complete all as per approved design, (sectional weight of only steel members shall be measured for payment) - Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C.1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as per standard design complete

Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand) , finished with a floating coat of neat cement - 18mm thick

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sq.m impregnated with a coat of coarse sand at 60cudm per 10 sq.m including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete - with residual type petroleum bitumen of grade VG-10

Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion -110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion - Coupler - 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete 75mm

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement :4 coarse sand) and making good the wall etc., complete - 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

12mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1 cement :3 fine sand)

12mm cement plaster finished with a floating coat of neat cement of mix - 1:4 (1 cement :4 fine sand)

15 mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix - 1:4 (1 cement : 4 fine sand)

Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement - 20mm cement plaster

6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof

18mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand)- Flush Band.

White washing with lime to give on even shade - New work (three or more coats).

Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacture's specification -Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @0.75 ltr / 10 sqm

Painting steel work with deluxe multisurface paint to give an even shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture

Applying priming coat - with ready mixed pink pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work

Providing and fixing in position C.I.Rectangular cover 455x610mm with frame (low duty)

Demolishing nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Brick edging laid lengthwise with halfbrick depth including excavation , refilling and disposal of surplus earth lead upto 50 metre - with FPS brick of class designation 3.5

Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of

Providing and fixing Stainless steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I.brackets and stainless steel plug 40mm , including painting of fittings and brackets, cutting and making good the walls wherever required - kitchen sink without drain board -

Providing and fixing white vitreous china water closet squatting pan (Indian type) - Orissa pattern W.C.pan of size 580x440mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete - Flexible pipe - 40mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88 mm weighing not less than 190 gms.

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 20mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 25mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 32mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 40mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall ) - 50mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 20 mm nominal outer dia pipes

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 25 mm nominal outer dia pipes

Providing and fixing G.I.pipes complete with G.I.fittings including trenching and refilling etc.- External work -25mm dia nominal

Making connection of G.I.distribution branch with G.I.main of following sizes by and fixing tee,including cutting and threading the pipe etc.complete - 25 to 40mm nominal bore

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - - 50 mm nominal bore

Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 20mm nominal bore

Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 25mm nominal bore

Providing and fixing gun metal non -return valve of approved quality (screwed end) - 25 mm nominal bore - horizontal

Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet - 100 mm diametre

Constructing masonry chamber 60x60x75 cm inside , in brick work in cement mortar 1.4 (1 cement : 4 coarse sand) for sluice valve, with C.I.surface box 100 mm top diametre, 160mm bottom diametre and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation , foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and in side plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick , finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S (non modular) bricks of class designation 3.5

Constructing masonry chamber 60x45x50 cm inside with 75 class designation brick work in cement mortor 1:4 (1 cement : 4 coarse sand) for water meter complete with CI double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement 2 coarse sand,4 graded aggregate 20 mm nominal size) necessary excavation foudation conrete 1:5:10 (1 cement, 5 fine sand,10 graded stone aggregate) 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cemnt : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5

Providing and filling sand of grading zone V or coarser grade, all -round the G.I.pipes in external work - 25mm diametre pipe

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank - Circular Tank

Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 - 15mm nominal bore

Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore,165 mm long , weighing not less than 110gms

Providing and fixing PTMT Ball cock of approved quality colour and make complete with Epoxy coatd aliminium rod with L.P / H.P.H.D.plastic ball - 25 mm nominal bore, 152 mm long, weighing not less than 440 gms

Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements weighing not less than 106 grams.

Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic float complete - 32 mm nominal bore

Providing and fixing square mouth SW gully trap grade 'A' complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150x100mm size P type - with sewer bricks conforming to IS:4885

Constructing brick masonry chamber for underground CI inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) CI cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab with 1:2:4 mix (1 cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete extra complete as per standard design - inside dimensions 455x610 mm and 45 cm deep for single pipe line - with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing on wall /column face unplasticed - PVC soil and waste pipes (type-B) conforming to IS:13592-1992 including jointing with seal ring conformation to IS: 5382 leaving 10mm gap for thermal expansion - single socketed pipes 110mm diameter.

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm

Providing and fixing on wall face /column face unplasticised - PVC moulded fittings/ accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend with door 110mm

Providing and fixing on wall face/column face unplasticised - PVC moulded fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - heel rest bend 110mm.

Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes (type B) conforming to IS :13592 - 1992 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single socketed pipes 75mm diameter

Providing and fixing on wall/column face unplasticisd - PVC moulded fittings /accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion - Single tee with door - 75x75x75mm

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pippes conforming to IS :14735 - 1999 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion - heel rest bend 75 mm.

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings /accessories for unplasticised PVC soil and waste pipes conforming to IS:4985 including of jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion - bend with door 50 mm.

Providing, fixing, testing and commissioning of PVC multi inlet floor trap / p trap of self cleansing design moulded or fabricated, if not available in size mentioned below, with or without vent arm jointing with solvent cement followed by application of leak proof adhesive like FRP paste including encasing all round fixing the floor trap in cement concrete 1:2:4 ratio of size 300 x 300 mm x 250 mm height (approx) and making good the floors. 110mm dia inlet 75mm dia out let - Floor Trap

Providing and fixing water meter and stop cock in 25mm G.I pipe line including cutting and threading the pipe, making long screws, bolts, nuts, rubber insertions and testing the water meter etc. complete.

Providing and fixing C.I. swing type single door Foot valve conforming to IS 4038 and ISI marked, with bolts, nuts, rubber insertion etc.,complete - 50mm dia.

Providing and fixing in position union (UNIQUE/R Brand/HB Brand / UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing,jointing materials etc,complete- 25 mm dia.

Providing and fixing mild steel bracket including bolts, nuts, rubber insertion, labour charges etc, complete-100 x 50mm dia

Supply and grouting of SS rungs made of 20 mm dia SS pipe 150 mm wide for UG sump, to be fixed as per the detailed drawing

Providing, laying and jointing UPVC pipes (Finolex jain / Supreme / Truebore / (0.6Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and testing of joints with required equipment,including cost of solvent specials such as bends, tees, pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 75mm dia.

Providing, laying and jointing UPVC pipes (Finolex/Jain) (0.6 Mpa) conforming to specification 4985 and ISI transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

Providing, laying and jointing pipes (Finolex/Jain) (0.6 Mpa) conforming to specification 4985 and ISI marked transportation to the site, lowering to the laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 160mm

Providing and fixing in position UPVC moulded plain coupler (Finolex/Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 110mm dia

Providing and fixing in position UPVC moulded plain coupler (Finolex/Jain)(0.4 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 160mm dia

Providing and fixing in position UPVC moulded elbow (Finolex/Jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete. - 110mm dia

Providing and fixing in position UPVC moulded elbow (Finolex/Jain)(0.4 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete. - 160mm dia

Providing and fixing in position UPVC fabricated bend (Finolex/Jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete. - 110 mm dia

Providing and fixing in position UPVC fabricated bend (Finolex/Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete. - 160 mm dia

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular / switch,modular plate,suitable GI box and earthing the point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable etc.as required.Group (A)

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch,modular plate,suitable GI box and earthing the point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable etc.as required.Group - (B)

Supplying and fixing two module stepped type electronic fan requlator on the existing modular plate switch box including connections but excluding modular plate etc as required

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit , 2 way modular switch, modular plate , suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Supplying and fixing suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front of surface or in recess, including providing and fixing 6/16 A modular socket outlet and 6/16 A modular switch, connections etc. as required.

Supplying and fixing metal box of following sizes (nominal per size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required - 150 mm x 150 mm x 60 mm deep

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 2.5 sq.mm + 1 x 2.5 sq.mm earth

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2X 4 sq.mm + 1 x 4 sq.mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessed medium class PVC conduit as required - 2 X 6 sq.mm + 1 x 6 sq.mm earth wire

Supplying and laying of following size of PVC conduit in roof slab alongwith the accessories Make:Avonplast / Vijaya:- 25mm dia

Supplying and fixing of following ways surface / recess mounting , vertical type, 415 V , TPN MCB distribuition board of sherrt steel ,dust protected, duly powder painted , inlusive of 200 A tinned copper bus bar , common netural link, earth bar , din bar for mounting MCB'S (but without MCB,S (but without MCB's and incomer ) as required. (note : Vertical type MCB TPDB is normally usd where 3 phase utlets are required) - 4 way (4 + 12) , double door

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator)- 8 way ,double door

Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar , interconnections , powder painted including earthing etc. as required (But without MCB / RCCB / Isolator)- 12 way , double door

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. -Single Pole

Supplying and fixing 5 A to 32 A rating , 240/415 V, 10 kA, "C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections , testing and commissioning etc .as required. - Double Pole

Supplying and fixing 40 amps to 63 amps rating,Triple pole, 415 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. Make:Siemens/ABB/L&T Hager

Supplying and fixing 40 amps to 63 amps rating , 415 volts, 10kA 'c' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Four Pole

Supplying and fixing 100 amps rating , 415 volts, 10kA 'c' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. - Four Pole

Supplying and fixing following rating , four pole ,(three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc.as required - 25 A

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40A

Supply and fixing of surface mounting, batten type 20W LED tube light (Four feet) luminiare with effecient driver (efficiency shall be more than 90%) & required minimum of 1600 lumens output, comprising of high quality diffuser technology complete with efficient & constant current output driver suitable for operation on 230V, single phase, 50Hz AC supply, efficient heat sink, effective thermal management and with colour temperature shall be >5000K. The LED with suitable control gear and power factor >0.9. and necessary fixing accessories as required. Make: Philips - Smart light BN021C LED20S PSC CW GR52 or similar Wipro or equivalent.

Supply and installation of 1 x 18w Wall Mounted decorative fittings (Available in Textured grey, textured brown, antique silver& sunflower green colours) Make: Philips

Supply of 4 x 25sqmm armoured aluminium XLPE U.G cable- 1.1 KV grade.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X25 sq.mm (28 mm)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required

Supply and laying of earthing and cable gland earthing using 10 SWG copper wire.

Supply of 11KV 3Cx185 Sq.mm HT XLPE Aluminium armoured ug cable, without any cable joint. all complete as per specifications, drawings and / or as required by the PED.

Supply and providing of 11KV indoor type heat shrinkable end termination suitable for 3Cx185 Sq.mm HT XLPE aluminium ug cable. All complete as per specifications, drawing and/or as required by PED.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - above 120 sq.mm and upto 400 sq.mm

Supply of 3 1/2 x 300sqmm armoured aluminium XLPE U.G cable- 1.1 KV grade.

Supply of 3 1/2 x 240sqmm armoured aluminium XLPE U.G cable- 1.1 KV grade.

Supply of 4 x6 sqmm armoured aluminium XLPE U.G cable- 1.1 KV grade.

Supply of 4 x4 sqmm armoured aluminium XLPE U.G cable- 1.1 KV grade.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 4 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X240 sq.mm (62 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X300 sq.mm (70 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - above 185 sq.mm and upto 400 sq.mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation , sand cushioning , protective covering and refilling the trench etc. as required - above 185 sq.mm and upto 400 sq.mm

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand ushioning, protective covering and refilling the trench etc.as required - Upto 35 sq.mm

Supply, testing and commissioning of 630A, 11KV, 25KA, Motorised and SCADA ready load break switch attachement to the existing Ring main switchgear unit at existing 11KV PED RMS Yard, Type SF6 insulated and motorized construction all complete as required by PED. The item including all transformer protections and necessary safety accessories, The plinth shall be constructed by civil contractor based on the load calculations given by the electrical contractor etc. All complete as per specifications, drawing and/or as required by PED.

Supply and erection of 2.1 Mtr. height 50mm diameter GI Poles around the HT switchgear/Transformer yard and laid with 25x25mm welded mesh with 2 coats of Alminum paint on it. The pole to pole gap will be maintained as 2.25Mts max. (1/5th of the Pole will be embedded in the ground). The item including required civil works and kerb wall etc.

Supply, Unloading & handling, erection , testing and commissioning of 11KV/433V, 500 KVA of outdoor type, oil filled , copper wound, natural cooled (ONAN) type energy efficient transformer with the following specifications etc. energy efficient Transformer (IS:1180) with off load tap changer.The transformer cooling shall be of with oil and natural air. The items including necessary fixing accessories with all complete as required by PED. Rated Voltage HV Windings - 11 KV LV Windings - 433 V No load voltage ratio - 11 KV/ 433 V Rated Frequency - 50 Hz Winding Connections HV Windings - DELTA LV Windings - STAR Vector Group - Dyn 11 Terminal arangement Primary - 11KV Cable box Secondary - 433V Cable box. Temperature Rise by resistance - 90 Degree C Ambient Temperature - 50 Degree C Core lamination material - Cold Rolled Grain Oriented Core Type of cooling -Oil Natural Air Natural (ONAN) Type of winding insulation - DPC of class A insulation Losses No load losses and Load losses - as per energy efficiency requirements/standards. No load current (% of rated current) : Less than 1.5% Tap Changes: Type - OFF circuit Range - +5% to -15% in steps of 1.25% Note: The handling from the truck and placing on the plinth is included in the scope. The plinth shall be constructed by civil contractor based on the load calculations given by the electrical contractor. Suitable stopper fabricated out of MS angles shall be fixed to arrest the movement of the transformer.

Supply, installation, testing and commissioning of out door type (IP 65) LT Feeder Pillar fabricated with 14G CRCA sheet steel and powder coated, aluminium busbars, provision for incoming and outgoing cable terminations, the incoming and outgoing switchgears are as per the followings. The items including necessary control wiring, safety features, lock & key / sealing arrangements, minor civil works and providing necessary, support structure/frames with painting as required for erection. All complete with necessary fixing accessories etc. All complete as required by PED standards & specifications. 4 Way LT Feeder Pillar Incoming: 400A TPN MCCB - 1 no. Outgoing: 200A TPN FUSE - 4 nos.

Supply, installation, testing and commissioning of 415V metering panel board fabricated with 14G CRCA sheet steel, powder coated with siemens gray (RAL7032 IS-5) after seven tank process, complete with aluminium bus bars (the clearence shall not less than 25 mm for phase-phase and 19mm for phase- neutral/earth), 3.15mm sheet steel or 40x40x6mm MS angle for load bearing members, lifting hooks, MS base frame of 75mm height incomers and outgoing switchgear as below. The item including cost of supply and fixing of 3-phase energy meters, necessary sealing arrangements, 25x3mm GI earthing throughout the bottom length, 6 sq.mm FRLS copper wire inter connections for compartment earthing, complete copper control wiring with crimping type ferrules, copper lugs, proper engravation sheet to be fixed on each outgoing etc. Also the cost inclusive of minor civil works and providing necessary, support structure/frames with painting as required for erection. All complete as per specifications, drawing and/or as required by CEA/PED. The contractor shall submit general arrangement & control wiring drawings and get approval from site Engineer/Consultant before commence the fabrication works. Note:panels costing should be as per sld & with respect to PED standards Metering Panel Incomer : 200A TPN FSU : 1 no. Outgoings : 20 Sets each comprising of: a) 40A DP Fuse cut outs with neutral link. b) Single phase Energy meter as per PED requirement. c) 40A DP MCB (C - curve 10KA) 1 Sets each comprising of: a) 63A TPN Fuse cut outs with neutral link. b) Dummy chamber for Fixing three phase energy Energy meter as per PED requirement. c) 63A FP MCB (C - curve 10KA)

COMMON PANEL Incomer 200A, TPN, FSU - 1 Nos Phase indication lamps(R,Y,B) - 1 set. CT ratio 200/5A,CL:1.0 tape insulated bar primary type with suitable sorting links - 1 Set. Metering:Multifunction meters cl:1.0 measured with following parameters: V,A,F,PF,KW,KWH & Phase sequence. - 1 Set. Busbar: 200A, TPN, 36KA, for 1 sec Aluminium bus bar Phase: current density not more than 0.8A/sq.mm Neutral: half of the phase current (0.5 x phase) Earth: 25x3mm copper flat throught the panel length Outgoing: 100A, TPN, FSU - 2 Nos 63A, TPN, FSU - 2 Nos

EXTERNAL LIGHTING PANEL Incomer 63A, TPN, FSU - 1 Nos Phase indication lamps(R,Y,B) - 1 set. CT ratio 63/5A,CL:1.0 tape insulated bar primary type with suitable sorting links - 1 Set. Metering: Multifunction meters cl:1.0 measured with following parameters: V,A,F,PF,KW,KWH & Phase sequence. - 1 Set. Busbar: 63A, TPN, 36KA, for 1 sec Aluminium bus bar Phase: current density not more than 0.8A/sq.mm Neutral: half of the phase current (0.5 x phase) Earth: 25x3mm copper flat throught the panel length Outgoing: 32A, TPN, MCB - 2 Nos Timer switch (daily)/ digital time switches daily programme with standby battery (3years) 2 channel . Make:L&T-Hagger/Legrand-Lexic - 2 Nos

Excavation for cable trenches in soft soil , depth upto 1.2 m including dressing of sides lift upto 1.5m , including getting out the excavated soil , refilling with sand and good soil after laying of cable / pipe etc. in layers of 20cm , ramming, watering and disposal of surplus excavated soil as directed , within a lead of 50 meters (750mm (d) x 750mm(w))

Providing earthen cable trenches, including necessary excavation, supply and placing in position of sand, bricks / PCC protective slabs, cable markers and backfilling in compacted layers, all complete as per specifications, drawings and /or as directed by the Engineer. 450 mm wide x 600 mm deep for LT cables

Supply and installation of inspection chamber of 750mm x 750mm x 750mm depth (clear internal dimensions) with 230mm thick Brick cable chamber with 50mm thick RCC removable slab cover as required.

Supply and installation of inspection chamber of 600mm x 600mm x 600mm depth (clear internal dimensions) with 230mm thick Brick cable chamber with 50mm thick RCC removable slab cover as required.

Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointedwith stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc, complete -150 mm dia RCC pipe

Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand) including testing of joints etc, complete - 300 mm dia RCC pipe.

Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces ,couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 160mm dia.

Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc.but without charcoal / coke and salt as required

Earthing with copper earth plate 600 mm x 600 mm x 3 mm per thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required

Supply and laying of 25 X 6 mm GI flat as body earthing and neutral earthing laying with necessary insulators and fixing accessories etc. all complete as per specifications, drawings and / or as directed by PED.

Supply and laying of 40 X 6 mm GI flat as body earthing and neutral earthing laying with necessary insulators and fixing accessories etc. all complete as per specifications, drawings and / or as directed by PED.

Supply and providing the following safty items as per the requirements of satutory authorities: Fire Bucket with sand(4 buckets and one sand)

Supply and providing the following safty items as per the requirements of satutory authorities: Supply and fixing of 11KV danger board as per standard with all fixing accessories etc.

Supply and providing the following safty items as per the requirements of satutory authorities: Supply of 11KV Rubber gloves.

Supply and providing the following safty items as per the requirements of satutory authorities: Supply of 1.1KV Rubber gloves.

Supply of Rubber mats.

Supply and fixing of shock treatment/First Aid treatment chart in Tamil, English and Hindi. All complete with necessary fixing accessories etc.

LV Danger board stickers

First aid box

Dry type fire extinguisher -4.5 Kg for electrical room

Supply, delivery, installation and commissioning of johnson lift for 4 persons (272 kg) passenger lift with the following specification - Including 1 Year O & M Number of floors - 5 (Ground + 4 Upper floors) 1) Battery Operated Emergency Light And Alarm Bell 2) Call Register Signal And Vf Door Operator 3) Landing Push Button In Landing Door Frames 4) Automatic Rescue Device 5) Stainless Steel Button With S.S. Cover 6) Full Car Operating Panel 7) Digital Position Indicator 7 Segment Display In Car And Landings 8) False Ceiling In Car 9) Infra Red Door Screen 10) Scaffolding 11) 3 Way Intercom / Press And Speak Phone 12) Free Service For One Year 13) Pit Ladder 14) Ss Handrail On Rear Side 15) Minor Builders Work

Excavation for road way in soil by Mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres) including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.

Constrcution of sub grade and earthern shoulders with approved materials obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300-2.

Construction of granular sub-base by providing coarse graded meterial, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - For grading III material.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller. (As per MoRTH specification, 4th Revision)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (As per MoRTH specification, 4th Revision)

Providing, laying and rolling of open graded premix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades - Mechanical method using penetration grade bitumen and HMP of appropriate capacity not less than 40 to 60 tonne/hour. (As per as per clause 511 ofMoRTH specification, 4th Revision)

Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 40 to 60 tonne/hour using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade - Type B (As per as per clause 513 of MoRTH specification, 4th Revision)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complete

Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tlii the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed-in rows 15cm apart in either direction.

Maintenance of lawns with fine grassing for the first year including watering, etc.,

Fabrication, supply and installation of tubular street lighting pole of following length fabricated out of MS pipes of various diameters and swaged as per standards. A junction box incorporating 16A 4-way terminal, 6A MCB and other accessories shall be fixed to the pole for loop in & loop out of cable. XLPE cable connection to the lighting fixture at top, 8 SWG copper coil earthing, set of 50mm GI pipe of required length shall be provided at the bottom of the pole for cable entry to the junction box with the following type outreach curved bracket. The bottom of the pole will have a base plate of size 350 x 350 x 10mm MS plate welded to the pole. The base plate shall be fixed on 600 x 600 x 1500 mm deep pedestal in cement concrete 1:2:4, with approved hardware etc., as per directed by the Engineer-in-charge.(rate inclusive of civil works) 9 meter with single outreach curved bracket

Fabrication, supply and installation of tubular street lighting pole of following length fabricated out of MS pipes of various diameters and swaged as per standards. A junction box incorporating 16A 4-way terminal, 6A MCB and other accessories shall be fixed to the pole for loop in & loop out of cable. XLPE cable connection to the lighting fixture at top, 8 SWG copper coil earthing, set of 50mm GI pipe of required length shall be provided at the bottom of the pole for cable entry to the junction box with the following type outreach curved bracket. The bottom of the pole will have a base plate of size 350 x 350 x 10mm MS plate welded to the pole. The base plate shall be fixed on 600 x 600 x 1500 mm deep pedestal in cement concrete 1:2:4, with approved hardware etc., as per directed by the Engineer-in-charge.(rate inclusive of civil works) 9 meter with double outreach curved bracket

Fabrication, supply and installation of tubular street lighting pole of following length fabricated out of MS pipes of various diameters and swaged as per standards. A junction box incorporating 16A 4-way terminal, 6A MCB and other accessories shall be fixed to the pole for loop in & loop out of cable. XLPE cable connection to the lighting fixture at top, 8 SWG copper coil earthing, set of 50mm GI pipe of required length shall be provided at the bottom of the pole for cable entry to the junction box with the following type outreach curved bracket. The bottom of the pole will have a base plate of size 350 x 350 x 10mm MS plate welded to the pole. The base plate shall be fixed on 600 x 600 x 1500 mm deep pedestal in cement concrete 1:2:4, with approved hardware etc., as per directed by the Engineer-in-charge.(rate inclusive of civil works) 48W LED Street Light Fitting (Philips / Havells )

Supply, install, test and commission of booster pump Terrace Pump located at terrace level, Capacity: 450 LPM at 35 Mtr. with pressure of 3.5kg / sq.cm at the top most hydrant, complete Head, Horizontal Centrifugal pump with Bronze Impeller, SS Shaft, Mechanical Seal, coupled to 7.5HP, 2900 RPM, TEFC, Squirrel Cage Induction Motor complete withM.S. Base Frame, anti vibration pad, foundation bolts, pressure gauge with drain valve, and all other necessary fixing accessories.

Supply, erection, testing and commissioning of `FIRE HOSE CABINET' (FHC) in size of 750mm x 900 mm x 250 mm.hinged door shutter and frame and fabricated out of 14 SWG sheet steel, fitted with 4mm thick toughned glass with rubber beeding in the front including finishing with powder coat painting complete. The rate shall be inclusive of stand for mounting, all fasteners etc, and cabinet shall be powder coated finish of red colour both inside and outside.

Single headed hydrant valve as per IS 5290, made of Gun metal with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc complete.

15 M long, 63mm dia RRL hose with instantaneous couplings and Hoses shall be stored inside the hose cabinet.

1 no. Gun short branch pipe with nozzle.

Fire Hose Reel Drum (as per ISI) wall mounted, swinging type 18 SWG MS sheet, fitted with 19 mm dia x 36 M long, high pressure hose with 5 mm outlet nozzle with shut off valve (IS: 884-1969)

One no 25mm dia ball valve

Supply, fixing, testing and commissioning of Fire Brigade Inlet (Pumping in Breech) connection, having Gunmetal body with 1 Nos. 63 mm size Gunmetal Male Instantaneous inlets (with NRV), and 100 mm size flanged outlet, suitable for connection to Dry Riser piping. Fire Brigade inlet body shall be provided with drain valve. Fire Brigade Inlet connection shall be ISI approved.

Supply, erection, testing and commissioning of slim seal type butterfly valves with shperoidal graphite iron disc (SG iron), with nitrile rubber seal and tested to PN 16 including a set of suitable GI flanges, as per BS 10 Table - 1, bolts, nuts GI washers, neoprene rubber gaskets etc., complete 100 mm NB

Supply, erection, testing and commissioning of Dual Plate Non-return valves with CI body &upto 125NB PN 16 including a set of suitable MS flanges, as per BS 10 Table - 1, bolts, nuts GI washers, neoprene rubber gaskets etc., complete. 100 mm NB

Supply, erection testing & commissioning of pot strainer / Y Strainer with CI body tested to PN 16 including a set of suitable GI flanges Rate shall include for rubber insertion, bolts, nuts MS flanges. 100 mm NB

Supply, erection, testing and commissioning of 25mm dia Air release valve. The rate shall be inclusive of accessories. 25mm dia air release valve

Supply, installation, testing and commissioning of TERRACE FIRE PUMP PANEL withType-2 Co-ordination DOL starters for the booster pump and complete with auto/ manual switch, timers, rotary switches, indication lamps, enclosure being vermin & dust proof (IP65), necessary alarms, push buttons, etc. The panel shall also be provided with industrial hooter for alarm and necessary suitable relays shall be provided - 450 LPM pump

Supply, installation, testing and commissioning of 5000 litre sintex tank for fire fighting system wih inlet, outlet and drain provision.

Supply,erection & testing of approved make ABC type extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS standard and wall mounted type. fire extinguisher shall have ISI approved. 4.0 kg

Supply,erection & testing of approved make carbon - di - oxide type cylindrical shape fire extinguisher with fixing hangers, hose,brackets, screws to required size etc., complete as per IS standard and wall mounted type. fire extinguisher shall have ISI approved. Co2 fire extinguisher 4.5 kg

Supply, erection in position approved make fire bucket of 24 gauge galvanised steel sheet, standard 9 litre capacity & of round bottom shape painted white inside & red outside & black on the bottom done with letters " FIRE" in black and goldwith wall mounting bracket & screws.

Providing installing anfd fixing in posation the signages as mentioned below with necessary drills, screws etc., complete. (GF TO 4RD FLOOR) Fire Exit - Name Board - Size 8" x 8"

Providing installing anfd fixing in posation the signages as mentioned below with necessary drills, screws etc., complete. (GF TO 4RD FLOOR) Fire Hyderant Location - Name Board - Size 8" x 8"

Providing installing anfd fixing in posation the signages as mentioned below with necessary drills, screws etc., complete. (GF TO 4RD FLOOR) Fire Brigade Inlet Location - Name Board - Size 8" x 8"

Providing installing anfd fixing in posation the signages as mentioned below with necessary drills, screws etc., complete. (GF TO 4RD FLOOR) In Case of Fire Use Staircase - Name Board - Size 8" x8"

Providing installing anfd fixing in posation the signages as mentioned below with necessary drills, screws etc., complete. (GF TO 4RD FLOOR) Extinguisher - Name Plate - Size 8" x 8"

Sri Ganeshkumar Constructions