CONSTRUCTION OF COMPOUND WALL,CC ROAD,PAVER BLOCK AND RETAINING WALL FOR NALA IN SUB CENTRE CHINCHPUR TQ DHARUR DIST BEED

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 1 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto ISO m) By Mechanical Means Bd.A.2 Page No. 259 SSR OF 2022-23 ITEM NO. 21.06 & PAGE NO.153

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, 2 roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade) Bd. E. 1 Page No. 287 SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction 3 and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.3 Page No. 298 and B.7, Page No.38 SSR OF 2022-23 ITEM NO. 25.11 & PAGE NO.178

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 4 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) Bd.F.5 Page No. 300 and B.7, Page.No. 38 SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179

Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel 5 centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix Bd.F.6 Page too. 300 and 8.7, Page fo.3'8 SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181

roviding second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315 SSR OF 2022-23 ITEM NO. 27.05 PAGE NO.197

Providing and fixing mild steel grill gate with angle Iron frame 65 mm x 65 mm x 10 mm with iron bars at ISOmm.C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking 7 arrangement, welding riveting and oil painting of three coats of approved shade. V/eight of gate 35 Kg/smt. Bd.W.6 Page No. 585 SSR OF 2022-23 ITEM NO. 44.1 & PAGE NO.294

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Bd.L.2 Page No. 368 SSR OF 2022-23 ITEM NO. 32.05 & PAGE NO.209

Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to 9 the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat)As directed by Engineer- in- charge SSR OF 2022-23 ITEM NO. 35.11 & PAGE NO.224

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness 11 of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete A directed by Engineer in charge SSR OF 2022-23 ITEM NO. 33.51 & PAGE NO.218

Providing and laying in situ / ready mix M20 Cement Concrete of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen 12 etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc ) BR.47(a) Page No. 140 and B. 7, Page No.38 SSR OF 2022-23 ITEM NO. 14.39 & PAGE NO.96

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining 13 walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with CD 8 Page 163 SSR OF 2022-23 ITEM NO. 11.29 & PAGE N0.83

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306 SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188