SPL REPAIR TO BLDG NO P-7 AT 12 BRD, AF, PROVN OF CERTAIN E/M WORKS IN PG LAB-I AND II EW COMPLEX AND PROVN OF A PORCH AND RE-ALIGNMENT OF ENTRY DOOR AT INDOOR SPORTS COMPLEX AT 12BRD, AF

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 25mm thick cement concrete flooring type B1, 1:2:4 using 20 mm graded aggregate finished even and fair complete all as specified and directed by Engr-in-charge.

M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.

M&L for Non- skid joint free ceramic coloured printed tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM (1:3) finished even and fair as on brick or concrete surfaces for laying wall tiles complete all as specified and directed by Engr-in-charge.

M&L for Colour Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge.

M&L for Dark Shade Vitrified ceramic tiles 10 mm thick (Square/rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed by Engr-in-charge.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in cooking platforms/skirting and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.

M&L for Use and waste form work to landing & chajjas including edges for rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-charge.

M&L for RCC (1:2:4) Type B1 (Nominal Mix) using 20 mm graded stone aggregate slab supported on walls beam and columns shelves and the like complete all as specified and directed by Engr-in-charge.

M&L for MS TMT bar 10 mm dia or over cut to length bent to shape required including cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white (excluding fixing bolt, flushing cistern and flush pipe ) incl plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified and directed by Engr-in-charge.

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of bracket complete all as specified and directed by Engr-in-charge.

S&F in repairs 10ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float & handle including brackets complete all as specified and directed by Engr-in-charge.

S&F in repair for bib taps 15mm bore (for iron pipe) cast copper alloy fancy type chromium plated butter fly handle screwed down including fixed complete all as specified and directed by Engr-in-charge.

S&F in repair for stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs of pillar tap 15mm bore dia cast copper alloy wit cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F 45cms long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one complete all as specified and directed by Engr-in-charge.

S&F Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm 45gms/40mm-60 gms) complete all as specified and directed by Engr-in-charge.

S&F grating 100mm dia of chromium plated (Minimum weight 25 gms) complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 110mm bore) including flat iron clamp for proper fixing complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC ( SWR) bends 110mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC ( SWR) pipes single socketed in any length with rubber ring joints fixed to wall ( 75mm bore) including flat iron clamp for proper fixing complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC ( SWR) bends 75mm dia complete all as specified and directed by Engr-in-charge.

S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting grooves and making good in cm (1:3) or PCC (1:2:4) for concealed tubing incl taking down old GI Tubing 15mm dia complete all as specified and directed by Engr-in-charge.

All as per sl item No 28 but 20mm dia.

S&F 75 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

S&F 75 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in fixed to wall complete all as specified and directed by Engr-in-charge.

S&F 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed by Engr-in-charge.

S&F 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in fixed to wall complete all as specified and directed by Engr-in-charge.

S&F in repair Cast iron door bends of 75 mm dia including dismantling old fitting complete all as specified and directed by Engr-in-charge.

S&F in repair Cast iron door bends of 100 mm dia including dismantling old fitting complete all as specified and directed by Engr-in-charge.

S&F in repair for Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with assess door including dismantling old fitting complete all as specified and directed by Engr-in-charge.

S&F in repair for Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 100 mm dia pipe fitted with assess door including dismantling old fitting complete all as specified and directed by Engr-in-charge.

M&L for 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed by Engr-in-charge.

Taking down of plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc and removing rubbish outside the MoD land complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement mixed with liquid integral water proofing compound complete all as specified and directed by Engr-in-charge. Note: The liquid WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note: The work to be executed at the height of 12 to 15 mtr the rate for necessary scaffolding deemed to be included in the quoted rate.

M&L for rendering 5mm thick in CM (1:3) on other than fair faces of ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for two coats with distemper oil emulsion over a coat of primer on new plastered surface on wall complete all as specified and directed by Engr-in-charge.

M&L for applying two coats of cement base paint white or tinted on newly plastered wall surface including preparation of surface complete all as specified and directed by Engr-in-charge.

M&L for Preparation of newly plaster surface of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparing old disturbed surface of wall complete removal of existing treatment and applying two coat of oil emulsion distemper over 1 mm thickness birla/JK wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparing old disturbed surface of wall complete removal of existing treatment and applying two coat of cement base paint complete all as specified and directed by Engr-in-charge.

S&F Vitreous China urinal, Half stall type , white) complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe complete all as specified and directed by Engr-in-charge.

Fixing of Vitreous china soap tray embedded in the wall complete all as specified and directed by Engr-in-charge.

M&L for Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-charge.

M&L for Urinal partitions slab as in repair termination about 40 cm above floor line urinal partition white of size 310x700 mm complete all as specified and directed by Engr-in-charge.

S&F in repair Chromium plated shower roses with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F Solid PVC door frame of size 60mm x30mm made out of PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100x8 sheet metal CSK screw complete all as specified and as shown on drawing sheet reinforced with MS square type, supplying & fixing in opening as per specification & drawing and complete all as specified and directed by Engr-in-charge.

S&F factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3 mm thick high pressure compact laminated on both side of approved color as infill, with C type GI o 40x20x19 of MS pipe as stiffener & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-in-charge.

S&F 100 mm butt hinges extruded Aluminium alloy, with galvanized mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and directed by Engr-in-charge.

S&F 150mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F 125mm Aluminium anodised hadles cast type of extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) and providing all necessary fittings for connecting with pipe line, complete all as specified and directed by Engr-in-charge.

S&F Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F Ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-charge.

S&F Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms) complete all as specified and directed by Engr-in-charge.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and directed by Engr-in-charge.

S&F PVC Connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins arches pillars etc but excluding ashlar facings complete all as specified and directed by Engr-in-charge.

M&L for Half brick work with sub class 'B' bricks, straight of curved on plan not exc 6M mean radius built in CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM (1:6) complete all as specified and directed by Engr-in-charge.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, step cills sunshades shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed by Engr-in-charge.

Cutting out cracks to V section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1) (by weight) complete all as specified and directed by Engr-in-charge.

Roughening the surface of old concrete roof surfaces by picking, seeping clean and washing down with water to remove dust etc including removal of old treatment of any description and removing the debris to a distance of n exc 50 cm away from plinth protection complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in CM (1:4) using water proofing compound at the rate 3% weight of cement over concrete surfaces complete all as specified and directed by Engr-in-charge. Note: The liquid WPC shall be measured and paid separately.

M&L for APP based polymeric membrane minimum weighting 3Kg/Sqm and minimum 3 mm thick reinforced with polyester non wove fabric (wt not less than 150 gms /sqm) land on primed surface by forced application complete all as specified and directed by Engr-in-charge.

Supply only water proofing compound complete all as specified and directed by Engr-in-charge.

M&L for PCC type B0 1:2:4 (12.5 mm graded aggregate) as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed by Engr-in-charge.

M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors windows ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed by Engr-in-charge.

S&F Aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium section weighing 0.55 Kg/Sqm including necessary jointing cleats glazing clips rubber neoprene packing handles two nos in each door hinges anodised aluminium snap beading screws complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) windows and ventilator shutters with aluminium grill side hung type without sash bars aluminium section weighing 0.55KG/Sqm including necessary jointing cleats glazing clips rubber packing anodised snap beading screws anodised aluminium fitting such as peg stay 150 mm long (01 No) hinges type B2 100 mm long(02 No) suitable handle (01 No) complete all as specified and directed by Engr-in-charge.

S&F stainless steel wire cloth (SS304 grade) 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples with wooden/aluminium beads/screws to window/door complete all as specified and directed by Engr-in-charge.

S&F 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed by Engr-in-charge.

S&F 4 lever brass mortice lock, vertical type, size 75 mm complete all as specified and directed by Engr-in-charge.

M&L for 20 to 30 mm thick cudappa stone bedded and jointed in CM (1:6) and pointed in CM (1:3) and kitchen slab or window cills/jambs complete all as specified and directed by Engr-in-charge.

S&F H180 shop offset hinge top & bottom heavy duty pivot by brand rixson of 150 to 200 mm long brass fixed to aluminium doors shutters complete all as specified and directed by Engr-in-charge.

S&F of floor door stopper of aluminium of 140 mm length alloy body and tongue anodized with hard steel spring complete all as specified and directed by Engr-in-charge.

S&F aluminium sliding door bolt of 250 mm long extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F aluminium anoidised handles of 150 mm long extruded cast type and fixed complete all as specified and directed by Engr-in-charge.

Excavation in post holes (or similar holes) each, returning filling in exc 0.5 cum, getting out, returning filling in soft/loose soil and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.

M&L cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.

S&F Joist channel, angle or tee section fixed independently without connecting plated of using Fe410-W (Gde E-250) quality (Beam, tee, angle, Channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engr-in-charge.

S&F roof trusses Fe 410-W (Gde E-250) quality - A (framed), trussed, purling, wind tie, crane entries and rail and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engr-in-charge.

S&F plates (plain or chequered) channels squares cut or notching attached to beam or tee confirming to Fe.410.Gde-E-250 complete all as specified and directed by Engr-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.

M&L for cement concrete interlocking of glossy finished tiles 80 mm thick with coloured cement and no pigment laid dry with over 25 mm thick sand cushioning over PCC bed (PCC bed to be paid separately) complete all as specified and directed by Engr-in-charge.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B1 complete all as specified and directed by Engr-in-charge.

M&L for filling in any position and any shape in CM (1:3) n exc 25 Sq cm complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation and getting out in soft out in soft loose soil complete all as specified and directed by Engr-in-charge.

Returning filling in soft / loose soil incl spreading, levelling, watering and well ramming in layers n exc 25 cm complete all as specified and directed by Engr-in-charge.

Removing excavation soil n exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-charge.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for RCC nominal mix (1:2:4) type B1 using 20mm grade aggregate as in foundations, column footings, plinth beams, etc. complete all as specified and directed by Engr-in-charge.

M&L for RCC nominal mix (1:2:4) type B1 using 20mm grade aggregate as in column pillars pier post and strut, etc. complete all as specified and directed by Engr-in-charge.

M&L for RCC nominal mix (1:2:4) type B1 using 20mm grade aggregate as in beam cantilever brass beam 1.5m span, etc. complete all as specified and directed by Engr-in-charge.

Formwork to sides of concrete foundation, footings and plinth beams with fair finished, flat surfaces of concrete complete all as specified and directed by Engr-in-charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished, square shape of the concrete surfaces complete all as specified and directed by Engr-in-charge.

M&L for Mild steel plain sheet of 1mm thick for wall cladding steel gates and similar works cut size holes punched including rounding clout riveting complete all as specified and directed by Engr-in-charge.

S&F for large pintle hinges hand made for fixing of gate sliding for gate complete all as specified and directed by Engr-in-charge.

M&L for rendering 10mm thick in CM (1:4) on other than fair faces of brick concrete surface work finished even and fair complete all as specified and directed by Engr-in-charge.

M&L for wiring with cable of size 1.5 Sqmm single core copper multistranded conductor including continuous earth wire, using cable FRLS insulated (unsheathed) 1100 volts grade conforming to IS-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories for followings:-

One light point controlled by one, one way switch, (6+4)

One fan point controlled by one, one way switch and regulator.

One 3 pin socket out let 5 amps independent

One 5 pin, 5 amps socket point in same board with other switches.

One 3 pin socket out let 16 amps independent but with cable of size 4.0 Sqmm in point wiring and 4.0 Sqmm in continuous earth wire.

M&L for modular switch one way 6 amps 1 module complete all as specified and directed by Engr-in-charge. (27+4)

M&L for modular switch one way 16 amps 1 module complete all as specified and directed by Engr-in-charge.

M&L for modular socket 2 in 1, 5 pin 6 amps 2 module complete all as specified and directed by Engr-in-charge.

M&L for modular socket 2 in 1, 6 pin 6A/16 amp 2 module complete all as specified and directed by Engr-in-charge.

M&L for ceiling rose surface Bakelite 3 terminal complete all as specified and directed by Engr-in-charge. (5+4)

S&F of modular metal flush box 2 module including cutting of chassis and making good disturbed surfaces complete all as specified and directed by Engr-in-charge. Note: Rate deemed to include in quoted rate.

S&F of modular metal flush box 3 module including cutting of chassis and making good disturbed surfaces complete all as specified and directed by Engr-in-charge. Note: Rate of cutting of chassis and making good deemed to included in quoted rate.

S&F of modular metal flush box 6 module including cutting of chassis and making good disturbed surfaces complete all as specified and directed by Engr-in-charge. Note: Rate deemed to include in quoted rate.

S&F of modular white cover plate with frame 2 module complete all as specified and directed by Engr-in-charge.

S&F of modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-charge.

S&F of modular white cover plate with frame 6 module complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2x10 sq mm and 1x10 Sq mm as in continuous earth wire drawn in to & including pvc conduit medium not less than 25 mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring with single core copper multi strand conductor FRLS insulated (unsheathed) cable of size 2x06 sq mm and 1x6 sq mm as in continuous earth wire drawn into & including PVC conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as specified and directed by Engr-in-charge.

Supply and fix air cooled split unit Air Conditioner electric driven (single phase) cooling capacity 6050 K cal per hour 2 Ton BEE 5 star rated complete all as specified and directed by Engr-in-charge.

S&F MS stand factory made suitable for condensing unit of split type AC duly powder coated complete all as specified and directed by Engr-in-charge. Make- ISI marked

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 % and capacity 5 KVA complete all as specified and directed by Engr-in-charge.

S&F in complete for sheet metal enclosure with two pin socket, chain plug cover with one MCB SP of 32 Amp capacity with alignment 10 KA ‘C’ series including electric connection complete all as specified and directed by Engr-in-charge.

M&L complete for wiring with cable of size 4.0 Sqmm in point wiring and 4.0 Sqmm in continuous earth wire single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement mortar (1:3) to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Note: Cutting not exc 4cm girth and 4cm width.

M&L complete for MCB dist board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din rail SPN dist board 04ways double door complete all as specified and directed by Engr-in-charge.

M&L for air circulator fans 230 V single phase oscillating 300 mm sweep suitable for wall mounting complete all as specified and directed by Engr-in-charge.

M&L for Pedestal fans 230 V single phase oscillating 400 mm sweep free standing with min dimension 56.4x35.9x65.7 cm, plastic body controller type pull chain complete all as specified and directed by Engr-in-charge.

S&F LED Luminaire 1x4 foot 36 W, 220 V AC recesses type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible cooper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

S&F LED Luminaire spot lights 35/36 W, 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver holder & LED lamp suitable for wall including connecting up with driver three core flexible cooper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

S&F superior quality extension board/ Tray which comprises 06x15 Amp socket / switch combination along with 06 mtr long 3 core cable of size 4 Sqmm cable complete all as specified and directed by Engr-in-charge.

M&L complete for dist board, sheet steel, powder coated for MCB DB s with copper bus bar, neutral link and earthing stud conforming to IS 13032/IS 8623 TPN vertical 4 ways double door for three phases out going complete all as specified and directed by Engr-in-charge.

M&L complete for dist board, sheet steel, powder coated for MCB DB s with copper bus bar, neutral link and earthing stud conforming to IS 13032/IS 8623 TPN vertical 8 ways double door for three phases out going complete all as specified and directed by Engr-in-charge.

Supply and fix MCCB 3 Pole, 50 Hz,415 Volt, fixed type, 100 Amp with breaking capacity 16 KA complete all as specified and directed by Engr-in-charge.

M&L complete for MCCB triple pole 240 volts, C curve-10 ka, 63 Amp complete all as specified and directed by Engr-in-charge.

Supply and fixing amp rating 240V, 10KA 'C' curve mainiature circuit breaker (MCB) of following poles complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge.

SP 5 to 32 Amp

SPN 40 Amp

M&L complete for earthling with galvanized mild steel earth plate electrode 600x600x6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5mtr (B.G.L.) and connected to galvanized iron earth strip 25x4mm by means of bolts, nuts, check nuts and washer of galvanized iron including PCC (1:2:4) type B1, precast RCC cover slab with suitable handle made of 12mm round bar, including necessary excavation &earth work in any type of soil. 20mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm dia bore, light grade galvanized steel tubing up to 7.5 mtr length for drawing earth lead wire protection common salt, charcoal etc complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and directed by Engr-in-charge.

M&L complete for 1x20 Watts (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipatiion & integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge.

Parveen Builders

M/S CHANDER MUNI

GIR RAJ BUILDERS

M/s R P Enterprises

M.B. ENTERPRISES

M/s Navansh Engineers & Consultants

M/S Yamin