Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC 137 MODEL TOWN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.9 L+₹3.7 L (8.92%)Rejected-AOC SAHEED UDHAM SINGH NAGAR THANDI KHUEE SUJANPUR PATHANKOT 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹44.9 L+₹3.7 L (8.96%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹46.0 L+₹4.8 L (11.6%)Rejected-AOC H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹46.6 L+₹5.4 L (13.1%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
SPL REPAIR TO CERTAIN BLDGS, REV WORKS AND MINOR WORKS UNDER AGE B/R-II OF GE(N) MAMUN
2023_MES_599123_1
GE(N)/M-12/2023-24
Open Tender
Civil Works
Item Rate
150 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹98,000
14 Aug 2023
29 May 2023
29 Jun 2023
29 May 2023
27 Jun 2023
12 Jun 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.
All as per Srl Item No1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm .
S&F pressed steel frames for doors/windows of size 125x60mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I including two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.
S&F aluminium sliding door bolts 300mm long, bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed.
S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting/asbestos sheet any gauge, thickness including Nainital or similar pattern roof covering, and removal of rubbish complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.
All as per item No 13 but 0.50mm thick plain pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet.
Dismantling of walls and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets, grid work etc and removal complete all as specified & directed.
M&L false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, complete all as specified and directed. Make: M/s Saint Gobain or equivalent of Armstong/Everest
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement & two coat of Oil bound distemper distemper including preparation of surface, applying wall care putty in any layers to obtain even and smooth surface on walls complete all as specified and as directed. Note: Where thickness of putty is required more than 1mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.
M&L for rendering 15mm thick in CM 1:4 in two layers (10+5mm) on brick masonary of brick work surfaces finishing the surfaces even and smooth without using extra cement & applying two coats of exterior emulsion weather coat (Appex) over a coat of primer complete all as specified and directed
Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:6) including dismantling of old tiles and removal of rubbish complete all as specified and directed
All as above item 20 but over 10mm thick bedding layer of mortar in CM 1:4 as in verticle surfaces viz dado, skirting etc.
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles,and removal of debris out off the premises etc complete all as specified and directed.
M&L for brick work with fly ash brick (nominal size)sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed
All as per item no 23 but except brick
Dismantling of rolled mild steel as in trusses, tubular purlins, rafters etc and refixing of purlins, rafters or trusses including necessary cleats etc. including two coats of synthetic enamel paint after preparation of old steel surface complete all as specified and as directed.
S&F steel works in tubular truss with special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade st-240 provided with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 45cm long, diameter of shank 16 mm, complete all as specified and directed.
M&L for rolled mild steel section in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250 Quality-A) complete all as specified and directed.
S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.
M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for 75mm thick cement concrete type D-2,1:4:8 (40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.
M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed
M&L for Machine pressed precast concrete pre-laminated glossy coloured interlocking paver block any shape and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as specified & directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified & directed.
M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed.
S&F Mild steel TMT bars bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 150mm, fixed in floor complete all as specified & directed.
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.
S&F in repairs 150 mm mild steel helical door spring for door closer, complete all as specified and directed.
S&F Aluminium wardrobe hooks of 6 no each (as per sample) fixed to wall complete all as specified & directed.
Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections including cleat angle, powder coated aluminium snap beading for glazing/ paneling fixed with C.P. brass/ stainless steel screws, complete all as specified and directed.
S&F powder coated anodised aliminum widnow and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fittings (all as per sample) such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos), tower bolt 100 mm long (02 No) and suitable handles 125 mm long (1 No) complete all as specified & directed.
S&F powder coated anodised aluminium doors 100mm x 40 mm x 3.15 mm side & top rail 150 mm x 40 mmx3.15 mm middle & bottom rails of side hung type without sash bars, aluminium sections including necessary joining cleats glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting (all as per sample) such as 150mm long lock (1 Nos), hinges type B-21 100mm long (3 Nos), 2 Nos tower bolt 150 long, suitable aluminium handles 150 mm long (2 Nos), aluminium door stoper complete all as specified & directed.
S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.
S&F Solar control film 25 micron reflective type (as per sample) sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F in repair Aluminium (extruded section) door closer hydraulically regulated designation No-3 , universal type , suitable foor door shutters of 851 to 1200mm in width and of weight between 61 to 80 kg complete all as specified and directed.
M&L for vitrified tiles double charged light shade 8-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:4) including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
All as above item 28 but over 10mm thick bedding layer of mortar in CM 1:4 as in dado/skirting etc.
M&L for rendering 15mm thick in CM 1:4 in two layers (10+5mm) on brick masonary of brick work surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified & as directed.
Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
Returning filling in, including spreading , levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.
M&L for 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, Solid PVC Partitions and the lile jointed with Solvent Cement and fixed at site complete all as specified and directed.
M&L for RCC M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat, rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed
M&L for 100 mm thick cement concrete type D-2,1:4:8 (40mm graded crushed stone aggregate) as in sub floors, sub bases,floors and pavings etc complete all as specified and directed.
M&L for 25 mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in sub floors for laying floor finish complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding layer of mortar in CM (1:4) under floor tiles complete all as specified & directed.
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed.
M&L for preparation of new plastered surface of walls/ceiling and applying three coats of white wash complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and ISI marked fixed complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed .
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. all as spd and directed
S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.
S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy chromium plated fancy type (as per sample) ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps long nose, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair towel rail, brass, CP 600 mm long 15mm dia pipe of 1mm thick complete all as specified and directed.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.
S&F Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, laid in floors with all fittings complete all as specified and directed.
S&F 75 mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F Cast iron branch pipece single of 75 mm bore or with parallel branches with oval access door complete all as specified and directed.
S&F Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.
S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.
S&F Cast iron cowl of 50mm bore complete all as specified and directed.
M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/fromwork set in cement mortar (1:6) complete all as specified and directed.
M&L Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.
S&F Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed.
S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
S&F Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.
M&L for 150 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy, fancy type, long neck, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.
S&F Jet Spray with 1.50 mtr tube (as per sample) and fixed complete all as specified and directed.
M&L concrete bed to drain pipes including forming cadles in cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate for 150 mm bore pipe complete all as specified and directed.
M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)
M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed
Extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
Surfaces excavtion n exc 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for 2000 ltr capacity, factory made LLDPE septic tank designed to carry sewage and sullage water, necessary excavation and earth work in any type of soil (excavation, returning filling in and removal of surplus soil), 150mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate foundation bed, 300mm fine sand filling to all around the tank, making Vent shaft, connection etc, complete all as specified & directed.
M&L Soakage wells of 2.4m dia, 3m depth including excavation and earth work in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry in CM 1:4, RCC in band, slab, cover, coping, bed block etc shall be M-25, filled with brick bats, cast iron vent pipe, cowl etc and removal of excavated earth to a distance not exc 50m complete all as specified and shown on TD drawings. Note: TD drawing shall be supplied by the Engineer in Charge.
Taking down carefully unsv copper/aluminium point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders etc and making good disturbed surface of wall/floor with cement mortar and finishes to match existing surface.
M&L Point wiring with 1.5 Sq. mm (nominal area) FRLS PVC insulated and sheathed multistranded copper conductor cable 1100 Volts grade with proper colour coding and 1.5Sqmm PVC insulated unsheathed copper conductor multistranded cable( green colour) as earth lead drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) not less than 20mm dia and thickness not less than 1.5mm with all accessories incl CI/MS terminal box of adequate size having thickness not less than 1.6mm including 3mm thick hylam sheet including cutting chases on wall and making good the disturbed surface complete connection of cable for one light/fan point controlled by one switch.
All as per Srl item No 107 here-in-before but for one 5/6 Amp socket outlet point on same board.
All as per Srl item No 107 here-in-before but for one 5/6 Amp socket outlet point on inependent board.
All as per Srl item No 107 here-in-before but using 2.5Sqmm (nominal area) multistranded copper conductor cable including 2.5 Sqmm size FRLS PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one power point on independent board complete all as specified and directed.
M&L Point wiring with 1.5 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade with proper colour coding and 1.5Sqmm PVC insulated unsheathed copper conductor multistranded cable( green colour) as earth lead drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) not less than 20mm dia and thickness not less than 1.5mm with all accessories incl CI/MS modular terminal boxes powder coated (16 gague) with cover plate(inner & outer) including cutting chases on wall and making good the disturbed surface complete connection of cable for one light/fan point controlled by one switch.
All as per ser item No 111 here in above but for 5/6 socket outlet point on same board.
All as per ser item No 111 here in above but for 5/6 socket outlet point on independent board.
All as per ser item No 111 here in above but using 2.5 Sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable including 2.5 Sqmm size FRLS PVC insulated unsheathed copper conductor multistanded cable (green colour) as earth conductor connected to common earth dolly for one power point on independent board.
S&F modular switch one way 6 Amp one module, front operated complete all as specified and directed.
S&F modular socket 6 Amp, 2/3 Pin multipurpose, 2 module with shutter complete all as specified and directed.
S&F modular switch piano type flush button single pole 16 Amp one module, front operated.
S&F modular socket 6Amp/16Amp, 6 Pin multipurpose, 2 module with shutter complete all as specified and directed.
S & F Fan regulator modular step type suitable for 1200mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed.
S & F switch piano flush button single pole one way 5/6 Amp AC 240 volts, all as specified and as directed.
S & F Socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type, AC 240 volts all as specified and as directed.
S & F Socket outlet 2 in 1, 5 pin, 6/16 Amps, flush type, AC 240 volts all as specified and as directed.
S & F switch piano flush type, single pole 15/16 amps, one way, AC 240 volts all as specified and as directed.
S & F stepped type (0-5 step) electronic fan regulator suitable for ceiling fan 1200mm sweep socket type in size and not less than 100 W flush type.
M&L for Lamp holder,fancy jumbo type, PVC/Polycarbonate type with back plate suitable for batten fittings including 15W LED Lamp complete all as specified.
M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.
S&F 20W surface / wall mounted box type batten LED luminaire 4feet long, extruded PC housing with diffuser and integrated electronic driver with high efficiency long life, PF > 0.95, system luminous efficacy ≥100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.
S&F 10W wall mounted box type batten LED luminaire 2 feet long, extruded PC housing with diffuser and integrated electronic driver with high efficiency long life, PF > 0.95, system luminous efficacy ≥100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PC body & diffuser with IP 66 protection with system efficacy≥100 lumens/Watt complete including connecting up with suitable size flexible copper conductor cable complete.all as specified.
Supply and fix recess mounted 2x2 LED 36 watt luminaire having polycarbonate housing with LEDs, white coloured flat acrylic cover with electronic driver and system efficacy≥100Lm/W including connecting up with cord flexible overall sheathed copper conductor cable of suitable size complete all as specified and directed.
M&L for distridution board iron clad VTPN DB double door with IP-43 protection and mechanical strength as IK-09 suitable for MCCB as incomer an MCB as outgoing 415V 3Phase 50Hz 4 Way incl polyuthrene gasket complete with appropriate size of copper bus bar and neutral link complete including one MCCB 4Pole 415V 63Amps rating,16kA with fixed thermal and fixed magnetic release of the same make as of distribution board incl making good the disturbed surface complete all as specified and directed. Note: (MCBs will be measured and paid saperately)
S & F in replacement SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for fixing of DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface.
All as per Ser item No 132 here in before but for 8way DB.
S&F MCB SP 240V, 50Hz, 10 KA, of rating 6 to 32 Amp using copper thimbles of required size all as specified and directed.
S&F MCB SPN 240V, 50Hz, 10 KA, of rating 40 Amp using copper thimbles of required size all as specified and directed.
S&F MCB TPN 240V, 50Hz of rating 63 Amp with breaking capacity of 10 kA having bi-connect terminals on the bottom terminals for looping and 35Sqmm termination capacity on both terminals with insulated sliding shutters and two position DIN rail clamp for easy mounting complete all as specified and directed.
S&F sub Main Wiring with two single core PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic concealed conduit medium grade with all accessories of dia not less than 20mm and 1.5mm thick incl cutting chases on wall and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface all as specified and directed. Note: 3 runs of copper conductor incl PVC conduit will be measured as one unit.
Taking down old ceiling fans and cleaning, greasing, servicing and carrying out minor repairs such as replacement of canopy set, clamps , fan blade screws, check nuts, down rod of required length and refixing at same location and connecting up with suitable size flexible copper conductor complete all as specified and directed.
Supply & laying in trenches or fixed to wall/pole or passing through pipe cable LT 1100 volts grade heavy duty,XLPE insulated , armoured heavy duty electric cable , with alumn conductor of any size 16 Sqmm x 4 core incl taking up/down old unsv service cable any size complete all as specified and directed.
All as per ser iterm No 139 here in before but for 16 Sqmm x 2core.
All as per ser iterm No 139 here in before but for 10 Sqmm x 2core.
M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable. Note: Only punned thickness i.e 18cm shall be measured and paid.
M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.
Material and labour for GI tubing light grade 40 mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole incl 2Nos of FI clamps of suitable size with nuts and bolts incl taking up/down old GI tubing complete all as specified and as directed.
M & L for earthing complete with G .l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground ( earth pit not less than 2.25 m deep below GL ) with top edge of the plate not less than 1.5 m below the normal ground level connected galvanized earth lead wire 4.0 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50mtr, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.
Supply and fixing of heavy duty 300 mm sweep, double ball bearing copper wounded metallic exhaust fan AC single phase 230/240 Volts having 1400+/-50RPM with minimum air delivery 1900 CMH including box type square shaped metallic louvers made out of powder coated CRCA sheet of thickness not less than 01 mm alongwith Aluminium flaps and fixed with grouting nut & bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all as specified and as directed.
Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 Star rated of ABS body vertical type, thermally insulated stainless steel tank of glass lined inside the tank alongwith heating element, syphon assembly and NRV, thermostate, indicators including steel braided flexible connection for pipe of size 15 mm dia bore with G.I hexagonal adopters / Nuts on both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangment and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as directed.
Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 56,537.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
yash paul gupta
VIKRAM SINGH MANHAS
M/S HIMANSHU BUILDERS
AV ENTERPRISES
RD Engineers
SUBASH MAHAJAN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .