Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹8.8 LAccepted-AOC BUILDING NO 594 NEW MAJRI COLLIERY POST SHIVAJI NAGAR TAHSIL BHADRAWATI DISTRICT CHANDRAPUR MAHARASHTRA | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-1 | Accepted-AOC Work awarded | |
| 2 | L-2₹8.9 L+₹11,344.35 (1.29%)Rejected-Finance AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR MS 442503 | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-2 | Rejected-Finance Due to L-2 bidder. | |
| 3 | L-3₹9.2 L+₹40,324.87 (4.60%)Rejected-Finance CAMP NEW MAJRI COLLIERY PO SHIVAJINAGAR TEHSIL BHADRAWATI DISTRICT CHANDRAPUR MS | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-3 | Rejected-Finance Due to L-3 bidder. | |
| 4 | L-4₹10.5 L+₹1.7 L (19.9%)Rejected-Finance AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442503 | L-4 | Rejected-Finance Due to L-4 bidder. |
Tender Value
₹11.8 L
EMD Value
₹14,800
Closing Date
23 Jan 2024, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), WCL, Majri Area.
At/Post Kuchana, Tahsil Bhadrawati, District Chandrapur (MS) 442503.
Renovation of Nehru Club at New Majri Sub Area under Majri Area.
2024_WCL_298332_7
ma4450-civ-e048-2023-24/767 Dated 12.01.2024
Open Tender
Civil Works - Others
Item Rate
60 days
New Majri Sub Area
Please refer Tender documents.
4 documents required · 4 mandatory
₹14,800
12 Feb 2024
12 Jan 2024
25 Jan 2024
13 Jan 2024
23 Jan 2024
13 Jan 2024
13 Jan 2024 - 20 Jan 2024
Amount
Providing of septic tank cleaning as per instruction of Engineer-in-charge, waste material unloading up to 1 Km lead.
Dismantling W.C. Pan of all sizes including disposal of dismantled material including malba all complete as per the direction of Engineer-in-charge.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), including pointing the joints with white cement andmatching pigment etc. complete
Providing and fixing on wall face unplasticised Rigid PVC rain water pipe conforming to IS:13592 Type A,including jointing with seal ring Conforming IS: 5382, leaving 10 mm gap for thermal expansion, (i) single socket pipe 110 mm diameter.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm bend.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25 mm nominal outer dia Pipes.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete with cement mortar 1:4 (1cement:4fine sand), including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks : 1:6 (1cement : 6 coarse sand).
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : for fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.
Providing and fixing 15mm thick false ceiling tiles at all heights with integral densified calcium siliate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fibre performance as per BS:476 (Part 6 & 7), numidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level on the existing frame work consisting of T-sections and L-sections suitably fixed according to tile size as per direction of Engineer-in-charge.
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
Total impact of GST for the purpose of CTC
RAJESH KUMAR SINGH
GEETA SINGH
AJIT KUMAR YADAV
techsummary_309029.pdf
PDF • 0.07 MB
finsummary_309029.pdf
PDF • 0.10 MB
AOC-1366.pdf
PDF • 1.50 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .