Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.1 LAccepted-AOC | 1 | Accepted-AOC L1 |
Tender Value
₹15.1 L
EMD Value
₹30,200
Closing Date
31 Aug 2021, 5:00 pmClosed
EXECUTIVE ENGINEER
WSS DIVISION BARNALA
Repair of OHSR, Repair of Pump Chamber, Providing laying , Stringing , Jointing, cutting and testing of PVC Pipes
2021_WB_69552_1
WSSD/Barnala/2021-22/30
Open Tender
Civil Works - Water Works
Item Rate
70 days
UGO KE
Please Refer Tender Documents
5 documents required · 5 mandatory
₹1
₹30,200
5 Jan 2022
6 Aug 2021
1 Sept 2021
6 Aug 2021
31 Aug 2021
6 Aug 2021
Amount
Repair of OHSR
Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects as per CSR 28.90
Repair of Pump Chamber
Scraping of White washing inside of Pump Chamber & Scraping of snowcem robbiacem etc as per CSR 8.31 (a)
White washing 2 coats inside of pump chamber. as per CSR 16.2
Distempering with dry distemper of approved manufacture One coat on Old distempered work as per CSR 16.8
Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade as per CSR 16.13
Painting Two or More coats with synthetic enamel paints in all shades on Old Wood Work or Metallic or plastered or concrete surface to give an even shade including rubbing down old paint. as per CSR 16.18
Applying priming coat with metal primer on new steel or iron work including preparation of surface. (Metalic) as per CSR 16.20
Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Metalic)) as per CSR 16.19
Supplying & fixing glass panes including special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area. as per CSR 18.25 (b)
Providing, Laying fixing & jointing of PVC pipes as per ISI-4985 (ISI marked with the prior approval of Engineer in charge) along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for more than 3 mtr street width including excavation & back filling complete in all respects as per Analysis-14A as per CSR 28.13
PVC pipe 63 mm o/d 6Kg sqcm
Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method including excavation , stringing and jointing of pipe as per CSR item 28.71
Connection of existing PVC/AC (All dia) pipe with new PVC (All dia) pipe including cost of PVC/AC tee, D-joint ,PVC saddle piece, earth work in excavation & back filling etc complete in all respects as per PWD Sepcification/Satisfaction of Engineer in charge .
Providing water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects as per site condition
Repair of water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class as per CSR 28.36 (A),( Above GL), Prov. & fixing MDPE pipe 20 mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects as per site condition Improvment of old Connections
Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kg cm^2 and suction lift not less than 1.5m as per DWSS standard Specification.
Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 1089 LPM against a head of 85.00 mtr (35.00 BHP) along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size 100 mm =51 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 10.00 mm^2 = 140 mtr (reputed make) complete in all respects as per standard Specifications.
Less Credit of Old Machinary ,Electrical Control Panel Board including Delivery
DEVELOPMENT OF HEAD WORKS SITE
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)
Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).
Painting & Writing MS Sign Board as per standard size of DWSS as per analysis A-24 Complete
PART-B (O & M) For 3 Month
Providing Bleaching Powder Solution/ Sodium Hypo Solution complete in all respects
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .