REPAIR REPLACEMENT OF FLOOR TILE PCC SANITARY FITTINGS PLUMBING AND OTHER CONNECTED BR WORKS AT D AND E BLOCK IN AOR OF AGE BR I UNDER GE NARANGI

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each removing to store complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq. m each removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

Material and labour 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area not exceeding 3 sqcm all as specified and directed.

Material and labour for 18-19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative lamination on both faces fixed with screws/nails to timber frame work complete all as specified and directed

Supply and fix 30 mm thick 2nd class HW rail and style Plain framed, panelled shutter (any nos of panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

Supply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

Supply and fix 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

Supply and fix 30 mm thcik flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supply and fix solid pre lam PVC door frame/CHOWKHAT of size 100mm x 45mm made out of 5mm plane PVC sheet reinforced with M.S. square tube 15mm x 15mm. The two vertical door profiles are to be reinforced with 40mm x 20mm MS tube 19 guage. Door frame need to be fixed to wall using 100 mm long MS screws etc complete all as specified and directed

Supply and fix factory made solid panel pre lam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes 19 guage thickness and size of 40mm x 20 mm for stiles, top,bottom and lock rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 30mm width stuck inside with solvent cement. 110 mm width forming stiles in which 100mmm should be flat and 5 mm should be tapered, and 5 mm thich, 135 mm wide prelam pvc sheet for top and bottom rail in wchich 125 should be flat and 5 mm should be tapered on either side of panel, also for lock rail 145 mm sheet, 125 should be flat and 5 mm tapered on either side. And additional 5 mm thich pvc strip struck inside of C channel. and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and directed

Material and labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and labour for preparation treating small articles such as stop, covers gully grating, holdfasts, ends of post backs of chowkats, etc. area n.exc 0.50 sqm each and applying tar or coal tar black paint to back of chowkats complete all as specified and directed

Material and labour for mild steel small articles such as clamps, hold fast, wind ties, bends, anchorage plate, clamps for holding RWP, brackets, suspenders for ceiling etc conforming to Fe-410-0 or Fe-310-0.complete all as specified and directed

Supply and fix pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and directed

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in back filling in pressed steel door and window frame, fixing of holdfast etc complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flap when open fixed to wooden frame or shutter any type with screw complete all as specified an directed.

Material and labour for 100 mm long Hasp and staple, safety type, aluminium anodised with MS hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 75 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Supply and fix in repair 200 mm long aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply and fix in repair 150 mm long aluminium anodised barrel tower bolts, of extruded section all as specified and directed

Supply and fix in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.

Supply and fix in repair 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix in repair 75 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix in repair 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

Supply and fix in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed.

Supply and fix in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed.

Supply and fix in repairs 20 mm dia anodised aluminium tubular curtains rod complete all as specified and directed.

Supply and fix in repair aluminium anodised brackets for curtain rod complete all as specified and directed.

Supply and fix in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 100 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.

Supply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Supply and fix in repairs, stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix sheet glass 3.0 mm thick ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.50sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed .

Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Supply and fix GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete

Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.

Supply and fix 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed.

Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr and writing the date of cleaning on water tank with white paint complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity up to 500 ltr and writing the date of cleaning on water tank with white paint complete all as specified and directed.

Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.

Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.

Supply and fix in repair Chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

Supply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair stop valves/angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.complete all as specified and directed.

Supply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.complete all as specified and directed.

Supply and fix in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.

Supply and fix in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed.

Supply and fix in repair 20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

All as per item No 64 here-in-before but 15 mm dia complete all as specified and directed.

Supply and fix in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.

All as per item No 66 here-in-before but 40 mm dia complete all as specified and directed.

Supply and fix in repair stainless steel grating with hole 100/125 mm dia fix with cement all as specified and as directed

Supply and fix in repair stainless steel grating without 100/125 mm dia fix with cement all as specified and as directed

Supply and fix in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed.

Supply and fix in repair CP soap dish fixed to wall with brass chromium plated screws complete all as specified and

Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed

Supply and fix in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete.

Supply and fix 0.56 mm thick plain aluminium sheeting alloy 31K00H4 for repair of door in lower portion complete all as specified and directed.

Supply and fix in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.

Supply and fix in repair glass shelf with chromium plated guard complete all as specified and directed.

Supply and fix in repairs 32/40mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

Supply and fix in repairs aluminium door seal complete all as specified and directed.

Supply and fix in repair stainless steel sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repair stainless steel sink made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,786mmX914mmX254mm fixed to wall with screws complete all as specified and as directed.

Supply and fix in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

Supply and fix in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

Dismantling PVC (SWR) pipe of any description complete all as directed

Supply and fix 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed

Supply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed.

Supply and fix in repair CP waste coupling complete all as specified and as directed.

Supply and fix in repairs, 75 mm dia PVC(SWR) floor trap/Nanhi trap, plain with grating including jointing with solvent cement complete all as specified and as directed

Demolition of concrete exc 15 cm thickness as in sunken floor & also removing the debris to the out side of MD land

Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

Material and labour for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer 1 mm wall care (putty) for making the surface even & smooth and applying two coats of oil bound distemper over a coat of Alkali resistant primer including necessary cleaning splashes of paints from window panes and floor etc complete all as specified.

Material and labour for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil bound distemper incl filling the holes and cracks with white cement so that the surace will appear smooth finish complete all as specified and directed.

Material and labour for preparation of old decorated wall surface and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of walls and aapplying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty, Make: Berger Weathercoat Anti Dustt or equivalent of Asian paint or Nerolac) over a coat of approved primer of same manufacturer complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty, Make: Berger Weathercoat Anti Dustt or equivalent of Asian paint or Nerolac) over a coat of approved primer of same manufacturer complete all as specified and directed.

Material and labour for preparation of new wood or wood based surface of any description n exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Material and labour 16-18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Material and labour non skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces with 15 mm thick screed bed in cement mortar (1:4) including dismantling of old unserviceable tiles complete all as specified and directed.

Material and labour for glazed light coloured/printed ceramic tiles 450x300x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 22-25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class "B" bricks, straight or curved on plan exc to any radius in half brick thick walls built in built in CM 1:4 complete all as specifed and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness ( below or above ground level) & also removing the debris to the out side of MD land

Material and labour for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement.

Material and labour for 50 mm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base etc finished even and rough to receiving top layers complete all as specified and as directed.

Taking down cement plaster/cement mud plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc.

Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC 200 ml/50 Kg wt of cement. WPC shall be measured and paid seperately.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement.

Supply only approved liquid water proofing compound.

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement (WPC shall be measured and paid seperately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming ti IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be less appliedb over bituminous primer as specified above over a application of polymeric membrane shall by torch application. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction

Material and labour for cutting and clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots etc from roof/wall for area not exceeding 1 Sqm in each job and removing rubbish off the premises including applying approved root killer chemical as per manufacturer's instructions and making good disturbed portion if required with PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) finished exposed surface of concrete even and smooth complete all as specified and directed.

M/s Talukdar Construction (BID ID -3080258)

S. R. TRADING (BID ID -3082908)

SANJAY KRISHNA HAZARIKA (BID ID -3080390)

SHANKAR ENTERPRISE (BID ID -3080198)

Goswami Traders (BID ID -3080755)

M/s JK Jangid and Company (BID ID -3081943)

M/S Abhishek Enterprise (BID ID -3082084)

M/S P&R CONSTRUCTIONS (BID ID -3083350)

KIRAN REED INDUSTRIES (BID ID -3080457)