REPAIR TO TRAVERS WALL STORM WATER DRAIN FENCING GATE COMPOUND WALL PATH AND HARD STANDING AT HEMRL UNDER GE RD PASHAN PUNE

Amount

Demolition of brick work or stone/boulder masonry /precast pcc block wall built in cement mortar or cement lime mortar including all quoins,pillars,arches etc, and clearing off the premises Complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Square metre on plan and not exceeding 1.5 metre in depth and getting out in hard dense soil Complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in fondation filling and mass concrete Complete all as specified and directed.

Material and labour for stone (granite or trap)Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 Complete all as specified and directed.

Material and labour for stone (granite or trap) Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but except stone using old serviceable stones Complete all as specified and directed.

Material and labour for pre-cast cement concrete block masonry 1:3:6 type C1 ( using 20mm graded crushed stone aggregate) with solid blocks exc. 10cm in width and setting in cement mortar 1:6 Complete all as specified and directed.

Extra over stone (Granite or Trap Stone)walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface Complete all as specified and directed.

Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses stone masonary in cement mortar 1:3 Complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement Complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forming, moulds, mitred/ stopped ends etc.Complete all as specified and directed

Material and labour for PCC 1:3:6 type C2, (using 40 mm graded crushed stone aggregates) as in surface channel and drains including necessary form work Complete all as specified and directed.

Cleaning of shurbs, growth on roof/wall of buildings of any type and of any height and making good the damaged portion in cement mortar 1:3 and finishing to match with the existing surfaces Complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in sub base Complete all as specified and directed.

Material and labour for cement concrete tiles 300 mm X 300 mm X 25mm thick, rubber moulded; glossy finish with white cement and pigments set, jointed and pointed in net cement slurryand pointed with white cement with pigment to match the shade of tile in floors and cut and polished laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 Complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment laid over and including 50mm thick dry sand cushion, fixed in repairs complete all as specified and as directed.

Removing excavated material to a distance exceeding 250metre but not exceeding 500metre and depositing where directed at a level not exceeding 1.5metre above the starting point Complete all as specified and directed.

Returning filling in including spreading ,levelling , watering and well ramming in layers not exceeding 25cm Complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.

Dismantling of wrought iron and steel work of any description and in any position as in fencing /grills Complete all as specified and directed.

Material and labour for cement concrete for copping in PCC 1:3:6 Type C-1( using 20mm graded crushed stone aggregate) including necessary formwork work Complete all as specified and directed.

Supply and fix Framed work such as grills, grating, with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe .290.Gde -E-165 Complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E-165) Complete all as specified and directed.

Supply and fixing in repairs Chain link mild steel galvanised fencing, any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire Complete all as specified and directed

Supply and fixing in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm long Complete all as specified and directed.

Supply and fix in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standared rail, straining bolt including provn of galvanised MS wire, staples or steel pins etc.Complete all as specified and directed. Note: Each line of wire to be measured.

Material and labour for preparation of new steel surfaces of any description not otherwise described exceeding 10cm in width or girth and applying with two coats of synthetic enamel paint over and including a coat of red oxide primer Complete all as specified and directed.

Material and labour for two coat of synthetic enamel paint to old steel surfaces over 10cm in width or girth including preparation of surfaces Complete all as specified and directed.

Supply and fix in repairs 110 mm dia PVC (SWR) pipes cut to size and fixed in walls as in weep holes Complete all as specified and directed.

Supply and Fixing in repairs 610 mm Super Reinforced Barb Helix Coil along with and including three nos. of Harpoon Ripper horizontal tension strands on existing "Y"angle posts over the boundary wall.The three tension strands should be fixed at the end of the three Running metres of the existing "Y" angle and the helix of 700mm should be placed in between these three wires so as to circumscribe the angle . The three straight strands of SRPBT should be fixed to these angles after applying the required tension by Tensioner Machine and fixed by Box clipping (3/8") at tensioning points so that these wires retains the tension. The helix of RPBT is to be fixed in such a manner that it touches at least one of the three tensioning wires passing along the three Running metres of the "Y" angle with minimum 6 spirals per Running meter of fence, thus circumscribing the angle with equal clip to clip spacing . One number "J" clipping is to be done along the length of the fence at one meter interval for fixing the coils alternately to the individual strands with minimum three "J" clippings at each joint of two corresponding coils or horizontal strands complete all as specified and directed.

Material and labour for 100 mm thick Cement concrete 1:4:8 type D-2, ( using 40 mm graded crushed stone aggregate) as in sub base Complete all as specified and directed.

Material and labour for 100 mm thick Cement concrete 1:2:4 type B -1, ( using 20mm graded crushed stone aggregate) as in hardstanding finished fair and even surfaces without using extra cement Complete all as specified and directed.

Material and labour for two coats of weather coat (Exterior) all guard emulsion, any colour/tined to newly plastered surface of wall over and including a coat of acrylic primer including preparation of surface complete Complete all as specified and directed.

Material and labour for Hand packing of broken stone or boulders (any thickness) at the back of walls over arches etc. and raising (or lowering) to the required level including taking out old packing and removal Complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete al as pecified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding. 30cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exceeding 1.5 metre high from base Complete all as specified and directed.

Rays Breakers

MANISH VEDPRAKASH ARORA

Baljeet Singh Choudhari

AJAY ENTERPRISES

M/S SAMRUDHI CONSTRUCTION