Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹2.5 L
Closing Date
24 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
15 conditions · 4 needing a document upload
Financial Eligibility Criteria : The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The individual/firm should have valid "B" grade electrical license and should be on their own name/firm name issued by the competent Authority. A copy of license should be uploaded through IREPS with their offer, failing which the tender WILL BE REJECTED.
Similar nature of work: - "Works of Installation, testing and commissioning of motor driven pump sets (with or without supply of motor/pump sets)". (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 30.12.2014.)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
37 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the annexed documents to the tender. Hard copy may be perused in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway / Secunderabad - 500025. In submitting the tender it would be deemed that the tenderer has kept himself fully Informed of the provision of the Indian Railways Standard General Conditions of Contract including all corrections and Amendments issued upto date and claim that he is not aware of any amendment or correction slip to the IRSGCC shall not be entertained.(As per IRGCC April 2022 or latest with amendments).
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway/ Secunderabad - 500025. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.(As per IRGCC April 2022 or latest with amendments).
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalised by the Railway and will, therefore, be supplied to the contractor as and when they are finalised on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.(As per IRGCC April 2022 or latest with amendments).
Manual tenders sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED (As per IRGCC April 2022 or latest with amendments).
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. (As per IRGCC April 2022 or latest with amendments).
CORRIGENDUM NOTICE ON IREPS: [I] Railway may modify the tender document by issuing online corrigendum through www.ireps.gov.in [II] Prospective Bidders shall keep watch for CORRIGENDUM upto 15 days prior to the deadline for submission of bids. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer. [III] To give prospective bidders a reasonable time on account of CORRIGENDUM in preparing their bids, the Railways may at their discretion extend as necessary, the deadline for submission of Tender document. Railways decision will be final and no correspondence will be entertained from prospective bidders. (As per IRGCC April 2022 or latest with amendments).
E-Tender shall be rejected if it is not accompanied by the prescribed: [1] Cost of tender document [2] EMD [3] Certificate(s) in support of technical eligibility criteria [4] Certificate(s) in support of financial eligibility criteria [5] Copy of documents in support of Proprietary concern/ Partnership firm / Pvt.Ltd.company / Limited Company / JV firm / Valid MOU for JV firms as detailed in COMMERCIAL COMPLIANCE. (As per IRGCC April 2022 or latest with amendments).
The bidders/tenderers should ensure that they are GST compliant. Quoted rates are inclusive of applicable GST as per GST ACT -2017 amended from time to time and as detailed in Special Conditions - General (under TAXES clause). (As per IRGCC April 2022 or latest with amendments).
The tenderer[s] may also upload the following documents alongwith his/their tender: The tenderer may upload method statement, which shall contain organizational set up and working systems to be adopted by the successful tenderers during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and inturn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall adhere to the time frame as mentioned in mile stone chart prescribed in the tender. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall engage the personnel with requisite qualification as per Special Conditions of Contract. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall deploy adequate number of plant and equipment for the execution of subject contract works to achieve progress as per mile stone chart. (As per IRGCC April 2022 or latest with amendments).
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given. (As per IRGCC April 2022 or latest with amendments).
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award. (As per IRGCC April 2022 or latest with amendments).
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed. (As per IRGCC April 2022 or latest with amendments).
[1] I/We have read the various conditions of the tender attached hereto and hereby agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for the period mentioned in the tender document [NIT HEADER] from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our Earnest Money Deposit submitted. [2] I/We offer to do the work at the percentage rates quoted by me/us in the attached schedule and bind myself/ourselves to complete the work within the period of completion given in this tender document [NIT HEADER] from the date of issue of letter of acceptance of this tender. I/We also hereby agree to abide by the IRS GCC and Special Conditions of contract in carryingout the works laid down by South Central Railway for the present contract. [3] The full value of the earnest money paid shall stand forfeited without prejudice to any other rights or remedies of the railway if [a]I/We do not execute the contract document within seven days after receipt of notice issued by the Railway that such documents are ready: OR [b] I/We do not commence the work within fifteen days after receipt of orders to that effect. [4] Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work. (As per IRGCC April 2022 or latest with amendments).
I/We fail to submit the requisite Performance Guarantee [P.G] in the prescribed format within the time limit as prescribed in GCC (as amended from time to time) from the date of issue of Letter of Acceptance, we are aware that the contract shall be terminated duly forfeiting EMD and other dues, if any payable against the contract. Also, I/We shall be debarred from participating in the retender for the work. (As per IRGCC April 2022 or latest with amendments).
I/We understand that no post-tender correspondence will be entertained, however, if any clarification is required by the Railway, the same will be sought from the tenderer. Also, I/We are aware that any Certificate/ Documents offered after the tender opening shall not be given any credit and shall not be considered. (As per IRGCC April 2022 or latest with amendments).
I/we do hereby solemnly affirm and state on behalf of the tenderer including its constituents as under: (As per IRGCC April 2022 or latest with amendments).
[i] I/We the tenderer(s) am/are signing this document after carefully reading the contents. [ii] I/We declare and certify that I/We have not made any misleading or false representation in the documents, forms, statements attached in proof of the qualification requirements. [iii] I/We also understand that my/our offer will be evaluated based on the documents/credentials uploaded alongwith the offer and the same shall be binding upon me/us. [iv] I/We declare that the information and the documents attached alongwith the tender by me/us are correct and I/We are fully responsible for the correctness of the information and the documents submitted by us. (As per IRGCC April 2022 or latest with amendments).
[i] I/We do hereby undertake that, if any of the certificates regarding eligibility criteria submitted by us are found to be forged/false/incorrect at any time during the process of evaluation of the tenders, it shall lead to forfeiture of the tender EMD. Further, I/We and all my/our constituents understand that my/our offer shall be summarily rejected. [ii] I/We also understand that, if the certificates submitted by us are found to be false/forged/ incorrect at any time after the award of the contract, it will lead to termination of the contract besides suspending of business for 5 years, with the tenderer and with all the partners in case of partnership firm and with all the members of a JV in case of a Joint Venture, forfeiture of EMD/SD and Performance Guarantee and any other action provided in the contract. (As per IRGCC April 2022 or latest with amendments).
It is certified that I/We have not been blacklisted or debarred by railways or any other ministry/ department/public sector undertaking of the government of India/State Government from participation in tenders/contract on the date of tender opening of bids, either in individual capacity or as a member of JV firm in which I/We were/are members. (As per IRGCC April 2022 or latest with amendments).
I/We indemnify and save harmless the Railway from and against all actions, suit proceedings losses, costs, damages, charges, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the Contractor, his agents or employees, in the execution of the works or in his guarding of the same. All sums payable by way of compensation under any of these conditions shall be considered as reasonable compensation to be applied to the actual loss or damage sustained, and whether or not any damage shall have been sustained. (As per IRGCC April 2022 or latest with amendments).
The prices are inclusive of GST
Secunderabad Division Electrical Maintenance Department - Provision of Ballast less track and quick watering arrangements for Road No. 1 & Road No.3 at Bidar Railway Station - Electrical arrangements.
E-M-SC-44-OT-2025-26
E-M-SC-44-OT-2025-26
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹2.5 L
24 Mar 2026
2 Mar 2026
10 Mar 2026
175 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,99,30,111 | ||
| — | 3.00 | — | — | ||
| Supply,installation and commissioning of Supply of 60HP Horizontal split case casing pump, std. fitted with Non-clog C.I, Impeller and gland packing, the Pumping system total flow capacity range 5333 LPM and the minimum discharge head to be 35 mts, Normal speed 1450 Rpm, water cooled pump with 1no of 60 HP 1440 RPM + _ 10% (SYN) TEFC ,415Volts , 50 Hz,3phase class 'F' Insulation, Horizontal foot mounted squire gauge induction motor, fabricated, MS Base frame, coupling, Coupling guard and foundation bolts for the pump & Motor. | — | — | — | 32,51,100 | |
| — | 2.00 | — | — | ||
| Supply ,installation and commissioning of Supply of Electrical operated 200 mm CI valve, suitable for automation | — | — | — | 5,77,424 | |
| — | 2.00 | — | — | ||
| Supply and erection o f 200 mm Flow Meter, both ends flanged, suitable for the delivery line of the pumping system. | — | — | — | 5,22,980 | |
| — | 2.00 | — | — | ||
| Supply and erection of Electrical Operated Valve accessories suitable for 200mm dia | — | — | — | 41,032 | |
| — | 500.00 | — | — | ||
| Supply and erection for 1.5 Sq.mm, 6 Core multi stranded coppercable for electric control wiring of control valves all asspecified and as directed. | — | — | — | 71,000 | |
| — | 3.00 | — | — | ||
| Supply,Installation, suit/requirements of valve | — | — | — | 3,67,095 | |
| — | — | — | relief | ||
| — | 1.00 | — | — | ||
| Supply ,installation and commissioning of microprocessor type PLC based with dedicated VFD for each pump automatic Smart control panel SCADA enabled suitable for operation of system. The control panel will have protection like-over/under voltage, dry run protection, over/under current, phase reversal protection, single phasing protection. The control panel should be having remote monitoring/control system for operation and observation both through GSM/WIFI based communication. The control panel should be programmed in such a manner so that the VVFD can operate up to 110% of total load condition if at any point of time on a multiple pressure variation water flow required. The control panel shall have cascade bypass operation due to failure of drive the pump will operate on direct mode. HMI touch screen display will be on the control panel body for operation. All MCCB's will be microprocessor based. | — | — | — | 10,96,000 | |
| — | 1.00 | — | — | ||
| Design, install, testing and commissioning of SCADA for 200 Tab data analysis including of desk top PC, LED display 32" Keyboard, printer and licensed viewing system for Two integrated remote installed office PCs through team viewer through internet connection and allied accessories complete | — | — | — | 4,12,000 | |
| — | 6.00 | — | — | ||
| Supply and erection of pump suction/delivery fittings suitable size of 400 mm bend couplings ,flanges, nipples ,blots& nuts ,flange washers. | — | — | — | 3,07,800 | |
| — | 3.00 | — | — | ||
| Supply and erection of 3"dia 0-10 kg/cm2 pressure gauge with Suitable accessories | — | — | — | 20,790 | |
| — | 3.00 | — | — | ||
| Supply and erection of 400mm dia DI Non Return Valve. | — | — | — | 4,21,500 | |
| — | 6.00 | — | — | ||
| Supply and erection of 400mm dia DI sluice valve . | — | — | — | 11,28,000 | |
| — | 1.00 | — | — | ||
| Supply and erection of 300mm DI Non Return Valve. | — | — | — | 1,18,000 | |
| — | 1.00 | — | — | ||
| Supply and erection of 300mm DI sluice valve. | — | — | — | 1,64,200 | |
| — | 3.00 | — | — | ||
| Supply, Erection, testing and commissioning of flow meter suitable for 400 mm dia pipe line | — | — | — | 13,62,300 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of suitable pressure transmitter. | — | — | — | 73,800 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of suitable water level transmitter for measuring and communicating lower, middle and top levels of water | — | — | — | 1,06,200 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of suitable PH/Temperature(Any) sensor | — | — | — | 35,700 | |
| — | 30.00 | — | — | ||
| Supply and fabrication of 300 mm dia MS pipe, wall thickness: 5.5mm with suitable flanges with bolts & nuts. | — | — | — | 1,47,900 | |
| — | 50.00 | — | — | ||
| Supply and fabrication of 400 mm dia MS pipe, wall thickness: 6.35 mm with suitable flanges with bolts & nuts. | — | — | — | 3,83,500 | |
| — | 2.00 | — | — | ||
| Supply and erection of 500 mm dia MS common manifold with suitable flanges to connect between 3 No's of HSC pumps delivery outlet and suitable in to existing dia delivery& Suction pipe line. | — | — | — | 5,50,000 | |
| — | 90.00 | — | — | ||
| Supply of 3 core 50 sq.mm E.C grade copper flexible multi strand copper conductor with PVC insulated and PVC sheathed from VFD panel to pump. | — | — | — | 2,55,510 | |
| — | 4.00 | — | — | ||
| Supply and erection of earth electrodes i.e., copper bonded high tensile low carbon steel electrode of with minimum 3mtrs. Long, 17 mm dia with copper coating thickness of min 250 microns and current carrying capacity of min 15 KA for 1 sec for maintenance free earthing as per RDSO specification No.No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest | — | — | — | 16,500 | |
| — | 200.00 | — | — | ||
| Supply and filling of Earth enhancing materials for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/ 0109 (Rev.0)-2008(Amdt-1) latest. | — | — | — | 52,000 | |
| — | 2.00 | — | — | ||
| Supply and fixing of copper bus bar 50x 6mm for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) latest. | — | — | — | 8,000 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 25x3 mm EC grade copper strip for connecting earth terminal to the bus bar in equipment roomfor maintenance free earthing as per RDSO spec no. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) or latest | — | — | — | 3,196 | |
| — | 4.00 | — | — | ||
| Earth chamber with LID 100x250x250 mm for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest. | — | — | — | 2,800 | |
| — | 80.00 | — | — | ||
| Supply & laying of 35mm cable from pit to main equipment bus bar including bolts, nuts & HDPE pipes for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109(Rev.0)-2008 (Amdt-1) latest. | — | — | — | 19,200 | |
| — | 8.00 | — | — | ||
| Supply & providing of exothermic weld connection for maintenance free earthing as per RDSO specification No. RDSO/PE/SPEC/PS/0109 (Rev.0)-2008 (Amdt-1) latest. | — | — | — | 4,992 | |
| — | 2.00 | — | — | ||
| Concrete for foundations and plinth in hard soil. | — | — | — | 8,584 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench across No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 53,000 | |
| — | — | — | Rly | ||
| — | 200.00 | — | — | ||
| Horizontal drilling of bores for LT cables | — | — | — | 2,53,800 | |
| — | 300.00 | — | — | ||
| Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site making good after laying the cable | — | — | — | 39,000 | |
| — | 300.00 | — | — | ||
| Excavation of cable trench in Tar road surface as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 64,800 | |
| — | 200.00 | — | — | ||
| Supply and erection of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) | — | — | — | 83,400 | |
| — | 180.00 | — | — | ||
| Supply and erection of 100 mm 'B' class GI pipes as per IS:1239 along with accessories. | — | — | — | 1,60,740 | |
| — | 700.00 | — | — | ||
| Supply and erection of 4 core x 240 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments) along with end terminations | — | — | — | 9,38,700 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 4 core x 120 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments) along with end terminations | — | — | — | 8,75,000 | |
| — | 8.00 | — | — | ||
| Supply and fixing of weather proof (W/P) IP 65 polycarbonate enclosure with 4Nos terminals to suite above 70sq.mm and upto 120Sq.mm power cable terminals, 1No. cable entry flange. Make:M/s. Hensel cat No. Mi0301 or Spelsberg/HPL/L&T/Indo-Asian only with all connected accessories etc. | — | — | — | 62,400 | |
| — | 300.00 | — | — | ||
| Supply and erection of 4 core x 70 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments) along with end terminations | — | — | — | 1,66,800 | |
| — | 1700.00 | — | — | ||
| Supply and erection of 8 SWG GI Wire | — | — | — | 17,000 | |
| — | 1.00 | — | — | ||
| Supply, intallation testing and commissioning of 250KVA DG set with AMF Panel along with all the connectted accessories. | — | — | — | 23,36,525 | |
| — | 1000.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 6 Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 2,60,000 | |
| — | 2.30 | — | — | ||
| Design,fabrication,supply,erection,testing,Commissioningof Indoor LT panel board ( Powder coated RAL 7032 )with suitable Busbar capacity including supply and fixingof Digital MFM, digital votmeter, digital ammeter withCTS, indication lamps complete with all accossories, forhousing of 2x250A 4P MCCBs for I/Cs and outgoings1x250A COS, 4x160A 4Pole MCCBs, MCCBs,02x63A 4PMCCBs ,02x32A 4P and complete with accessories, etc.Before fabrication drawing approval is to be taken fromSr.DEE/M/SC. | — | — | — | 2,60,806.2 | |
| — | 4.00 | — | — | ||
| Supply and erection of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with spereder links(4 nos-02 sets), phase barriers | — | — | — | 1,18,792 | |
| — | 4.00 | — | — | ||
| Supply & Erection of 160A 4 pole MCCB with 25KA breaking capacity with Adjustable thermal magnetic release with extended ROM, spereder links(4 nos-02 sets), phase barriers | — | — | — | 1,09,238.8 | |
| — | 4.00 | — | — | ||
| Supply and erection of 63A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release | — | — | — | 16,140 | |
| — | 4.00 | — | — | ||
| Supply and erection of 32A 4 pole MCCBs with 16 KA breaking capacity with Adjustable thermal magnetic release | — | — | — | 16,140 | |
| — | 1.00 | — | — | ||
| Digital multi function panel meter complete with CTs with RS485 port | — | — | — | 7,010 | |
| — | 4.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 7.5 HP 82 stage Energy efficient Vertical submersible pump set , Three Phase ,415 Vol, suitable for 100mm dia bore well pump set Delivery size : 32mm, Head 450 Mtr ,LPM :48, RPM :2880. | — | — | — | 2,90,692 | |
| — | 3.00 | — | — | ||
| Supply, rection, connecting, testing and commissioning of 5.0 HP 43 stage Energy efficient Vertical submersible pump set , Three Phase ,415 Vol, suitable for 100mm dia bore well pump set Delivery size : 32mm, Head 284 Mtr ,LPM @ 58"44@ RPM :2880 | — | — | — | 1,95,300 | |
| — | 3.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 3.0 HP 30 stage Energy efficient Vertical submersible pump set , Three Phase ,415 Vol, suitable for 100mm dia bore well pump set Delivery size : 32mm, Head146 Mtr ,LPM :36, RPM :2880. | — | — | — | 1,34,520 | |
| — | 3.00 | — | — | ||
| Supply, fabrication and fixing and commissioning of pump panel suitable for 3HP centrifugal/Submersible pump comprising of motor protection circuit breaker, DOL starter, electronic over current relay, 1KVAR capacitor, ammeter, voltmeter, LED pilot lamps, timer switch complete with all other connected accessories | — | — | — | 49,200 | |
| — | 3.00 | — | — | ||
| Supply, fabrication and fixing and commissioning of pump panel suitable for 5HP centrifugal/Submersible pump comprising of motor protection circuit breaker, DOL starter, electronic over current relay, 2KVAR capacitor, ammeter, voltmeter, LED pilot lamps, timer switch complete with all other connected accessories | — | — | — | 51,900 | |
| — | 4.00 | — | — | ||
| Supply, fabrication and fixing and commissioning of pump panel suitable for 7.5HP pump comprising of motor protection circut breaker, fully automatic star delta starter, electronic over current relay, 3KVAR capacitor, LED pilot lamps, timer switch, auto/manual change over switch suitable to with stand for 7.5 HP motor including all other connected accessories complete | — | — | — | 1,18,640 | |
| — | 10.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of 60 W LED Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed | — | — | — | 28,100 | |
| — | 850.00 | — | — | ||
| Supply and erection of 4 core x50 Sqmm LTUG XLPE Aluminum armored cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations | — | — | — | 3,38,300 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 4 core 25 sqmm LTUG XLPE aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ) along with end terminations | — | — | — | 2,44,000 | |
| — | 2000.00 | — | — | ||
| Supply and erection of 4 core x16 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 3,50,000 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 3Nos.. of 1.5 Sq.mm, of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 55,000 | |
| — | 600.00 | — | — | ||
| Supply and erection of 2Nos.. of 1.5 Sq.mm, of FRLS PVC insulated flexible multistrand copper wire | — | — | — | 20,400 | |
| — | 500.00 | — | — | ||
| Supply and erection of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLS PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 36,000 | |
| — | 200.00 | — | — | ||
| Supply & Erection of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 5,800 | |
| — | 150.00 | — | — | ||
| Supply & Erection of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 5,850 | |
| — | 100.00 | — | — | ||
| Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe. | — | — | — | 3,900 | |
| — | 8.00 | — | — | ||
| Supply & Erection of 6 module GI concealed sheet metal boxes | — | — | — | 680 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 8 or 9 module GI concealed sheet metal boxes | — | — | — | 1,332 | |
| — | 6.00 | — | — | ||
| Supply & Erection of 12 module GI concealed sheet metal boxes | — | — | — | 822 | |
| — | 8.00 | — | — | ||
| Supply & Erection of 6 module modular plates with frame | — | — | — | 992 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 8 or 9 module modular plates with frame | — | — | — | 1,908 | |
| — | 6.00 | — | — | ||
| Supply & Erection of 12 module modular plates with frame | — | — | — | 1,188 | |
| — | 8.00 | — | — | ||
| Supply and erection of 10 A sp modular MCB | — | — | — | 2,608 | |
| — | 55.00 | — | — | ||
| Supply & Erection of 10A 1-way switch | — | — | — | 2,420 | |
| — | 20.00 | — | — | ||
| Supply & Erection of 10A multi socket for cell phone pin or 2pin +3 pin with safety shutter | — | — | — | 2,060 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 6&20A twin socket heavy duty socket with safety shutter | — | — | — | 2,112 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 20A one way modular switch | — | — | — | 1,212 | |
| — | 6.00 | — | — | ||
| Supply & Erection of Angle Holder | — | — | — | 162 | |
| — | 3.00 | — | — | ||
| Supply and erection of BLDC fans with remote | — | — | — | 7,380 | |
| — | 4.00 | — | — | ||
| "Supply and erection of Modular type exhaust fan 300mm/380mm" | — | — | — | 6,220 | |
| — | 12.00 | — | — | ||
| Supply of integrated T8 20W LED (indoortype) tube light fixture complete withnecessary mounting accessories, clampsand hardware etc. as per specification enclosed. | — | — | — | 4,944 | |
| — | 6.00 | — | — | ||
| Supply of surface mounted LED 40W luminaire battentype fitting complete with necessary mountingaccessories, clamps and hardware etc. as per as per specification enclosed. | — | — | — | 3,936 | |
| — | 10.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 150 W LED flood light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 68,080 | |
| — | 10.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 200 W LED Flood light in fixture complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 86,850 | |
| — | 120.00 | — | — | ||
| Supply, fixing, connecting and commissioning of Recess circular Round LED down light of 24W ClassLED fitting with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 1,69,920 | |
| — | 1.00 | — | — | ||
| Supply and erection of Time switch daily operating type | — | — | — | 4,288 | |
| — | 1.00 | — | — | ||
| Supply,erection, connecting, testing and commissioning of 5.5KVA portable silent Generator set similar to EU70is of Honda make. | — | — | — | 2,65,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1_Tender_Booklet_E_M_SC_44_PA_OT_2025_26.pdf Tender Booklet
ATTACHMENT
2_GCC_April-2022_withcorrectionslips.pdf
ATTACHMENT
1_Tender_Booklet_E_M_SC_44_PA_OT_2025_26.pdf
ATTACHMENT
Tender_Booklet_E_M_SC_44_PA_OT_2025_26_Corrigendum.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .