Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC | L1 | Accepted-AOC TENDER FOUND LOWEST, HENCE TENDER ACCEPTED | |
| 2 | L2₹29.4 L+₹4.3 L (17.3%)Rejected-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L2 | Rejected-AOC not lowest | |
| 3 | L3₹31.6 L+₹6.5 L (25.8%)Rejected-AOC | L3 | Rejected-AOC not lowest | |
| 4 | L4₹31.7 L+₹6.6 L (26.2%)Rejected-AOC 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500 015 | SECUNDERABAD | HYDERABAD | TELANGANA | 500015 | L4 | Rejected-AOC not lowest | |
| 5 | L5₹31.9 L+₹6.8 L (27.2%)Rejected-AOC | L5 | Rejected-AOC not lowest |
| Sl No | Description | Qty | Unit | R G NAIDU CIVIL CONTRACTOR AND BUILDERS L2 | harshraj and co L3 | RAGHAVENDRA CONSTRUCTIONS L1 | ATUL ENTERPRISES L4 | M/S DIVIJA BUILDERS L5 | SUN AND SAND BUILD TECH L6 | GUTHIKONDA BROTHERS L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of mild steel/structural steel work of any description incl door/gates/grills/fencing post etc complete all as specified and directed. | 28 | Qtl | 250 ₹7,000 | 500 ₹14,000 | 200 ₹5,600 | 150 ₹4,200 Lowest | 200 ₹5,600 | 250 ₹7,000 | 275 ₹7,700 |
| 2.00 | Dismantling fencing wire mesh, any type complete all as specified and directed. | 450 | Sqm | 10 ₹4,500 | 20 ₹9,000 | 15 ₹6,750 | 15 ₹6,750 | 9 ₹4,050 Lowest | 20 ₹9,000 | 40 ₹18,000 |
| 3.00 | Supply & fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)). | 1,200 | Kg | 101 ₹1,21,200 | 140 ₹1,68,000 | 85 ₹1,02,000 Lowest | 90 ₹1,08,000 | 105 ₹1,26,000 | 120 ₹1,44,000 | 125 ₹1,50,000 |
| 4.00 | Supply only galvanised chain link fencing, of any size complete all as specified and directed. | 1,600 | Kg | 130 ₹2,08,000 | 180 ₹2,88,000 | 90 ₹1,44,000 Lowest | 120 ₹1,92,000 | 120 ₹1,92,000 | 150 ₹2,40,000 | 150 ₹2,40,000 |
| 5.00 | Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provision of binding wire complete all as specified and directed. | 450 | Sqm | 65 ₹29,250 | 30 ₹13,500 Lowest | 45 ₹20,250 | 65 ₹29,250 | 60 ₹27,000 | 150 ₹67,500 | 40 ₹18,000 |
| 6.00 | S&F in repairs Galvanized 2 stranded steel barbed wire 2.24 mm dia ,barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standards, rails, straining bolts including securing or tying at the crossing with and provision of Galvanized MS wires or steel pins complete all as specified and directed. (Each line of barbed wire to be measured separately) | 5 | Per 100 Rm | 2,200 ₹11,000 | 3,000 ₹15,000 | 1,850 ₹9,250 | 2,000 ₹10,000 | 1,100 ₹5,500 Lowest | 1,200 ₹6,000 | 2,000 ₹10,000 |
| 7.00 | S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide complete all as specified and directed. | 350 | Kg | 90 ₹31,500 | 100 ₹35,000 | 80 ₹28,000 Lowest | 90 ₹31,500 | 90 ₹31,500 | 120 ₹42,000 | 85 ₹29,750 |
| 8.00 | M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm complete all as specified and directed. | 40 | Kg | 110 ₹4,400 | 100 ₹4,000 | 80 ₹3,200 Lowest | 200 ₹8,000 | 150 ₹6,000 | 150 ₹6,000 | 150 ₹6,000 |
| 9.00 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in cooping complete all as specified and directed. | 4 | Cum | 4,500 ₹18,000 | 4,000 ₹16,000 | 4,800 ₹19,200 | 3,500 ₹14,000 Lowest | 3,600 ₹14,400 | 5,200 ₹20,800 | 4,000 ₹16,000 |
| 10.00 | S&F for Framed work such as grills, gratings, Gate etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. | 1,600 | Kg | 120 ₹1,92,000 | 130 ₹2,08,000 | 90 ₹1,44,000 Lowest | 125 ₹2,00,000 | 110 ₹1,76,000 | 120 ₹1,92,000 | 150 ₹2,40,000 |
Tender Value
₹48.8 L
EMD Value
₹98,000
Closing Date
8 Dec 2025, 6:00 pmClosed
MASUD ALI, IDSE, GE (South) Secunderabad
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
REPAIR/REPLACEMENT FENCINGS, COMPOUND WALLS, DRAINS, PATHWAYS, HARD-STANDINGS AND OTHER MISCELLANEOUS B/R WORKS OF OTM AND MD ACCN AT MH AREA UNDER AGE B/R (SOUTH) NO. I OF GE (SOUTH) SECUNDERABAD
2025_MES_740176_1
GE(S)/SEC/TOKEN-76 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i) and for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GE SOUTH, MUDFORT, SECUNDERABAD
₹98,000
Yes
3 Feb 2026
17 Nov 2025
11 Dec 2025
17 Nov 2025
8 Dec 2025
2 Dec 2025
17 Nov 2025 - 1 Dec 2025
Amount
Dismantling of mild steel/structural steel work of any description incl door/gates/grills/fencing post etc complete all as specified and directed.
Dismantling fencing wire mesh, any type complete all as specified and directed.
Supply & fabricate and fixing in position angle iron posts for fencing posts and struts including flat iron etc and including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets for securing fencing including all necessary welding , drilling, bolting or riveting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)).
Supply only galvanised chain link fencing, of any size complete all as specified and directed.
Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provision of binding wire complete all as specified and directed.
S&F in repairs Galvanized 2 stranded steel barbed wire 2.24 mm dia ,barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standards, rails, straining bolts including securing or tying at the crossing with and provision of Galvanized MS wires or steel pins complete all as specified and directed. (Each line of barbed wire to be measured separately)
S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide complete all as specified and directed.
M & L for Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends each screw-wed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long diameter of neck in exc 16mm and n.exc 20 mm complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in cooping complete all as specified and directed.
S&F for Framed work such as grills, gratings, Gate etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
Demolition of Bricks or stone masonry built in cement mortar complete all as specified and directed.
M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.
M&L for walling of squared rubble masonary (Secunderabad type) , recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (20mm graded stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar complete all as specified and directed.
Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debrie complete all as specified and directed.
M & L for Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain by using water proofing compound etc complete all as specified and directed.
M&L for flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed
Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) complete all as specified and directed.
M&L PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified & directed
M&L for Plain cement concrete type C2(1:3:6)( using 40mm graded crushed stone aggregate) as in surface chanels and drains complete all as specified and directed.
M & L for Plain cement concrete type-B1(1:2:4) (using 20mm graded crushed stone aggregate ) as in benching coping etc incl necessary form work.complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
M&L for 75mm thick plain cement concrete in (1:3:6) type C1 using 20 mm graded crushed aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for 100mm thick PCC (1:2:4) type B2 (using 20mm graded crushed stone aggregate) as in floor, hard standing including use of formwork and finishing surfaces even and smooth complete all as specified & directed
M&L for 150mm thick PCC 1:2:4 (using 20m graded crushed stone aggregate) as in paving/hardstanding including use of necessary form work complete all as specified and directed.
M&L for forming 12mm thick Expansion joints for150mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’ complete all as specified and directed.
Demolition of RCC cover slab for manholes etc. complete all as specified and directed.
M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, (using 20 mm graded crushed stone aggregate as in cover slab for manholes etc.and set in cm 1:6 complete all as specified and directed.
S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.
M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified and directed.
S&F 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
S&F for chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed of cement mortor (1:6) in floors complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surfaces over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surfaces of concrete and plaster surface exceeding 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.
M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface which undulation found with cement putty etc. complete all as specified and directed.
M&L for preparation of old surfaces of walls and applying one coat of cement base paint including filling of cracks, holes and including leveling the surface wherever undulation found with cement putty etc complete all as specified and directed.
M & L for preparation of old plastered or unplastered surfaces on walls including cornices and applying one coat of exterior emulsion paint (weather coat paint) complete all as specified and directed.
Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and directed.
S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall/trenches etc using synthetic rubber adhesive cement solvent complete all as specified and directed.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified and directed.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed.
S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall/trnches etc using synthetic rubber adhesive cement solvent complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and directed.
S&F PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl, 75mm dia. complete all as specified and directed.
R G NAIDU CIVIL CONTRACTOR AND BUILDERS (BID ID -3491456)
harshraj and co (BID ID -3491516)
ATUL ENTERPRISES (BID ID -3492204)
M/S DIVIJA BUILDERS (BID ID -3498518)
SUN AND SAND BUILD TECH (BID ID -3498274)
GUTHIKONDA BROTHERS (BID ID -3492179)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
8872tenderdocuments.pdf
Tender Documents • 2.83 MB
BOQ_828804.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .